Sorry, the die won't do anything at all adjusted that way. It doesn't begin to size the case neck until the shellholder contacts the collet and then MOVES the collet (and case) up into the die body. I do hope you'll carefully read the instructions and re-do your video. Nicely shot and narrated video otherwise! I recommend disassembling the die as well. It then becomes very clear how it works.
You are using a Collect Neck Sizer die not a FL Sizer.
Please review the proper procedure to set this die . You are completely off base on this.
that does look a lot more like a Collet Neck Sizing die rather than a Full Length one
i was thinking the same thing
after u touch the shell holder you go another 1/4 turn down not back like you show
Dave, does that setting then just touch the shoulder?
My understanding is or the way I do it, use the brass holder in place before setting the die. You don't have brass holder in place.?
Sorry, the die won't do anything at all adjusted that way. It doesn't begin to size the case neck until the shellholder contacts the collet and then MOVES the collet (and case) up into the die body. I do hope you'll carefully read the instructions and re-do your video. Nicely shot and narrated video otherwise!
I recommend disassembling the die as well. It then becomes very clear how it works.
Wrong wrong wrong wrong! Not even right in the slightest! Not even right for a full length die. !
Other have mentioned it is 1/4 to 1/4 down, not up! see link leeprecision.com/single-station-die-adjustment.html
thank you
Thanks. I do it the same way.