How to Upscale Video Resolution in Hybrid CORRECTLY | Upscale Resolution Without Loss of Quality
Вставка
- Опубліковано 26 сер 2024
- Welcome back everyone! Here I present the video that everyone was waiting for. However, some users were confused between resolution upscale and quality upscale. Resolution upscale refers to the video resolution being upscaled whereas quality upscale increases the quality of the video. This video ONLY shows you how to upscale the resolution of your video without loss of quality. But as an added bonus, I have also provided details in the video on how you can enhance your upscaled video so that It can look more visually appealing. Please watch the entire video and read the FAQs down below before asking questions in the comments. SUBSCRIBE to join DaGoose Flock!
Recommended Bitrates (If your desired output resolution does not match the resolutions below, please choose one that is closest.):
For 15 to 30FPS Videos:
480x360 (360p): Animations: 750kb/s | Films: 1,000kb/s
720x480 (480p): Animations: 1,000kb/s | Films: 2,500kb/s
1280x720 (720p): Animations: 3,500kb/s | Films: 5,000kb/s
1920x1080 (1080p): Animations: 6,500kb/s | Films: 8,000kb/s
2560x1440 (1440p): Animations: 16,000kb/s | Films: 26,500kb/s
3840x2160 (4K): Animations: 43,500kb/s | Films: 45,000kb/s
For 31 to 60FPS Videos:
480x360 (360p): Animations: 2,000kb/s | Films: 3,500kb/s
720x480 (480p): Animations: 4,500kb/s | Films: 6,500kb/s
1280x720 (720p): Animations: 8,000kb/s | Films: 9,500kb/s
1920x1080 (1080p): Animations: 12,500kb/s | Films: 14,000kb/s
2560x1440 (1440p): Animations: 25,000kb/s | Films: 26,500kb/s
3840x2160 (4K): Animations: 61,000kb/s | Films: 62,500kb/s
Recommended AVC Levels:
720p, 30FPS or below: 4.1
720p, 60FPS to 1080p, 60FPS: 4.2
1440p, 30FPS: 5.0
1440p, 60FPS: 5.1
4K, any frame rate: 5.2
FAQs:
Q: Hybrid has been flagged by my antivirus. Is it still safe to use?
A: It has been flagged on some occasions by my antivirus too. This is because the developer of Hybrid does not have a certificate for the program. Therefore, antivirus will likely flag it since most malicious programs don't have a certificate. Despite that, there is no legitimate threat with Hybrid.
Q: How do I fix VCEEncC error?
A: Make sure your GPU and CPU drivers are up to date. Try opening hybrid again. If that doesn’t work, download the latest version of VCEEncC here: github.com/rig... . When installing, you must extract the folder in Hybrid’s folder in Program files. Delete the original VCEEncC.exe and rename the new VCEEncC64.exe file into VCEEncC.exe . If all else fails, create a misc.ini file with this content in it:
[General]
ignore=VCEEnc
Q: I can't use hybrid because there is not enough space on my hard drive to start the encoder. What do I do?
A: In Hybrid, go to the "Config" tab and select the "Path" tab. You will see 3 long boxes. Find the one labeled "Default temp path". Click the arrow next to the long box and select a new destination with enough free storage for Hybrid's temporary files to be stored. All done!
▬▬▬▬▬▬▬▬▬▬▬[Links]▬▬▬▬▬▬▬▬▬▬▬
⇨ Subscribe: / dagoose
⇨ Instagram: / dagooseyt
⇨ Discord: / discord
⇨ Twitter: / dagooseyt
⇨ EasyEDA Profile: easyeda.com/Da...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
#hybrid #upscaling #video
![[NEW 2021 METHOD] How to Convert a Video to 60FPS or up to 140FPS in FrameGUI (Read Pinned Comment)](http://i.ytimg.com/vi/Fs38PwpMdo4/mqdefault.jpg)
New as of 3/29/20: Resize option can be found in filtering>Avisynth>Frame>resize
New as of 9/04/21: I will no longer be providing support for this video because the contents of it are out of date. The new guide will come in early 2022.
Thank you!
I can’t find a ‘resize’ tab or option. (I’m on 2020.12.13.1)
@@XcelsiorFan4964 update to the latest version
@@DaGoose Thank you
@@DaGoose I updated to 2021.04.12.1 but now I’m unable to select the Filtering > Avisynth tab 🤔
No need to apologize when you are helping us out by a lot.
He came back when we needed him the most
You have no idea
Thanks buddy! Been waiting for long.
You can still find all these options, just in different places.
The resizer button is in the pinned comment.
EdgeCleaner can now be found in Filtering/Avisynth/Line/Misc
DeRinging is now found in Filtering/Avisynth/DeRing
Sharpen can now be found in Filtering/FFmpeg/Filtering
Hope this is of some help.
Thanks
As of 2023/08/01 (Hybrid version 2023.03.17.1) EdgeCleaner is located in Filtering/Avisynth/Frame/Misc
I can't find the (Un-) sharpening checkbox
Edit: nevermind
Filtering -> FFmpeg -> Filtering
Ahh, Our hero
Damn, after spending the whole day looking for free software that could do the job, from open source programs that wouldn't work on my old Windows 7 machine, to online services. I finally turned to Hybrid which i've installed a while ago, and it works beautifully. Thank you friend.
Though, i've noticed the upscaled video is a tad darker than the original. I reckon it would be due to the unsharpen step right? How would you preserve the brightness of the original video?
I did everything in the video to upscale my video from 640x480 to 1920x1440, the output video is 360 mb compared to input 35 mb and i dont see any difference in the video, did i do something wrong?
Does this work for ripped DVDs, if the file was shot in HD?
can anybody help me? I have a video that was on a cassette tape, and it has a lot of horizontal lines, I would like to know how I can reduce or even remove them using the Hybrid. I already used the program to do this but it was a long time ago and today I can't remember
any updates to this brother? mine looks very different
cant find resize please help
'stats was not created' that was seen while generating a video . what was that?
I did all the steps but it crashes when exporting video 😢
I got an error that said something like "One or multiple files were not created properly!" What do I do?
This was exactly what I needed! Thank you. However, I can't seem to find the (un)-sharpen filtering option you used. Maybe it is a newer version then what you have here? I did find a "Filtering>avisynth>Sharpen/blur", but it doesn't have the same options you used. Any ideas? In any case, you gave me a start and I really appreciate it.
Things have changed in the latest version of hybrid. (un)-sharpen filtering option is located in filtering>ffmpeg>filtering
@@DaGoose Thanks a ton. It was right where you said it would be. I'm having some cropping/resizing issues, but I hope to figure them out.
Will ya be able to to squeeze in a DeNoise tutorial video? I noticed the option in Hybrid but idk which settings work best. Also thanks for the vids! Been looking for Hybrid tutorials all over and found none until I somehow came across your channel.
Yes, denoising/degraining is the next video I have planned for the Hybrid tutorial series
@ShpaTi Edits it’s too much to explain as a video description
thank you
Me too when I'm begin to process, it doesn't (Green [line] doesn't progressing) work. Do I how Fix it?
do you get an error in the logs?
Is there a way to save presets in Hybrid, and how can I quickly switch between these?
You can remember the settings in the Global Profile. The next time you start the program, first load these settings from the drop-down menu of Global Profile - right arrow. Only then load the video you are going to convert.
adn btw it crashes it says abort
Indexer didn't create please help!!!
Thanks bro i am new Subscriber
Will this work on fixing a 360p deepfake video to 1080p?
banger
thanx
video crashed: ERROR: C:\Users\U\AppData\Local\Temp\yes_2020-11-10@22_31_38_5010_04.stats was not created! whaT to ddo?
Are you using the latest version of Hybrid or an older version? That issue was supposed to be fixed in the latest version
@@DaGoose latest same
Its better Hybrid That Topaz AI and Anime2X, Ffmeg?
my video is 120fps is it possible to go to 60fps with hybrid? where to change?
Works well
I put the edits in and the quality of the video never changed, but when I look at the new details of the video they state 2560x1440 119FPS
thanks for this video, really helps a lot. i try to upscale according to the guide provided and it works well with both resolution and frame rate. is the step mentioned on this video also possible for x265, and I do have some conversion made using x265 for certain videos. and how to incorporate hdr if there`s any option? thanks
You would just select x265 as the video codec in the video processing as opposed to x264. There are no options for HDR, but if the video is HDR before you used Hybrid, then the output will still remain HDR.
@@DaGoose thanks for the info.
Thank you sir. I will play with these settings later!
My video is 1050p and i want it to go to 1080p. I follow all the steps, and its working, but my video become wider. how can i make it like scale to fit to frame?
You must have not set the output resolution to a 16:9 aspect ratio. Was your input video resolution 1867x1050 or was it something else?
HONK!(thanks)
This log is only intended for user information.
It should not be part of a bug/problem report!!
Current defaultOutputPath: is empty!
-> Set it under Config->Path
added new job with id 2020-12-10@16_26_27_2210
added new job with id 2020-12-10@16_42_44_1710
Finished startup, finished after 3.936s
Filtering input files,..
Analysing 1 input files,...
Analyzing 'Meme.mp4'.
Checking a/v ids with FFMpeg VideoAnalyser,...
Grabbing audio ids for E:\Meme.mp4.
-> Found the following audio ids: 0
Analyzing audio streams,...
Analyzing audio stream with id '0'.
Analyzing audio stream with MPlayer AudioAnalyser for id '0',...
Grabbing audio data and delay infos,...
Grabbing video ids,...
-> Video ids found: 0
Analyzing video streams...
Analyzing video stream (0).
-> Forcing time code extraction, since input is detected as vfr!
Extracting time codes from mp4 for track with id 1.
starting auto routines for source number: 1
-> finished auto routines for source number: 1
Input is completely analysed,...
Creating job for current source
-> Creating jobs for source: (1)
-> Generating calls for: E:\Meme 1080p.mp4
adding x264 calls for source: 1
createJobs for E:\Meme 1080p.mp4
creating audio subjobs,...
creating attachment extraction subjobs
creating video subjobs
creating muxing subjobs
optimizing the subJobs
-> finished creating subjobs for current source
added new job with id 2020-12-10@16_48_03_3710
starting 2020-12-10@16_42_44_1710_04_video@16:48:03.434 - E:\Meme 1080p.mp4
finished after 00:00:00.307
One or multiple files were not created properly!
-> 2020-12-10@16_42_44_1710_04_video crashed: One or multiple files were not created properly!
Aborting '2020-12-10@16_42_44_1710_04_video' due to: One or multiple files were not created properly!
How to fix this error?
@DaGoose How to fix?
One or multiple files were not created properly!
-> 2020-12-10@16_42_44_1710_04_video crashed: One or multiple files were not created properly!
Aborting '2020-12-10@16_42_44_1710_04_video' due to: One or multiple files were not created properly!
@Timothy TV it is a bug with hybrid. Please uninstall the current version of hybrid on your computer and install this slightly older version and see if it works:
www.videohelp.com/download/Hybrid_2020.01.11.1_SETUP.exe
Can ordinary videos be converted to Blu-ray? if possible, please make a video tutorial.
Alvin Apriandi I don’t think you can. Blue ray discs are specially manufactured to have more than 4.4gb of space rather than regular blank dvd drives
Ok, so after 3 hours of waiting it says video finished. Then start a new one with estimated time about 3 hours. Why ?
I dont see my video either
It’s because you probably have multiple jobs in the queue. Go to the jobs tab and ensure there is only one job.
I was wondering if you could give me an advice. When I import the VOB file to make the upscale, if I go to the crop the quality of the video gets tremenduously beautiful. But when I apply other effects or settings, the video after upscaled looses quality.
Is there a way I can use only the crop function to transform the video to 1080p and not apply any other config?
Btw, thank you for this video. It's amazing!
Just skip everything except the crop settings.
@@DaGoose I've been trying to do that, but I have the feeling i'm missing something. Anyway, thanks!!!!! Your video is amazing.
There is no Reziser under the line tab
It’s under filtering>Avisynth>Frame>resize
you may have provided also original video sample. I mean if that was 480p it should have been pixelated as hell when we watch that on 1080p on full screen
The 480p sample I provided was “pixelated as hell,” at least when looking at a big, higher-resolution screen.
How to change ratio
Change resolution according to the aspect ratio you want without using any other filter in this guide.
Hey where can u find the resixing option in the latest version??
It’s under filtering>Avisynth>Frame>resize
try using "CAS" on the sharpening tab, instead of unsharpen; which should be available in both avisynth and vapoursynth.
i dont have the Deringer and edgecleaner option as well as filtering next to the avisynth tab. Please help
Yes
Avisynth is very outdated, I'd suggest learn how to do this using Vapoursynth in Hybrid, it's the modern replacement for Avisynth.
Also, there is rarely a reason to use a 2-pass specified bit rate, use Constant Rate Factor.
For many a CRF of 19 is good enough though for some they may need to use a CRF of 18 or 17 for better quality.
This guide altogether is outdated. I’m aware that vapoursynth is new and somewhat easier. That is why I’m using vspipe in my new application, FrameGUI. 1 pass encoding will also be used in FrameGUI.
I can’t find it I don’t seem to have it on my computer I only have one thing on my computer how do I get all of the other stuff including resize so I can upscale it?
Cant find what? Please be specific.
@@DaGoose i cant fine the resize under line
It’s under filtering>Avisynth>Frame>resize
the button won't even be pressed.. it does simply nothing even tho i selected the right video.
What button
I don't know why, but it seems the filtering tab doesn't appear near the Avisynth tab in version 2020.12.13.1.
Filtering tab has moved to filtering>ffmpeg>filtering
Is there is any option that we can save the settings you just did instead of doing same thing over and over for every video, I tried to find that but found no answer
You can; follow these steps:
"You can save settings for both the x264 tab and AviSynth settings. Go to the x264 tab and set everything up the way you want it. On the bottom of the program, you will see a long drop-down labeled "Configuration:". On the right hand side of the drop-down, click the plus icon. A window will open prompting you to save an xml file. Name the file whatever you'd like. Click save. Your configuration is now saved! In order for the configuration to be applied upon opening Hybrid, you must go to the x264 tab and make sure that the configuration you made is selected in the drop-down. Next, you must select the arrow icon directly next to the drop-down. This will apply the selected configuration in the drop-down. Your settings that you saved will appear in the blink of an eye! To save the settings in AviSynth, set everything the in the way that you want it to be saved. Once you have set everything, look for the biggest drop-down towards the bottom of the program. Find the plus icon in the bottom right hand corner and then name and save the xml file. Do the same steps as you would for applying the x264 settings upon opening Hybrid. However, this time, go to the save file selection in AviSynth."
I am trying to get a youtube video from 1080p to 1440p just so I can utilize the vp09 encoder on youtube, will this method work for FPS game recordings? let me know :)
Yes, it will work.
Hello friend, how are you? Your video about the improvements is very good, I wanted to ask you if it is possible to remove the flickering effect (or I think its name is called Dot-Craw and Rainbowing) with hybrid and what filter or parameters should I use? my english is not very good, I am using translate google, I hope it is understood, thank you very much!
Hello, Great! Yes, there are options for DeCrawl and DeRainbow in Avisynth. You can find them under the Avisynth tab. I’ve never used the settings before so I can’t help you to determine which settings are best. But you can play around with them and see what works best for your video.
@@DaGoose Perfect friend, thank you very much for your answer! I hope I can find some improvement for my video, greetings from Argentina!
if i were to upscale a footage should i do it after making the footage 60fps or should i upscale the footage and then make it 60fps?
To save overall time, upscale the video first using this guide.
How do I remove artefacts from videos to upscale?
You can’t, unfortunately.
I can't see EdgeCleaner. Should I skip it?
Yes you can skip it
@@DaGoose Wow thanks for that really quick reply! Your videos really help me. I subscribed 👍
WHEN I RUN IT IT GIVES AN ERROR [ CLOSING HIBRID SINCE IT'S RUNNING WITH ADMINISTRATOR RIGHTS ] ANY SOLUTIONS PLEASE ?
please create a misc.ini file inside the Hybrid folder with the following content:
[General]
runAsAdmin=true
Hey where is the 2020 version download im using the 2021 version causing tools to be misplaced
Which 2020 version do you want? January, February, May?
@@DaGoose, the version you were using in this video
@@lauceritmnl4165 www.videohelp.com/download/Hybrid_2020.01.11.1_SETUP.exe
I follow you one step, but I got message "Helper(1) finished with exitCode: -1073741819 and exitStatus: 1
-> 18_56_13_5110_05_video crashed: Helper1, exitCode: -1073741819
Aborting '18_56_13_5110_05_video' due to: Helper1, exitCode: -1073741819", and then output nothing. Please help!
Check to make sure you don’t have multiple processes running in the background
I made it. Thank you.
Whenever I export, it says "ERROR: STATS NOT CREATED". Please help!
Dede Brooklyn To fix your issue, make sure your output video file name doesn’t have any special characters (& * ^ % () # @ $ ! {} [ ] ? > < etc). If your file name doesn’t have special characters, then you need to make some adjustments in Hybrid’s program folder. First, close Hybrid and go to the root of your hard drive. Go to: “C:\Program Files\Hybrid\32bit.” Find “AviSynth.dll” file and delete it. Right below that file should be “avisynth_mt.dll”. Rename it to “AviSynth.dll” and restart Hybrid. Lastly, follow everything in the video again and you should be all set.
wou;d the above setting applicable for x265 upscaling from 10820p to 1440 / 2160p? thanks
What setting? I don't see it.
@@DaGoose the upscale resolution of your video
@@ech33 ok in that case yes those settings are fine.
i don't know what i'm doing wrong, but my output video still looks as blurry as the input video
This guide is not supposed to increase quality to a noticeable degree. This guide is for resolution upscale only without loss of quality.
@@DaGoose my bad sorry
@@SomeUsernameSomeoneElseTookIt no worries. If you’d like to upscale resolution and quality, then I suggest using Topaz Video Enhance AI.
Every filter under the avisynth tab works except for my edgecleaner. If I check that it crashes during encoding and says "script error: there is no function named 'sminideen' (edgecleaner.avs line 51)"
Any idea how to fix that? I've reset my defaults, uninstalled and reinstalled hybrid, and updated the tools.
Dabuss55 do you have any antivirus enabled? If so, it likely removed the file for the EdgeCleaner to work. If that’s not the case, then you can skip the EdgeCleaner step.
@@DaGoose I do have an antivirus on and the Edgecleaner.avs file is the folder it's supposed to be in. There is a line "sminideen" in the script when I open it in notepad but the open edgecleaner script linked on the hybrid website doesn't have that line in it. I'm not sure why it's there and I don't know how to remove it without messing anything up.
I guess if I skip that step will there be noticeable edge artifacts in the resulting video?
Dabuss55 Ok now it seems like a bug in Hybrid. Have you tried using previous versions of Hybrid? The edge cleaner is mainly used for animations. So not using it will result in small quality drop in the edges for animations but most of the time it will not be noticeable in other types of videos unless if you zoom in the video.
Im just starting a producer channel so its realy nice having these tuturials, however how do I up/downscale a video from 1920x1080 to 1080x1920? I cannot change the 2th dimension in resolution with this method and I would realy apreicate any help, thank you!
Are you trying to convert a widescreen resolution to a portrait resolution (what you would see on a cell phone)? If that's the case, there is no way you can do that without stretching the video.
@@DaGoose Yhea it is in that case. Awell then thats to bad, thank for your help anyways 👍💪
Aww hecc yeah
for some reason the avisynth option is not available for me
do you know how to fix this?
On what OS are you using Hybrid on and did your antivirus happen to quarantine/remove the Avisynth files?
@@DaGoose I use windows and idk if the anti virus removed the files
@@24VLK that’s likely the issue. Many others have had this same issue you are having and discovered that it was their antivirus that removed the Avisynth files. Some antivirus remove Avisynth because there’s no developer certificate. I would check that and see if whitelisting hybrid will work.
Where i can download this?
0:46
@@DaGoose thanks Dude, i Will Subscribe your UA-cam channel 👍🏻
How long will it take on a upscale to 1080 20 minute video
The duration of the video won’t tell me how long the conversion will be. I don’t know the specifications of your computer either but if you want a ballpark time then it would be around 1 hour per pass (total 2 hours)
@@DaGoose Oh Ok! It worked Really good for my second video though!
filtering tab isn't there anymore
Which filtering tab is missing? There are 2 shown in the video
@@DaGoose The one in the middle like below the other filtering tab
Hi, it seems that I can't find the edgecleaner option in my avisynth. Does it change the location?
I think it did but you can skip that step. EdgeCleaner is really only for Anime and other 2D cartoons
It's now under Line/Misc.
can it upscale and export in CinemaDNG file?
The encoder can’t export to CinemaDNG file.
Hey - is there a way we can get a how to upscale using vapoursynth in hybrid by chance ? Or if you already have a video , can you link me to it please? Thanks! 🙂
I don’t use Hybrid anymore, please wait for the upscaling tutorial for EncodeGUI
@@DaGoose okay great, thanks for the reply! I’m using a Mac, can EncodeGUI be used on Mac?
EncodeGUI isn’t available for Mac yet. It is currently available on Windows and almost Linux. I’ll need more donations for the Mac release
@@DaGoose 😔 okay. Well please let me know how I can donate for Mac version.
@@KayLeshelle Donations are always appreciated as they help with the development of EncodeGUI. The donations are necessary because I would need to purchase an apple computer running macOS in order to start development. You can donate at the link below:
encodegui.com/donate.html
Can someone help with the stats error i already reinstalled my drivers and did the AviSynth.dll thing and it still gives me the message error: stats not found message
Ok, are your GPU drivers up to date?
@@DaGoose yes they are
@XXX ABXL please uninstall hybrid and install this slightly older version of Hybrid and see if it works: www.videohelp.com/download/Hybrid_2020.01.11.1_SETUP.exe
Hi Goose I need some help, after doing all the steps before i press start job it tells the input is analyzed and "x264: Current level, framerate, resolution combination is not valid. It would results in a max reference frame count of zero! -> output will not be compatible to selected profile@level!
"
Any suggestions?
What is the frame rate of the video and what resolution are you trying to upscale it to
60fps, 720x1080 to 800×1920
@@fierygamer0510 I see now. You can’t change the aspect ratio of the video while upscaling, which is why you got the error. Choose upscaling resolution of 800x1200 or 1280x1920.
Ah kk thanks then
I'm having problems with Hybrid, I'm trying to turn my 1366x720 game recording into 1080p. I have experimented and followed through the guide, but it seems that once it's done. I'll either get a blackscreen with audio or the footage but no audio.
What did you set the output resolution to
@@DaGoose I set the output resolution to 1920x1080
@@rusko8294 That’s why. You set the output resolution which is different then that of the aspect ratio in the original video. You must set the output resolution to 1920x1012 for it to work properly.
@@DaGoose Sorry, it's a 1366x768 game recording. I have set the output resolution to 1920x1012, still doesn't work.
@@rusko8294 well if it’s 1366x768 then don’t set it to 1920x1012. My final suggestion is to set output resolution to 1920x1079 but if that doesn’t work then I’m sorry I don’t know what else to do.
I tried to upscale a video from 360p to 1080p and when I started the job I got this "Aborting '2020-11-03@02_47_51_4010_04_video' due to: One or multiple files were not created properly!" can you please help me?
Please uninstall the latest version of hybrid and install this version: www.videohelp.com/download/Hybrid_2020.01.11.1_SETUP.exe
@@DaGoose i installed the version you mentioned but same problem
@DaGoose what if my video is 800x600? What settings should i use? (game capture video)
I’m not sure, what resolution would you like it upscaled to?
@@DaGoose ah, i would like it to look a crispy like 1440p?
@@auka-aimr ok set the output resolution to 1920x1440
@@DaGoose aight ty for replying :DD
hello sir goose
I have encountered the stats not created error when encoding a video. No special characters are used in the destination file. I have also made the tweaks to Hybrids program file specified in the comments but the error continues to persist. Could this be because the video in question is 75 minutes long or do I have different problem?
pls help
I haven’t updated the FAQs in a while so I forgot to add other options to fix it. What is the file format of the video you attempted to convert (mp4, mkv, etc)?
@@DaGoose the file format is .mp4
@@Peteork25 ah wait, after just reading the your question again, I noticed why the steps didn’t work in the FAQs for you. The problem you have is with the .stats file and not “.264 too small” error. To fix this, first, I suggest you reinstall your GPU drivers as the .stats error is caused when there is an issue between your GPU drivers and SVP in Hybrid.
@@DaGoose thank you good sir, reinstallation will occur. they most likely need an update anyway cuz i do not recall when the last time i updated them was. i’ll keep you posted.
Crashed: encoding video to mpeg 4 avc with x264
please copy and paste the error word for word here
One question brother, how to convert a non 60fps video to 60fps video using Hybrid without re-encoding
That’s impossible, unfortunately. You can’t just add raw interpolated frames with encoded frames.
@@DaGoose It's possible, some Indian person uploaded a video. It's very old video. I did everything he suggested and it worked. The video had a lot of dislikes but it did work for me. The only issue with doing this is that it takes too much space. A 700mb video could easily turn into 7 or 10GB. Yes it does work, trying finding the video on UA-cam.
@@100Bucks you didn’t understand what I explained. Frame interpolation is a thing, however you can’t do it without re-encoding the video. Anyone who tells you otherwise is lying.
theres no bitrates in the description?
Look under the introductory paragraph in the description
@@DaGoose thanks saw it now
Do you know how to convert videos in 60FPS without getting glitches in the video?
Unfortunately that is not possible. The encoder will always show artefacts to some degree after each conversion.
@@DaGoose oh well, but there has to be some way 🤷🏼♂️ but thanks
No, there isn’t. You can limit it to a great extent, which is what this guide aims for, but it is impossible to remove all artefacts from a video let alone prevent them.
9038 views 938 subscribers
I don’t have the avisynth available
Are you referring to the Avisynth tab being greyed out or is the Avisynth selection in the support dropdown missing?
@@DaGoose yeah but I think I fixed it. Now it just keeps crashing
@@TertiaOculus why does it keep crashing? Does it give an error?
@@DaGoose it says crashed error
And stats not created
@TertiaOculus the issue is caused by an error between your video and Avisynth. Only some videos cause this error. There is no way to fix currently but you can try to use an older version of Hybrid: www.videohelp.com/download/Hybrid_2020.01.11.1_SETUP.exe
so i watched your convert to 60fps and its downloading now. i just wanted to know could i use the 60 fps video in this and will it change the fps? thanks bro
Change it to lower or higher fps than 60?
@@DaGoose lower
@@gilbertoisabot No, this process won’t lower frame rate unless you specify it to do so.
@@DaGoose thank you bro im about to test all three of your videos on this one NBA game. When i say your three videos i mean this one, the frames one, and the quality one. thanks again man
There is no resize option
there is, It’s just under filtering>Avisynth>Frame>resize
@@DaGoose thanks sir
@@DaGoose There’s no resize option for me
Hello, anyone. So, this software can enhance 1080p video resolution to 4k? Does it?
Yes...?
@@DaGoose 720p to 4k? does it make it look stunning? Visually better?
@@NekzLvL No, this is not an AI upscaler. The differences will not be stunning.
@@DaGoose alrighty then! But did you know free ai enhancer programmes that's free?
@@DaGoose could you recommend another software for enhancing video quality?
It keeps crashing
Please be more specific. Why is it crashing and what error does it throw?
@@DaGoose When I put in the video the program just crashes with no error message.
@@Ethan52108 what is the file type of your input video and have you confirmed it’s not corrupted.
try to update your gpu driver
excuse me but why the process is crashing? do you have any suggestion? @DaGoose ?
Well first please tell me what error is causing it to crash.
@@DaGoose so i'm upscaling the video from 1080p to 1440p but, when it arrives at 1%, it draws in the client "Video crashed". (it's Sonic movie, btw)
does this help you?
Is that error from the jobs tab or the user logs?
@@DaGoose both
would you recommend upscaling this route than using an ai upscaler?
No, if possible I highly recommend an AI upscale instead
@@DaGoose why you might be active can you answer this ??
I learned about upscaling resolution and increasing fps in videos not too long ago. It's not every video I upscale, but it's not a small list either. When watching the upscaled videos they pause randomly, the sound still playing, then kick back in. I've watched them several times, and it's usually in the same areas but not at the exact frame or time, so I'm a bit confused because it doesn't seem like it's a corrupt portion or missing frames or whatever it might be. I don't know just seeing if anyone has experience with this or upscaling and has some advice. Thanks.
Edit: videos your increasing FPS and resolution I assume the best order is FPS than upscaling the resolution. correct? just seems logical but I like to confirm things.
thx again for your videos.
Software used
Hybrid - selur.de
Topaz video enhance
Hardware
Ryzen 5 1600 6 score 3200mhz
Nvidia Geforce 1080 ti FTW 3
16 gig DDR 4 3000mhz
@@CmdrTigerKing to save time, upscale first and then convert to 60fps. To fix your issue, did you upscale using Topaz or Hybrid?
@@DaGoose Ive always done FPS increases with hybrid, then the resolution upscale typically always 1920x1080 >- 3840x2160 .... I still don't know what the best settings on topaz are. All my videos I upscale are video games... Elite Dangerous to be exact.
hmm Yeah, I guess you could upscale first. My thinking was when you increased fps and the frame count having more frames with upscaled resolution would be overall better? But prolly not idk.
thanks
@@CmdrTigerKing I suggested to upscale first as there will be less frames to upscale as opposed to converting to 60fps first. This will make the process up to 3 times quicker. Use the upscale method with GC in it (computer generated content) as it consists of anti aliasing when upscaling and its perfect for gaming videos. Bitrate should be 62MBps for 4k content.
Will this also work with x265?
Yes, in 1:31, select x265 in the list.
@@DaGoose Awesome thanks!
can you do a tutorial on video interpolation and stabilization in hybrid converter?
Macky What are you referring to with video interpolation? Did you mean frame interpolation, pixel interpolation, or something else? I remember hearing that hybrid has stabilization tools so I will see how well they work...
i think that's what i'm referring to. the frame and pixel interpolation.
i hope you'll keep on posting hybrid converter tutorials. the 30 to 60fps video tutorial helped me a lot and that deserves a sub!
Macky I already have a video on frame interpolation (the 24fps/30FPS to 60fps video). Pixel interpolation is currently not possible in hybrid. Only AI tools are capable of doing that.
@@DaGoose okay sir thanks hehe hope you'll figure out the stabilization feature of hybrid asap ☺️
Bro this is different
What do you mean
Is there a way to use the GPU ?
Sure, you can use NVEnc or VCE instead of x264
@@DaGoose Thanks
@@DaGoose i have amd video card i tryed to use vce but videocard does nothing
hybrid is NOT an upscaler,just an ordinary editor that can resize a video with quality loss.The process in hybrid takes 5 minutes and upscaling is a multi-hour process.
Is this free?
Yes
@@DaGoose thank you for everything man very helpful.
whenever i do this, it shows the remaining time for 5 hours!
5 hours is a lot better than the 2 weeks that I got.
@@ansonek2343 So I'm guessing I cant upscale a movie file then :(
Tentei fazer com a versão atual mas as opções são diferentes! A solução foi baixar essa que foi utilizada no video! 😁
Conseguiu?
Topaz take an insanely long time to upscale my videos
Makes sense. It’s the AI trying in interpolate each pixel precisely.
Topaz might take a long time but at least the result of the video turns out great
You definitely need to read books. You sounds like a robot when you read your own script.
This is an old video, I have gotten better about that in more recent videos. I don’t know how “reading books” Is going to help.
@@DaGoose Reading books improves the way you read, to understand the context, words, sentences, and how to breathe. We all learn this when we are kids, when we learn how to read and write, in every school around the world, for thousands of years. Reading punctuation is essential and crucial for fluency. Not talking non-stop like a robot from the 60s with a monotone voice, without emotions, and of course without punctuations _(like reading an IKEA manual, for example)_ . The English language has a lot of fluctuations, stress, rising and falling intonations. Even if English is definitely not your first language, reading books helps a lot, yes, definitely and indeed _(especially if you read your script, in English, in this case)_ and it works for all languages, it's magic. Give it a try! - Thank you for your video, *DaGoose* . It was informative and interesting anyway.
Do you really think I’m that stupid? I know what reading books is and why we do it. I only asked the question because reading books and speaking are two different subjects. English is my first language, and it’s doesn’t matter if it is or isn’t because reading books and doing literature isn’t limited to just the English language.
@@DaGoose Stupid? No. Just a little illiterate, in a way you never or rarely read books. And yes, reading books improve the way we talk in everyday life, definitely, yes.
What does the way he talks have anything to do with this video? Nobody came for an English reading class, we came so that we can upscale our videos, I don't care if this guy's speaking a different language, as long as it's helpful.
Thank you sir! It's a shame you stopped using Hybrid and move on making on your own software EncodeGUI. Keep the good work and hopefully you'll have enough money to buy Mac to test your software for MacOS users :)
expect EncodeGUI for Mac to be released later this month
@@DaGoose Horray!!!!!!