Your friend is indeed fortunate to have you around! You’re clearly an experienced and talented board component level expert repair technician/engineer who can identify problems quickly and can make competent repairs. Also, I find the hardware/tool links that you have provided quite helpful. Thanks! 👏
I realize this is a Boar failure, however these collars are known for that coax to break down at the radius where it slips under the keeper rubber part. I have done 3 with this failure. Small neck dogs are the worse. Garmin made changes to the rubber keeper which has improved the failure rate a lot. BTW garmin went up a lot last year on the exchange program so you like me mite see more of these in the future. And your rite it is epoxy and I've had no luck digging it out. Great video, camera angle is great. Thumbing Up. 👍
I was just sharing a look at that side of the board with shield removed. Just in case anyone wanted to pause and look at it. We spent most of our time on the under side of the board. Nothing specific, great question. Thanks for your comment!
I do know they have the spot close to the antenna pads where a coax jack could be soldered on, but I have not done that myself to know if it would work with the housing.
60W Iron usually on SMD. 150W on the large ground plane connections such as antennae connections. I use RA rosin flux to help with the solder joint, it helps transfer heat and keep the joint clean. amzn.to/3BYkwHf
Mais ótimo vídeo, parabéns... Estou com uma T5 que perde o sinal com 60 a 70 metros. Troquei a antena mas não resolveu, e ela também não aceita comunicação. Você já viu alguma coleira t5 com esse problema?
Thanks for your comment! Sorry, I have not seen that issue myself. Only the GPS antenna damage. The RF antenna like you replaced is all I would know to try on that one...
I have a link in the video description for the GPS module and also for the cable only if needed. I also have tools that help a lot with the process in the description. Best of luck to you!
I wish I had time, I do get asked this often. I do not have a repair service at this time. I work full time+ in a Industrial job and try to have time to edit videos to post. I try to help by posting what I have learned and sharing that best I can. Best of luck to you with yours!
Hi, I have been soldering for many years as a hobby. I have learned much more about soldering in the last year or so and attempting smaller and even some micro soldering (with hot air etc.) after watching a UA-cam channel called Northridge Fix. Alex is excellent at micro soldering and is very helpful to watch and learn from. Thanks for your comment!
I wish I had time, I do get asked this often. I do not have a repair service at this time. I work full time+ in a Industrial job and try to have time to edit videos to post. I try to help by posting what I have learned and sharing that best I can. Best of luck to you with yours!
My buddy usually gets his spare parts from eBay or Amazon I believe. So for example only ... amzn.to/3LSBooA Or www.ebay.com/itm/174535927606?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=nIu09T6gRTa&sssrc=2349624&ssuid=D_qZMHXJQNK&var=&widget_ver=artemis&media=COPY
Your friend is indeed fortunate to have you around! You’re clearly an experienced and talented board component level expert repair technician/engineer who can identify problems quickly and can make competent repairs. Also, I find the hardware/tool links that you have provided quite helpful.
Thanks! 👏
Thanks for your kind comment, and I appreciate any support through any links. Thanks again and God Bless!
I realize this is a Boar failure, however these collars are known for that coax to break down at the radius where it slips under the keeper rubber part. I have done 3 with this failure. Small neck dogs are the worse. Garmin made changes to the rubber keeper which has improved the failure rate a lot. BTW garmin went up a lot last year on the exchange program so you like me mite see more of these in the future. And your rite it is epoxy and I've had no luck digging it out. Great video, camera angle is great.
Thumbing Up. 👍
What were you trying to show when you zoomed in at 9:43 ? Very interesting repair. Thank You.
I was just sharing a look at that side of the board with shield removed. Just in case anyone wanted to pause and look at it. We spent most of our time on the under side of the board. Nothing specific, great question. Thanks for your comment!
I need to buy parts for the tt15 collar, can you recommend a store? I want parts for Brazil
Not sure about Brazil in particular. My buddy always buys his from eBay.
Can these be converted to the new replaceable GPS antenna on that are on the TT20 and TT25?
I do know they have the spot close to the antenna pads where a coax jack could be soldered on, but I have not done that myself to know if it would work with the housing.
What kind soldering tools do you have and what is that stuff you put on the solder?
60W Iron usually on SMD. 150W on the large ground plane connections such as antennae connections. I use RA rosin flux to help with the solder joint, it helps transfer heat and keep the joint clean.
amzn.to/3BYkwHf
Hello, where do you find the silicone for sealing please ?
This is one example of an electronics grade silicone.
amzn.to/3IM6AFI
@@ThriftyToolShed Tanks you😄
Mais ótimo vídeo, parabéns...
Estou com uma T5 que perde o sinal com 60 a 70 metros.
Troquei a antena mas não resolveu, e ela também não aceita comunicação.
Você já viu alguma coleira t5 com esse problema?
Thanks for your comment! Sorry, I have not seen that issue myself. Only the GPS antenna damage. The RF antenna like you replaced is all I would know to try on that one...
Faça atualizações pelo garmin Express .. não use Mac computador.
Great repair🙏👍🙏👍
Muito obrigado pela sua ajuda, vc pode me dizer qual modelo de chip gps funciona ?
I have a link in the video description for the GPS module and also for the cable only if needed. I also have tools that help a lot with the process in the description. Best of luck to you!
Went to change my collars out and the plastic housing crumbled right in my hand.
Wow! That is no fun.
Do you do these repairs for the general public?
I wish I had time, I do get asked this often. I do not have a repair service at this time. I work full time+ in a Industrial job and try to have time to edit videos to post. I try to help by posting what I have learned and sharing that best I can. Best of luck to you with yours!
How did you learn to solder like that
Hi,
I have been soldering for many years as a hobby. I have learned much more about soldering in the last year or so and attempting smaller and even some micro soldering (with hot air etc.) after watching a UA-cam channel called Northridge Fix. Alex is excellent at micro soldering and is very helpful to watch and learn from. Thanks for your comment!
This is over my head. Has anybody tried cutting the cable and spliced on the new antenna?
Just remember it is a coax cable...
Bom dia meu amigo. Tenho uma coleira T cinco ela cadastra o cão más não aparece no Dog
You do get involved with some interesting devices.Thanks for the look.
How much u charge I’ve got 2 that needs this done
I wish I had time, I do get asked this often. I do not have a repair service at this time. I work full time+ in a Industrial job and try to have time to edit videos to post. I try to help by posting what I have learned and sharing that best I can. Best of luck to you with yours!
In Italia non c'è nessuno che ripara si guastano dopo 6mesi come posso fare perché non si guastano non c'è una gomma da applicare
What rubber are you asking about exactly?
A site to buy spare parts
My buddy usually gets his spare parts from eBay or Amazon I believe. So for example only ...
amzn.to/3LSBooA
Or
www.ebay.com/itm/174535927606?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=nIu09T6gRTa&sssrc=2349624&ssuid=D_qZMHXJQNK&var=&widget_ver=artemis&media=COPY
Went to change my collars out and the plastic housing crumbled right in my hand.