My camera gad a cable with RCA jacks and a 6" red lead at each end labeled as a trigger wire. It also had a red and a black lead. I installed black to ground and red to the black/blue lead for the reverse signal. Not sure what to do with the short red leads? Does it connect to the head unit harness wire labeled "reverse camera?"
Any side easier or better to run wire the back up camera from lic plate area to PCCM Plus direct. Drivers or passenger side? Thank you
How do you remove that interior trim? What is that interior trim piece called?
My camera gad a cable with RCA jacks and a 6" red lead at each end labeled as a trigger wire. It also had a red and a black lead. I installed black to ground and red to the black/blue lead for the reverse signal. Not sure what to do with the short red leads? Does it connect to the head unit harness wire labeled "reverse camera?"
At 14 seconds into the video you put your hand into that opening where the back panel has been removed. How do you remove that panel? TIA
pulls down and out from the top.
Any tips for accessing this grommet on a 997 cabriolet?
remove the rear speaker, it opens up some access, convertible is a bit more difficult.