DIY Geometric Wood Photobooth
Вставка
- Опубліковано 15 вер 2024
- I built this Geometric Wood Photo Booth for a photographer. He wanted to upgrade his old photo booth setup. I love how it turned out and it just looks amazing. Many people have complimented him at weddings.
-- Supplies & Tools used in the Video --
Kreg Jig
amzn.to/2gB2l2U
Jig Saw - Ryobi P523 Cordless Orbital Jig Saw
amzn.to/2w13JBx
Dewalt Router - DEWALT DWP611PK
amzn.to/2w29dvO
Cabinet Fan - AC Infinity MULTIFAN S3
amzn.to/2wAY3S2
Wire Grommet
amzn.to/2eFUzYz
Brad Nail Gun - Ryobi P320 Airstrike 18 Volt One+ Lithium Ion Cordless Brad Nailer
amzn.to/2eAabt2
Circular Saw - Hitachi C7ST 15-Amp 7-1/4-Inch Circular Saw
amzn.to/2iYxEcc
Jig Saw - Ryobi P523 Cordless 18V One Plus Jig Saw
amzn.to/2eA1H53
Brad Nailer - Ryobi P320 Airstrike 18 Volt One+ Brad Nailer
amzn.to/2wAVMGz
Danish Oil - RUST-OLEUM 242220 Watco Quart Dark Walnut
amzn.to/2eFqeJG
Gorilla Wood Glue
amzn.to/2eFUHqZ
Bessey Clamps
amzn.to/2wD6rPA
Table Saw - DEWALT DW745
amzn.to/2wAiD51
DIY Blog: www.PaulTranDIY...
Essential Safety Gear:
- Safety Glasses: amzn.to/2Ma9A4I or homedepot.sjv....
- Hearing Protection: amzn.to/2QvPy39 or homedepot.sjv....
- Dust Mask: amzn.to/2WnzMNj or homedepot.sjv....
- Respirator: amzn.to/30IZ3AR or homedepot.sjv....
- Video Equipment --
- Compact Camera - amzn.to/2eA2NxE
- Mirrorless Camera - amzn.to/2TGE0tR
- Small Tripod - amzn.to/2w1zmL5
- Regular Tripod: amzn.to/2UYmnap
- Slider - Konova Camera Slider Dolly K2 60cm (23.6 Inch)
amzn.to/2iXHOtD
- Drone - amzn.to/2HJfcQk
- Lighting: amzn.to/2YKXBvY
-- Social Media --
Instagram: / paultrandiy
Facebook: / paultrandiy
Music: www.bensound.com
Music by HookSounds: www.hooksounds.com
Disclaimer: These videos are intended for entertainment and inspiration only. Woodworking and making stuff is dangerous. Always seek professional advice and training before using any power tools. If you have any uncertainty before performing any woodworking or fabricating procedure, stop and learn a safer method. Do not attempt anything simply because you saw it in one of my videos. Summary: be smart, use common sense, and respect your power tools.
This description contains affiliate links. This helps support the channel and allows me to make more DIY videos. Thank you for the support!
Items I received at no cost / sponsorship include (some of which I may not use in the video):
1. Ryobi Power Drill
2. Ryobi Router
3. Ryobi Circular Saw
4. Ryobi Impact Driver
5. HomeRight Finish Max Sprayer
6. WeatherWash Oaked Stain & Maintenance Oil
7. Ryobi Belt Sander
8. Ryobi 12" Sliding Miter Saw
9. Ryobi Wet Saw
So talented! That booth looks amazing!
This is gorgeous!! I love this style of booth, mine isn't nearly as ornate but it was as close as I could get. Thank you for making this video, I will definitely be trying this when I need another booth!
Did you make your own booth too?
Can you share the blueprints to the leg build?!
Great work. Is there a specific app you used on the iPad to control the camera
Wow you did a great job! I might have to attempt this.
omg its beautiful!!!!
Thanks Paul! you that da best!
Truong Nguyen, assuming you’re the photographer that commissioned this, could you let me know what the light stand is that’s fixed down? Looks like a neat idea but I can’t figure out what it is. Thanks in advance!
Came out great! Good Job!
Very nice design, thanks for sharing my friend :-)
you are the man. so good
Paul I know this isn't the channel where you talk much about pharmacy, but please help! I ordered the Kaplan PCAT study book like you suggested and figured out what college courses fortify my knowledge in each of the seven sections, except the Biological Processes segment.
1. Writing PCAT segment has 1-2 courses prepping you for it: Comp 1 and/or Comp 2
2. Critical Reading segment has 1-2 courses prepping you for it: various
3. General Chemistry segment has 2 courses prepping you for it: Gen Chem 1 & 2
4. Organic Chemistry segment has 2 courses prepping you for it: O Chem 1 & 2
5. Biochemistry segment has 1 courses prepping you for it: Biochem
6. Quantitative Reasoning segment has 3 courses prepping you for it: College Alg, PreCal, Calc
Biological Processes segment, HOWEVER, could have:
4 courses prepping you for it: A&P 1& 2, (Gen Microbiology), and (Gen Bio 1).
or
8 courses prepping you for it: A&P 1& 2, (Biology of Microorganisms, Medical Microbiology), and (Genetics, Evolution, Cellular Bio, Molecular Bio).
Should I go with the 4 course (less in-depth route), or the 8 course (more in-depth route)?
I would focus on pre-req courses only for pharmacy school, do not do anything extra unless its required for your bachelors degree. Hope that helps
Thanks Paul!
I did something similar to this , but instead I used a regular wooden cabinet from ikea and a tall wooden stool also from ikea
That is a good idea. What was the model cabinet and stool you used?
thanks so much for the video bro , i am gonna build one , do you have a blog post on this ? thanks
Does anyone know what the light stand is that’s fixed down? Looks like a neat idea but I can’t figure out what it is. Thanks in advance!
you rock man...
how much did you charge him?
i build one of myself very similar to yours :) i am gonna post a video shortly
this is very nice design, which tablet do you use for program
Please tell me what software to install on your computer to make it all work?
Hi Paul, very nice video you have here.. Just curious, what did you use to hold the flash and how did you put them on the box?
The photographer I made it for told me it was part of some sort of light stand and it had 3 screws on a flange that I attached inside the bottom of the box and I cut a hole on top to thread the light stand pole through. Hopefully that helps? haha
Okay thanks!
Do you happen to have the dimensions though?
Hey Paul, do you know the app or program that was used with this booth?
i would love to purchase this for my sisters wedding!
how much would you sell it for?
Sorry this is not mine and I do not make these for commission :( Wish I could help!
How much ot cost?
what laptop / tablet do you have inside ?
Hello Paul
I'm interested in finding out if you could make one of these photo booth for me
How do I contact you directly?
Sarina
Thank you for the interest. I am not selling them right now. Possibly in the future.
How much price
Hi where does the printer goes?
What are the dimensions for this photo booth box?
hello what kind of wood did you use/
What size it’s the shell
Can i please have the dimensions
Hi. Do you have a list of all of your dimensions?
would you sell me that booth ?
What would something like this cost?
Just wood and hinges/screws I would estimate ~$100 dollars
How much would you charge?
Oh I don't make these for sale, maybe I should lots of people have been asking
@@PaulTranDIY You could easily make $1k to $2k each. Great work!