Thanks bro! Anyway 50/50 means the antifreeze is diluted with water. Some antifreezes come full strength and need to be diluted 50/50 with water. The one i bought already was diluted so all i had to do is pour it in.
I have a 97 banshee and I’m having a hard time tuning my carbs . I’ve cleaned both carbs & jets she starts in one kick but sometimes she bogs out … can you recommend how to tune ?? The TORS are removed she runs good but after a while she starts to bog out .. any help would be appreciated @G-Money Raceyi
@@jcproductions89 you habe to put the 50/50 mix in before you start it. You should see the coolant moving a little bit. It couldve been air bound. If you let it sit over night it should fix bleed it self out unless thats not the issue
@@jcproductions89 did you have overheating issues before? Do you have an inline temperature guage? You can also find me on instagram gmoneyracing1 and message me .
"Or your girlfriend" 🤣🤣🤣
Good video !
What if I take hose clamp off an I don’t like how they had them I like mine facing toward me so I can get screw driver on them easy
Anyway you want to place it as long as its on properly and tight haha
Question. If the antifreeze says 50/50, then why did you fill the radiator all the way to the top?
Nice video bro
Thanks bro! Anyway 50/50 means the antifreeze is diluted with water. Some antifreezes come full strength and need to be diluted 50/50 with water. The one i bought already was diluted so all i had to do is pour it in.
Brother!!! Crazy I found you on another page!
I have a 97 banshee and I’m having a hard time tuning my carbs . I’ve cleaned both carbs & jets she starts in one kick but sometimes she bogs out … can you recommend how to tune ?? The TORS are removed she runs good but after a while she starts to bog out .. any help would be appreciated @G-Money Raceyi
How long u run it ?
What about filling the reservoir? Do you have to fill it to the top every time it gets low
The reservoir just fill to the full line, you shouldnt have to keep filling it after that
How long u run it
I ran it until i thought it was up to normal running operation
@@g-moneyracing127 I got my banshee built and dude put water in my radiator and I think mine was starting to overheat at 20 min idle
@@jcproductions89 you habe to put the 50/50 mix in before you start it. You should see the coolant moving a little bit. It couldve been air bound. If you let it sit over night it should fix bleed it self out unless thats not the issue
@@g-moneyracing127 engine ice is pre mixed. Imma put a fan on the radiator and try it again
@@jcproductions89 did you have overheating issues before? Do you have an inline temperature guage? You can also find me on instagram gmoneyracing1 and message me .
Lol