![G - Money Racing](/img/default-banner.jpg)
- 37
- 75 419
G - Money Racing
Приєднався 22 лют 2013
This is a channel where car and ATV/dirt bike enthusiasts can look at cool video and educational ones that i have made!
Will My 1987 Suzuki Quadracer LT250R Start????
My LT250R has not run in 2 years. The recent owner stopped driving it after it started to leak coolant between the cylinder head and jug. I started off first by filling it with coolant since it was dry. I also added oil to the case because I wasn't sure if that had oil in it either. I am going to drain and fill all the fluids on the bike the proper way. Surprisingly the bike started right up! I was extremely happy with that. It did leak coolant exactly where he said. The coolant issue could be several things. Improper torque, bad gasket, cracked head or Jug. Guess we will find out! Please leave me a comment on what you think! Also as always hit the thumbs-up button and subscribe. This series is just starting!
Переглядів: 533
Відео
Recently Bought a 1987 Suzuki Quadracer LT250R
Переглядів 7294 місяці тому
I Finally got my hands on another iconic 2 stroke bike! I am super excited about this build. I wasn't really looking for one, but I couldn't resist this purchase. The older these bikes get the harder it is to find them completely. I have all the parts for it. I even have the headlight and taillight. I am going to end up doing almost a complete resto on this. Every bushing and bearing on this qu...
New Wheel and Tire Set Up On The Gen 1 Dakota
Переглядів 404 місяці тому
We Finally got the wheel and tire set up on the Dakota and it looks so good! We did a 17x7 spiked jegs wheel up front. We wrapped that with a 235/60R17 GT Radial. We did a 15x8 Rear Spiked jegs wheel. Rear we wrapped it with a 275/60R15 Mickey Thompson et street S/S. I also bought a Hub centric, or hub ring off of eBay for cheap. Well worth it for the peace of mind that the wheel is centered. T...
Painting My Hemi Cylinder Heads With VHT High Heat Paint
Переглядів 1164 місяці тому
I Finally painted my Cylinder heads! After I soaked them in my Simple Green Extreme solution, I scuffed them dry with a red Scotch pad. After I did that, I blew the dust off and cleaned them with wax and grease remover. I put my first coat of primer on nice and light followed by two more heavier coats. After that was finished, I put two coats off the cast aluminum VHT high-heat paint. I bought ...
I have the cylinder heads off and ready to be cleaned!
Переглядів 804 місяці тому
I have the cylinder heads off of the 5.7L Hemi and I am ready to get them all cleaned up! I took out all of the valves, springs, and valve seats. The cylinder head is completely stripped. I am going to clean and resurface these heads myself. I am going to make sure the head is not warped with a mechanic's straight edge and repaint them when clean. I bought the Hemi spring tool from Amazon it wo...
We have our Engine for the Dakota!
Переглядів 474 місяці тому
We recently had a customer come in with a 13 Ram with a 5.7L Hemi come in. The truck was barely running, and we found no compression in one of the cylinders. The customer did not want to dive into the engine problem since the engine already had high mileage. We ended up putting a used engine in his truck and he let me take his old one. After inspecting the engine, I found a broken valve spring....
The Start Of A Gen1 Dakota Build
Переглядів 774 місяці тому
Here is my Gen1 Dodge Dakota I Recently inherited from a family member. I plan on taking this truck and making it a fun street truck with some power. The plan is to put a 5.7L Hemi in it and a 8HP70 Transmission. If you are looking to follow a truck build, please subscribe. It's going to be a full transformation.
Yamaha Raptor 700R
Переглядів 1534 роки тому
Here is my brother in laws new 2011 Yamaha Raptor 700R. He just recently bought it so he brought it to me to look it over. It needed a left front wheel bearing, New rear tires,oil change and a chain adjustment. I put holeshot ITP tires on it, Tusk front wheel bearing, OEM Yamaha oil filter and 10w-40 Mobil 1 4t Motor oil. This machine is a great trail bike and has ton of torque! It also has a l...
2019 Corvette ZR1 walk around and idle Must see!!!
Переглядів 2514 роки тому
2019 Corvette ZR1 comes with 755hp and 715 foor pounds of torque powered by a 6.2l v8 supercharged!It has carbon ceramic brakes for superior stopping power. This car is a beast and being a car enthusiast i was excited to get to work on one of these! I go walk around the whole vehicle showing you guys all of its great features. Yes it has a lot of carbon fiber parts! When you start this car you ...
Driving drag radials on the street!
Переглядів 694 роки тому
Hit the thumbs up button and subscribe! I've had Mickey thompson E/T street ss drag radials on my mustang for several years now. They are DOT legal so they can be driven on the street legally. Before i bought these drag radials my car couldn't hook at all in first or second gear. Thats when my car was only making 450rwhp. After that i bought these drag radials and what a world of a difference. ...
Banshee Case Saver, Slide, Guide and rollers install!
Переглядів 6 тис.4 роки тому
Here is my Video on my case saver, slide,guide and rollers install. I purchased all of my parts from TM Design Works because I liked the way the case saver was built and protected the case. I also liked the color blue that the rollers etc. came in. The reason why I ordered these parts was because a case saver will avoid cracking of the case if the chain breaks. If the chain breaks and cracks yo...
Taking my Mustang out for a well needed ride!
Переглядів 674 роки тому
We all needed a nice day to get out of the house and do what we love. so i met up with my father in law and went for a nice cruise. We hit some scenic spots in the area and i did some pulls for you guys. Hope everyone enjoyed watching the video. Make sure you subscribe and hit the thumbs up. Future videos to come!
Banshee's First in the snow with new clutch!!!! Donuts and snow!
Переглядів 1054 роки тому
This is my first Ride in the snow with my banshee. It also is my first drive with my new driveline clutch and basket in. The clutch engaged and disengaged perfectly no issues. It was about 20 degrees outside so the banshee did not get in the power band as it usually does in warmer weather. It is a 2 stroke so i took that into perspective. I am really happy with this machine because it was freez...
Banshee clutch and basket Install!
Переглядів 9374 роки тому
Here is a video on my Banshee clutch and basket install. I bought all my parts from Driveline performance. I show step by step how I installed my clutch and basket. I start off by taking off my Nerf bar, Peg , Brake pedal and the kick starter. The Brake pedal has a c clip that needs to be removed, a washer and the brake switch if you have one. It also has cotter pin and a washer that needs to b...
Top speed of my 2005 Yamaha Banshee! Let her rip!
Переглядів 17 тис.4 роки тому
Here is a video of my 2005 Yamaha Banshee top speed. I used my go pro black to connect to GPS so we can see how fast my banshee goes. I got it to 78 mph before letting out. I did not hold my throttle wide open for long at the big end i do not want to beat on my machine or hurt the motor. I believe it might have 80 mph in it. My banshee is not stock it has a DMC full exhaust, Jets, Boysen reeds,...
How to clean your 2 stroke exhaust for cheap!!! Yamaha Banshee Exhaust
Переглядів 1,9 тис.4 роки тому
How to clean your 2 stroke exhaust for cheap!!! Yamaha Banshee Exhaust
Yamaha Banshee 350 antifreeze change
Переглядів 18 тис.5 років тому
Yamaha Banshee 350 antifreeze change
2002 Ford mustang gt quick 40 mph pull
Переглядів 26110 років тому
2002 Ford mustang gt quick 40 mph pull
Liked and subscribed, ‘87 here. It’s been awhile since I had mine running. How much oil did you add to the case before you tried to start? Thanks!👍
Let me know if you need any parts. From good used stock parts all the way up to engine work and big bore kits.
Definitely am interested in a jug and piston kit.
@@g-moneyracing127 I have a number of complete top end sets. What year are you looking for?
@@BillyWillicker 87
That's a good start for an LT250r. Let me know if you need any parts. I've got lots of LT250r stuff that I need to thin out here.
Appreciate it!
Be collectors item one day. Just bought a nice lt300e and have couple 230’s. Building 230 s 87 and the e is all complete
Going to look amazing when it’s all done love the wheels
Deff can’t wait to see it all fixed up
#savesmallcontentcreators
I have parts too bro. Pretty much a whole extra roller laying around.
I appreciate that. Good to know. I may need something!!!
@g-moneyracing127 lmk bro. I have a ton of lt250r videos on my channel too, and I just picked up a 89 lt500r quadzilla
Good job
Very nice project!
Thank you
I have a 87. Best year to have. It’s the first year with the power valve and only year of the big intake. The thing is a beast.
Cant wait to find out after I fix all these issues lol definitely going to be a project for sure. Hope the bottom ends okay since 87 is a pain to get parts for.
Sweet bike. Great foundation for OEM resto.. Ive got an 88.. found out the hard way the variance in the intake configuration.. so Ive got a nice reed cage if you’re interested. Need any info, happy to help! I advise buying the clymer manual. VERY helpful! eBay is your best bet for parts.. 🍻
I appreciate it. Yes, I am definitely going to buy a manual. The 87 is more of a pain to find parts for. Its looking like a total rebuild at this point lol Pulling the head this weekend.
Who you think you is 2vintage. Lmao jk. Sick bike
Lol I wish there was a spot for a laughing face! I have a lot to catch up to 2vintage! Glad you like the bike! We will see were this goes. More content to come make sure you subscribe!
Sounds like it has some rod knock and needs a good clearing out. Other than that it runs and that's good at least. The way the coolant leaks out is making me think the head will most likely need some resurfacing hope it's not cracked or has previous damage from blowing up in the past.
I agree! I definitely heard a noise on the first start. It did clear itself out after it was running for a few. Could've been a little dry as well from sitting. We will find out more when I remove the head this weekend. I appreciate your feedback!
That’s a nice project quad to work on.I would’ve brought that too💪🏾🤘🏾👍🏾
Appreciate that man! I thought so too thats why I couldnt let it slip through my hands. All these older bikes are usually butched or taken apart. I have a new video dropping one of these days. Already filmed it. Should be a fun build. We will see where it goes.
@@g-moneyracing127 cool
come back to the channel!
Good video !
I have a 97 banshee and I’m having a hard time tuning my carbs . I’ve cleaned both carbs & jets she starts in one kick but sometimes she bogs out … can you recommend how to tune ?? The TORS are removed she runs good but after a while she starts to bog out .. any help would be appreciated @G-Money Raceyi
Hey man when you pulled the white roller off the swingarm did you have to remove anything else or the chain slider went right on at that point. doing same install noticed there is a silver piece on swingarm hoping i can leave it so i dont have to remove swingarm
What year is your banshee
I need help rebuilding my 97 banshee carbs I have the kit . If u can post a gd vid I’d really appreciate it everyone seems to show lil by lil smh
Are those cushions rubber or plastic
I want to say polyurethane
Is a bottom chain roller a must?
You want to keep all the stock compnents there. You can upgrade every roller and slide. I also have a video on that. Those rollers are there to keep the chain were it needs to be.
Yes the music blasting causes my co workers to look at me funny. The feel i should be working instead of watching your video.
Haha!! Nothing like a banshee though!
Awsome clips I understand your afraid of damaging your babe, but you where not Revving it that high it quick shifts to be exact
What if I take hose clamp off an I don’t like how they had them I like mine facing toward me so I can get screw driver on them easy
Anyway you want to place it as long as its on properly and tight haha
Lol
What the hell are you recording with? I need one for when I ride.
Go pro black edition
@@g-moneyracing127 good to know what model a 5 or 6 or newer?
@@rabbidpotatoegaming4514 not 100% sure its about 2 years old
What about filling the reservoir? Do you have to fill it to the top every time it gets low
The reservoir just fill to the full line, you shouldnt have to keep filling it after that
Is there a metal piece under swingarm chain roller that has to be removed as well
Yes i did remove my skid arm skid plate
G'day i ment when you cut the front chain roller off swing arm is there a metal collar that roller sat on that needs to be cut off the swing arm as well/thanks for your help
I want to replace original roller with TM designs chain slider
No there is no metal that needed to be cut just plastic
@@russty1745 no thats the swing arm
"Or your girlfriend" 🤣🤣🤣
What they charge for clutches
To be honest i dont remember. I bought it frome driveline
Sounds amazing dude, need a little help , i just got my banshee and i am new to it. I want to ask you about the premix ratio of petrol and oil, and can you please tell me that in liters, like 1 litre oil in how much liters petrol i should mix. I bought yamaha lube .
It should have the mixing ratio on the back of the bottle. I use amsoil dominator 2 stroke oil mix
Is it better to take the chain out?
You can do that if you want too.
i’m missing both of my adjusting screws is there a way i can do it, can i just buy two random bolts
As long as they are the proper size, i dont see why not!
thanks
@@g-moneyracing127 i already do it with out just put the quad ona jack and hit the axles back
How long u run it ?
How long u run it
I ran it until i thought it was up to normal running operation
@@g-moneyracing127 I got my banshee built and dude put water in my radiator and I think mine was starting to overheat at 20 min idle
@@jcproductions89 you habe to put the 50/50 mix in before you start it. You should see the coolant moving a little bit. It couldve been air bound. If you let it sit over night it should fix bleed it self out unless thats not the issue
@@g-moneyracing127 engine ice is pre mixed. Imma put a fan on the radiator and try it again
@@jcproductions89 did you have overheating issues before? Do you have an inline temperature guage? You can also find me on instagram gmoneyracing1 and message me .
Very good video! Only one other video on UA-cam of this caliber where the speed was captured and verified by GPS! 👍 Thanks!
Thank you
Lit make more
Hey man where’d you get those nerf bars? Can you share the link with me please💯
Not sure what brand they are. They were on there when i bought it.
Where you bought those kit? Can you giveme the link of the page?
I bought the parts from rockymountain you can call them and im sure they will help you
would u ever give it away
Never
@@g-moneyracing127 dang did u upgrade yet
Nice man!! You still have the Banshee?
Yes, I do
Give it away,, WHAT ARE U SMOKING
anda mal ese banshee xddd
79 MPH son 127 km
chill out with the music my guy. just about blew my airpod out my ear. goov vid tho
Sorry bro! Thanks for watching!!
This is dope
Thanks bud
Looks good
Thanks bro! Little at a time to clean this beast up!
ua-cam.com/video/LGUiPtq9Trs/v-deo.html
Does that drain the whole tank
Yes do that and you'll be fine
Camera work could improve a bit but other than that great thorough tutorial. thx!
Yea i could definitley agree with that! Lol thanks bud hope it helped you
@@g-moneyracing127 do you edit your videos?
@@Itz_Entropy yes
@@g-moneyracing127 I'm curious if you would consider letting me edit one of your future videos for you? (If you do make anymore) because I want to get better at video editing. But I can't edit my own videos because I can't stand to hear my own voice played back lol Just thought I'd ask.
What is the torque rating on the bolt?
No idea just tighten them! They will be fine