Qué tal inge, tengo una duda sobre tunning the PA system con el driverack pa+. porqué a veces el RTA se pone a 7 pies del parlante y otras veces se pone la distancia de la consola? y cómo funciona el segundo EQ del driverack? osea no el que stereolink sino el otro que es por vias, ya sea que primero estemos en los highs y luego los mids y lows. Lo que yo pienso sobre eso es que el EQ que es por Vía y no el stereo link, se usa con el RTA a 7 pies de las bocinas para ajustar el sonido de la caja de la bocina y que el EQ que es stereolink se usa con el RTA a la distancia de la consola para analizar el lugar del evento y así ajustar las frecuencias del sonido a ese lugar... Estaré en lo correcto? Espero pueda resolver mis dudas, gracias.
What if I don't have separate mid and high speakers? What if I just have active subwoofers and mains, should I run the mains out of the mid or high outputs?
thanks for your video. where can i find the tunings for STX800 series speakers to use with driverack pa+ or if you could tell me an alternative setting i can use. thank you again.
question when you use the rta mic to set up the eq does it set up your compressor and limiter also or just the eq and if not how do i set up the compressor and whats a good point to set up for a live dj performance
Heey, i am running a passive sub - top system, so i was thinking about puying a Driverack PX because i only low/high outputs, however i have been told the driverack PX is only for powered speakers, so i have to buy the driverack PA but here i see that the driverack PA splits te signal in low/mid/high, so my question is: CAN i use the Driverack PA with 2 subwoofers and 2 mid/top speakers (so total 4 speakers) or do i need to have 6 speakers, like subwoofers, seperate mid speakers & high speaker??
I dont have one but Im thinking I need one and I will have to return back to you for more info you seem very knowledgable and wow nice video editing did you do that too?..Im adding you ..ok
Our sound system is a little odd, we use two QSC to a dbx crossover, one goes to 2- 18" JBL woofers the other to 2-Mackies, BUT we have a couple of Samson's self powered towers (215 and horn) to reinforce sound and another couple of Samson's powered (212 & horn) that we use as monitors; can the driveRack PX or PA+ help us set-up?
Hi, My band has a Dynacord P5 system with the Dynacor PM2600 system amp, this has iys own built in crossover for the system. Can this be used without using the crossover, so just using the eq's and other effects? Cheers! :D
Hi.. Good job with this tutorial. Question, Can you save programs for different configurations? example: Bar 1, Bar 2, Moes Place, Home. Would save a ton of time. thanx Dee.
Is there a master input or output gain for each channel? My tops are set way too high compared to my lows. It does not ask if you have your high amps on bridge mode. Only your lows. I'm running four amps all bridged. QSC RMX 2450 tops & 5050 lows. Question anyone on the driverack +: Can you program via PC on real time? Or is the USB for firmware updates?
great job!. Thanks to green screen you certainly get to see the world :). I like the help you had at the end. They look very helpful!. Anyway, thanks for a great video.
Tadeusz Mezynski two subs hooked up in stereo instead of one sub in mono. or instead of having two subs in mono. this is used more in high end theaters than with music though. if not done well you have a lot of phase cancelation to deal with but if done well can greatly increase stereo separation
This guy ain't told me jack !!.. I wanna know how to connect each connector to the proper signal plug in so I don't f something up.. He's more interested in showing off its features..
beware of the crap limiters...unlees you turn off peakstop you will have a nice big distortion everytime the limiter comes in...shame on DBX for letting this through on the PA and 260 driveracks
Can we all just take a moment and apreciate how cool asf the guy looks😎
Just bought one dbx and will try to connect to my pa to see if it will work as I needed. Thanks for the instructions.
Now I understand how to set one up, I'm convinced enough to by one.
John.
How do you setup full range speakers and what outputs do you use? This thing only has low mid and hi outputs.
Nice explanation. Even better wardrobe choices. All in all great video... thanks DBX man!
Good info. Would this be sorta the same steps for a Driverack260? and What if I am using Active speakers do I need to put a amp in the amp section?
Qué tal inge, tengo una duda sobre tunning the PA system con el driverack pa+. porqué a veces el RTA se pone a 7 pies del parlante y otras veces se pone la distancia de la consola? y cómo funciona el segundo EQ del driverack? osea no el que stereolink sino el otro que es por vias, ya sea que primero estemos en los highs y luego los mids y lows.
Lo que yo pienso sobre eso es que el EQ que es por Vía y no el stereo link, se usa con el RTA a 7 pies de las bocinas para ajustar el sonido de la caja de la bocina y que el EQ que es stereolink se usa con el RTA a la distancia de la consola para analizar el lugar del evento y así ajustar las frecuencias del sonido a ese lugar... Estaré en lo correcto?
Espero pueda resolver mis dudas, gracias.
Very good and funny videos bring a great sense of entertainment!
Again any clip on recommend levels or number on both sub and mid woofers?
What if I don't have separate mid and high speakers? What if I just have active subwoofers and mains, should I run the mains out of the mid or high outputs?
Just push the next page button
@@carlosvillegas8775 haha
High.... it tekks you just follow what's i the screen and push the next page button!!!! it's just like a gameboy, I LOVE IT
Hello just to ask coz my instruments are from the top speakers. How to turn instrument from top speakers please
Very helpful - thanks for putting that up - and for traveling to so many cool places to make the video :-)
thanks for your video.
where can i find the tunings for STX800 series speakers to use with driverack pa+ or if you could tell me an alternative setting i can use. thank you again.
Do you have to set it up every time turn it on
I appreciate your video ,its makes it quiet simple to use the drive rack. Is it possible to use an equalizer with the drive.
Yes you can, but since there is the auto-eq function, there wouldn't be much of a need.
lol. wardrobe clothing change. Thanks for the tip at the end bro!
question when you use the rta mic to set up the eq does it set up your compressor and limiter also or just the eq and if not how do i set up the compressor and whats a good point to set up for a live dj performance
do u need high mid low amplifiers?? or can u run direct from the DriveRack to the speakers/ subs???
Thank you, I was experiencing Tourette’s with this thing winging it. LoL
I was blind and now I see the light, my question is, will the rack PA replace a mximizer and crossover?
Heey, i am running a passive sub - top system, so i was thinking about puying a Driverack PX because i only low/high outputs, however i have been told the driverack PX is only for powered speakers, so i have to buy the driverack PA but here i see that the driverack PA splits te signal in low/mid/high, so my question is: CAN i use the Driverack PA with 2 subwoofers and 2 mid/top speakers (so total 4 speakers)
or do i need to have 6 speakers, like subwoofers, seperate mid speakers & high speaker??
LOL nice leather jacket and shades cool breeze!
I dont have one but Im thinking I need one and I will have to return back to you for more info you seem very knowledgable and wow nice video editing did you do that too?..Im adding you ..ok
Our sound system is a little odd, we use two QSC to a dbx crossover, one goes to 2- 18" JBL woofers the other to 2-Mackies, BUT we have a couple of Samson's self powered towers (215 and horn) to reinforce sound and another couple of Samson's powered (212 & horn) that we use as monitors; can the driveRack PX or PA+ help us set-up?
What if I am NOt using speakers, amps, etc, made by Harmon International? How do I select "Meyer Sound CQ-1"?
You have any videos for the 260?
Good stuff! Do you recommend using a sonic BBE with the dbx driveRack?
Sick green screen action brah!
Hi,
My band has a Dynacord P5 system with the Dynacor PM2600 system amp, this has iys own built in crossover for the system. Can this be used without using the crossover, so just using the eq's and other effects?
Cheers! :D
Hi.. Good job with this tutorial. Question, Can you save programs for different configurations? example: Bar 1, Bar 2, Moes Place, Home.
Would save a ton of time.
thanx
Dee.
See the three minute point. You save the setting there. And again at 6:42.
Can this be used for recording? I have the Yamaha HS80M. No Amp.
Is there a master input or output gain for each channel?
My tops are set way too high compared to my lows. It does not ask if you have your high amps on bridge mode. Only your lows. I'm running four amps all bridged. QSC RMX 2450 tops & 5050 lows.
Question anyone on the driverack +:
Can you program via PC on real time?
Or is the USB for firmware updates?
is there any way to run a 4-way out of this Driverack?
Why so many buttons if all we need is "the next page button" ?
great job!. Thanks to green screen you certainly get to see the world :). I like the help you had at the end. They look very helpful!.
Anyway, thanks for a great video.
thank you from phillipines
press the next page button
Can this work with powered speaker box
yess
Can this work whit sefpower speakers?
Informative...and entertaining. thanks!
l agree and like your setting and confirmed is a good video.
Hi, sir. Kindly help me with same setup steps of Dbx260. 😊
can we drive mono 4 way line array with driverack 260 ?
Plz lemme know asap
Will it work with my Sr1530 Makies
WHAT DO YOU MEAN - MONO OR STEREO SUBS? WHAT'S A STEREO SUB?
Tadeusz Mezynski two subs hooked up in stereo instead of one sub in mono. or instead of having two subs in mono. this is used more in high end theaters than with music though. if not done well you have a lot of phase cancelation to deal with but if done well can greatly increase stereo separation
THANKS
it help me a lot , thanks!
im not sure about the mxmizer but it can replace the crossover
Nice sir turn it up
This guy ain't told me jack !!..
I wanna know how to connect each connector to the proper signal plug in so I don't f something up.. He's more interested in showing off its features..
can u make a video in how to update it
@djmisteralexxx Yes. You just plug XLR right from PA+ to speakers.
I find this hilarious.
guys i need help with my DriveRack Pa
wow i think this is a nice idea man....
job
Where The hell is the JBL SRX700 On This Thing how do i manually put it on their thing is complicated
You lost me with the wardroom clothing changing.. Mortal Kambattttt.
Thumbs up for push the next page button
beware of the crap limiters...unlees you turn off peakstop you will have a nice big distortion everytime the limiter comes in...shame on DBX for letting this through on the PA and 260 driveracks
@shiva19924 ok thank you for your information, much apreciated.
i guess that how exactly to do what you say is described in the user's manual?
Girls on video come with the DriveRack?
yes be good.thanks
Dbx 260 full 4 Bass +4 La 332 Layrr
Sattga
thanks
Bien KLARO!!!
Nic
hay en castellano?
such bad advice on so many levels. never ever boost the graphic eq!
ola algue pode postar uma video aula do dbx driverack pa em portugues?
Mande um video aula pra mim melhera meu som
plz spik to hindi
Em português
l agree and like your setting and confirmed is a good video.