Yall are awesome, I can only hope to have friends like your crew. I binge watched all your build videos on each truck and they inspired me to wanna get back in a mini almost 20 years later, I just bought a 1999 4 door blazer that I'm gonna build with my son. Wish i lived closer to Maggie it would be cool to meet yall and see your trucks in person Thank yall for the awesome content. God bless you your family and the whole lower class fab crew.
@lowerclassfab431 I really would like to go it's just not in the books at the moment, however you can hold me accountable next year the blazer will be bagged and presentable.
Sure love watching your guys's videos I love the fact that you have such close friends truly it's all family keep making these great videos and one day I can jump in and start making my own lowrider keep up the great work
I really wish I could have you guys take care of my little S-10 man you’d be able to knock it out of the park because I’m on my own I would love to have the help and the knowledge because you guys kick ass doing this stuff. It’s amazing.
This was always my favorite part of being a minitrucker..building them with the club homies, then cruising when we finish! They all grew up and moved on..I'm over here trying to figure out how to body swap a 01 Blazer onto a 97 Accord! #VTECS10 😂
@@lowerclassfab431 I was thinking about drilling a hole in my shackle lower than the stock one and just maxing that out and removing the lower helper spring for now 😁 might get me like an inch and a half lower I think. But how much do the drop leaf springs lower it?
You guys got so much done in such little time!! But still had fun and thats what its all about. Not gonna lie i was hoping Rance was gonna wreck when he jumped the tiny 4 wheeler i was wishing for that jacka$$ moment 😂
Yeeeaaaaa time to move to Georgia….i wasn’t paying $3.79 for it there when it was $3.29 20 miles down the road…they gouge them prices by the interstate bad
Hey do you guys have an email or fb getting ready to bag my s10 have a couple questions love the videos watching you guys made me want to build another one
I think it would’ve been so much easier to build the frame rails for stock floor, then cut the rockers and plate them and channel the floor for the sfbd rails. Would maintain so much more headroom in the cab.
He wanted to build it like his first truck was…more headroom yes, faster and easier no….it took me weeks to get my frame built and floor tubbed…we done his whole cab in basically 8hrs(could have been less if we used original cab)…his plan is to drag it to death so nice isn’t really his concern
@@lowerclassfab431 I gotcha. I built my obs frame over a weekend. Then cut my rockers, and plated them the next. Only working on it on weekends, my buddy and I got my truck doored in 2 months and back out driving. But, I worked for a pretty big name shop for a few years, so I already knew everything that had to be done. The planning phase was basically getting the steel and cutting it. I’ve built probably more chassis’s than I could ever care to remember. Second nature at this point lol. The reason I got out of it is because I worked on everybody else’s shit and never had time for my own. All my buddies were bagged and bodied and I was still riding static lol. Anyways, cool videos, excited to see the down and dirty mini truckin builds at home in peoples garages. Where it all started. Thanks for replying! Cool shit! Let’s make minitruckin great again!!!! Also, I love the name “lower class”. Good work.
Yall are awesome, I can only hope to have friends like your crew. I binge watched all your build videos on each truck and they inspired me to wanna get back in a mini almost 20 years later, I just bought a 1999 4 door blazer that I'm gonna build with my son. Wish i lived closer to Maggie it would be cool to meet yall and see your trucks in person Thank yall for the awesome content. God bless you your family and the whole lower class fab crew.
There are shows all over the state of GA that they go to, including a show in Canton GA. It might be closer to ya 😉
I'm in Phoenix Az so it's a bit of a drive for me
So is Ben that commented on this video…he’s making the drive out to MiniNats also from Arizona…check out his channel too
@@lowerclassfab431 some people last year came from tacoma washington to mini nats!😱
@lowerclassfab431 I really would like to go it's just not in the books at the moment, however you can hold me accountable next year the blazer will be bagged and presentable.
Sure love watching your guys's videos I love the fact that you have such close friends truly it's all family keep making these great videos and one day I can jump in and start making my own lowrider keep up the great work
I really wish I could have you guys take care of my little S-10 man you’d be able to knock it out of the park because I’m on my own I would love to have the help and the knowledge because you guys kick ass doing this stuff. It’s amazing.
Awesome friends, awesome people and awesome trucks. Good job guys!
another banger vid with badass minis
Such an awesome group of friends! Love seeing these videos!
I wish I had friends like yall. Love watching these videos
Nice!!! That’s awesome guys, coming together like that. 😎
Love the channel guys s10 turned out really sharp always look forward to your new videos keep up the good work guys.
See yall at MiniNats! Wish I was bringing my s10. Hopefully I’ll run into yall
If you run it hot the middle burns out of the heat tabs
Keep us updated on the black NBS bagged crew cab 👀
First, Hope to meet you at Mini Nats in Maggie Valley.
Dang it you beat me haha
3rd again😂
You guys got more done in one day than I have in 7 years. lol
This was always my favorite part of being a minitrucker..building them with the club homies, then cruising when we finish! They all grew up and moved on..I'm over here trying to figure out how to body swap a 01 Blazer onto a 97 Accord! #VTECS10 😂
Like a billet wheel heaven 😮
The definition of friends: This video!
I already love "your idiot friend." Let's go! ---- Great friends and great times. #mininatsorbust
How you looking my dude? Coming down to the wire you gonna get it done?
How can I get the rear of my S10 lower it already has 4-inch blocks but I still want it a little lower?
Grab some drop leaf springs from Summit
@@lowerclassfab431 I was thinking about drilling a hole in my shackle lower than the stock one and just maxing that out and removing the lower helper spring for now 😁 might get me like an inch and a half lower I think. But how much do the drop leaf springs lower it?
Jesus thats horrendus lol i hate him now too😂. All the way from Texas
Shon Reese old blazer from diverse customs
You guys got so much done in such little time!! But still had fun and thats what its all about. Not gonna lie i was hoping Rance was gonna wreck when he jumped the tiny 4 wheeler i was wishing for that jacka$$ moment 😂
You got some merch coming anytime?Great video and thanks for the content.
Dam😂 they got further than i did in 6yrsin a day
I said about the same thing before I saw your post. lol
Help me understand lol but im all about the doored life but man. I bet my floor wall is a litter bigger then his lol
California regular gas price is 4.89$ a gal lol
Yeeeaaaaa time to move to Georgia….i wasn’t paying $3.79 for it there when it was $3.29 20 miles down the road…they gouge them prices by the interstate bad
@@lowerclassfab431 e85 is the way to go love the content keep up the good work
Hey do you guys have an email or fb getting ready to bag my s10 have a couple questions love the videos watching you guys made me want to build another one
Brandon Carter on FB
4.59 in California
I think it would’ve been so much easier to build the frame rails for stock floor, then cut the rockers and plate them and channel the floor for the sfbd rails. Would maintain so much more headroom in the cab.
He wanted to build it like his first truck was…more headroom yes, faster and easier no….it took me weeks to get my frame built and floor tubbed…we done his whole cab in basically 8hrs(could have been less if we used original cab)…his plan is to drag it to death so nice isn’t really his concern
@@lowerclassfab431 I gotcha. I built my obs frame over a weekend. Then cut my rockers, and plated them the next. Only working on it on weekends, my buddy and I got my truck doored in 2 months and back out driving. But, I worked for a pretty big name shop for a few years, so I already knew everything that had to be done. The planning phase was basically getting the steel and cutting it. I’ve built probably more chassis’s than I could ever care to remember. Second nature at this point lol. The reason I got out of it is because I worked on everybody else’s shit and never had time for my own. All my buddies were bagged and bodied and I was still riding static lol. Anyways, cool videos, excited to see the down and dirty mini truckin builds at home in peoples garages. Where it all started. Thanks for replying! Cool shit! Let’s make minitruckin great again!!!!
Also, I love the name “lower class”. Good work.