I’ve never removed switches, but it felt like it took quite a bit of force to get that key out, even with the tool. May be why it’s snapping the pins. I could be way wrong though
Hey i thought id share Ajazz, redragon are open partners and make their keyboards in th3 same factory Same thing goes for ajazz switches (their fruit line + zorro line) and outemu as they are made in the same factory The PCB and software all work with eachother and its incredibly hilarious how you can use a 4 year old redragon software on a ajazz board made in this year They used to have HORRIBLE qc issues, ive had 3 ajazz keyboards and 1 redragon and they all broke down eventually but these recent keyboards are really good.
Yeah those are Outemu hotswap sockets. and unfortunately you are limited to some switches (MMD Holy Pandas as an example oddly enough) and well, the Outemu 3-pin switches available out there. They're too narrow for most of the MX-style switches in the market
Quick question would really appreciate the response, I'm looking to buy this on temu getting a good deal on it, I don't really care about the sound or swapping for that matter but I wanna what's the experience in gaming like are there any input lag and does it have anti ghosting? Cuz I had a Chinese keyboard before which had bad input lag like mad bad
Bro UA-cam is banned here ,i can't able to see your video, it's not loading can you please tell me should i buy it or not, i need it for writing thinking to buy brown switches one
@@Spec0 okay what are ur recommendations? i have more money i just thought if such a beautiful keyboard is only 30 i should buy it but im open to more expensive ones too
you could try to build a keyboard using the CIY Novice 68/84/100, it's a tri-mode there are tons of builds using it. There's a cheaper alternative which would be CIY tester but it's only Bluetooth and 2.4g and it can't use wired mode.
I ordered this yesterday cause it was in the budget, but man i didn't know the switch fit would be that snug, thankfully the seller I bought it from made it clear it was 3pin 🫠
I’ve never removed switches, but it felt like it took quite a bit of force to get that key out, even with the tool. May be why it’s snapping the pins. I could be way wrong though
@@tylereli7593 nah the holes for the pins are slightly smaller than standard
@@Spec0 wild lol
The switches take abit of force but that's because the switches themselves are a tight fit, other switches are much easier to pull outb
@@Spec0 Those are outemu style sockets, that are meant for outemu switches. (which is probably what brand of switch they are using)
Hey i thought id share
Ajazz, redragon are open partners and make their keyboards in th3 same factory
Same thing goes for ajazz switches (their fruit line + zorro line) and outemu as they are made in the same factory
The PCB and software all work with eachother and its incredibly hilarious how you can use a 4 year old redragon software on a ajazz board made in this year
They used to have HORRIBLE qc issues, ive had 3 ajazz keyboards and 1 redragon and they all broke down eventually but these recent keyboards are really good.
Yeah those are Outemu hotswap sockets. and unfortunately you are limited to some switches (MMD Holy Pandas as an example oddly enough) and well, the Outemu 3-pin switches available out there.
They're too narrow for most of the MX-style switches in the market
I also got my ak680 like 2 weeks ago 😱😱😱
Thank you for your review
Quick question would really appreciate the response, I'm looking to buy this on temu getting a good deal on it, I don't really care about the sound or swapping for that matter but I wanna what's the experience in gaming like are there any input lag and does it have anti ghosting? Cuz I had a Chinese keyboard before which had bad input lag like mad bad
I didn't game much on this imma be honest
And it was a few months ago so don't really remember
@@Spec0 can you tell me if you felt any sort of input lag or anything compared to other keyboards if that's possible? Would appreciate it alot ❤️
Bro UA-cam is banned here ,i can't able to see your video, it's not loading can you please tell me should i buy it or not, i need it for writing thinking to buy brown switches one
If you don't wanna swap the switches it's fine
What mods did you do? And is the sound as loud in irl as in the video? I hope its a bit quiter
It's pretty loud did tape mod foam In the case and pe foam + new switches
should i get it if i already have a rk61? (its old tho)
@@ragejay it's gonna be better but if you can save up a little more and get something better
@@Spec0 okay what are ur recommendations? i have more money i just thought if such a beautiful keyboard is only 30 i should buy it but im open to more expensive ones too
@@Spec0 or should i mod the rk61
@ragejay The aula 75 is really good, I got mine for 50 dollars in the tiktok shop which is a really good price for the board
you could try to build a keyboard using the CIY Novice 68/84/100, it's a tri-mode there are tons of builds using it. There's a cheaper alternative which would be CIY tester but it's only Bluetooth and 2.4g and it can't use wired mode.
hey are you sure the wireless version is non Outemu hot swap?
I'm pretty sure
@@Spec0 Total fit regular switches
Hello I have the wireless one and the lights wont show up
Try resetting the board or using software
That version has no light only the wired ones.
@@shubith1698 no it has lights
@@Spec0 No, only the wired version. You do reviews, always research or message the company.
@@shubith1698 mine has lighting dude
Those Keycaps looks like Xda profile... Just flat, like some standard membrane keyboard keycaps
Or it could be Mda profile
Yeh not exactly sure
@@Spec0 Ive checked on other websites.. they say these are OEM profile ABS plastic keycaps
@@charlescabbage2933 whats ABS & PBT Foubleshot?
They're XDA, according to an AliExpress seller. I'm not complaining though.
What keycap profile?
Oem from what I've heard
Its definitely XDA
2nd 😮
3rd!
first boom
@@rubykun W
I ordered this yesterday cause it was in the budget, but man i didn't know the switch fit would be that snug, thankfully the seller I bought it from made it clear it was 3pin 🫠