How to replace a Tumble Dryer fixed drum shaft without having to buy a whole New Drum
Вставка
- Опубліковано 27 сер 2024
- Get your appliance fixed faster! Click the link below to browse our supplier's huge selection of appliance parts and support the channel at the same time! (repairpartstea...)
Tutorial: www.how-to-rep...
How to replace a Tumble Dryer fixed drum shaft and bearing without having to buy a whole New Drum. If you have any of the models below this is a Major money saving tip.
Hotpoint Models:
TVF760A, TVF760G, TVF760K, TVF760P, TVF770A, TVF770G, TVF770K, TVF770P, TVM560G, TVM560P, TVM562G, TVM562P, TVM570G, TVM570P, TVM572G, TVM572P,
INDESIT Models,
IDV65SUK, IDV65UK, IDV75SUK, IDV75UK, IDVA735SUK, IDVA735UK,
We hope you found this video helpful, if so you can always get Paul a beer for making this film.
Please remember to subscribe to our channel
www.youtube.co...
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or the website on your
timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-
repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels
social media as this really helps my site and keeps us going.
UA-cam. / apart4u
Facebook. / how.to.repair.appliances - Навчання та стиль
Perfect video thanks. As an amateur I did this repair easily following this video, although I drilled out the rivets from inside drum, so any burs were on back of drum then just flattened them. Also I applied a little grease to the bearing plus the shaft, will now monitor it and grease up in maybe a few months.
I'm not a firm fan of putting too much grease as this attracts dust and then sticks to it then becomes a grinding paste so I would use it cautiously although the part needs to be lubricated the bearing is made from phosphorus bronze which itself becomes a lubrication? I'm glad the video assisted you anyway. What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be UA-cam superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @agmkporter9170 please remember to subscribe to our channel as that really helps us ua-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Awesome repair !
Thanks. In my case, only the rivet had broken. After watching this video, I solved my problem without changing the drum
Thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you
I tried the shaft replacement last week, it worked great, but I found it easier to drill the rivets out
The reason I grind the rivets of are so you do not cause Burs on the inside of the drum which can tear clothes when you use the dryer, this is the right way to do but drilling can be done but you need to file of any burs that you accidentally make other people have made videos on this but they don’t tell you to make sure there are no burs, glad you found it helpful. www.how-to-repair.com/tumble-dryer-spare-parts.html
As a quick temporary fix to enable use of the dryer whilst waiting for parts or service etc, I have in the past turned the key bearing around 180 degrees and drilled a new 3mm hole tapped with the original securing screw to hold the bearing in place. Then when you have the new parts put the new bearing back in it's original position.
now that's a clever idea
AWSOME , just did this and worked perfectly as a temp repair , thanks
Thank you, ours just fell to bits. I was going to drill/tap and put in a screw or something. Such a silly design. Ill try your method as can always repair in future easy.
@AdamsWorlds please remember to subscribe to our channel as that really helps us ua-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
@@How-to-repair you could use this dryer for parts
good work! I watched your video for replacing the fan oven motor in my Neff oven. Spot on.
Fantastic,comprehensive and well explained video, hopefully once my replacement parts arrive it will be as easy as you made it look. Many thanks.
You can drill through the rivets with a 5 to 5.5mm drill and the flange plate comes off easily.
These bearings wear out all the time. I have taken to applying a little silicone grease to the shaft as part of a bi yearly service
You are life savers, excellent video, many thanks
Does the bearing need to greased with high temp grease?
my hotpoint vtd20 has the same drum shaft as this one
Great video thanks for the advice. Any advice how to get the rivets out without a grinder please? I read somewhere you could drill them out?
drill them. Thank you for leaving a comment this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
I have removed the water tank and it’s casing and now I’m struggling to put it back together have you a video how to please
Thanks! Excellent help!
Hello, I have a swan in need of this… the drum is the EXACT same as the one pictured and on the video. Will this be compatible?
For bearing is better to buy kfl08 bearing system and install. Problem solved for ever!!!
I have Indesit IDCA 8350B. Do you have a kit for this one? Thanks
Will this work on modle tvfm70bgp(uk)
Will this work on tvhm80cp model? Thanks
you can use this video for a hotpoint tvhm80c hotpoint fetv60cp
Wheres the link for the kit ??
Merci!!! Thank you!!!!
sources I have a problem with drier I EMIT indication that purge the filter while the filter is clean what to blame in the second filter that has less I find the WET is normal HELP ME thanks. model is whirlpool azb 9772
mine was mounted from the inside with a hole for the shaft to go through, and threads in the drum. I feel sorry for those who bought this crappy version. Good solution though!
The dwum shaft? Welease Woger.
john smith it's his way of talking
this repair is not worth doing just buy a new dryer
If you have time on your hands, it is worth doing not everyone can afford to buy a new machine. That's why I made the video. It is a big job but it only takes about an hour and a half half.
@@How-to-repair thanks for the info what will the tumble dryer do if the bearing shaft has worn away
It will keep cutting into the chassis and eventually cut through the bearing shaft then it's knackered unless you replace the drum shaft kit
@@How-to-repair can you please show this in an updated video
@@How-to-repair want to see you some time lovely channel