Ford 6610 Hub repair 2014

Repair on 4 wheel drive front Hub on Ford 6610 tractor 2014
To all that comment on the safety all the wight is being carried by the front loader the jack is only there for second safety point only.

[@kubanskiloewe]

i repaired Fords in late 80´s ....nice to see a video ! BUT guys pls never lift a axle on a hydraulic jack alone, always put under a some wooden blocks and set the hydaulic jack back from pressure !!
If you ever saw an accident happen because of such bad workmanship you will NEVER work so dangerous again !! On the other hand you dont need glasses or handclothes for that work.....always enjoy the feel of the things, the grease, oil and waerout !!

[@ukevz]

The tractor has a loader fitted witch is on the ground but yes your right you can never be too careful

[@kylieevans1016]

there is definitely a loader on the front, just cause you can’t see it in full doesn’t mean it isn’t there!

[@ukevz]

@@KS-cu1zc you can see the loader support frame its black mounted on the tractor its at the start of the video

[@kylieevans1016]

@@KS-cu1zc believe me it has a loader this tractor is a Ford 6610 they other tractor we owned was a Ford 7740 I done some of the recording of this video as it’s my husband and father in law that done the work on our tractor 🚜 😁
Regards

[@jshentee]

Thanks for new video, my unit is TT 75 New Holland, the structure is almost exactly in video

[@LuisMartinez-fi7bq]

Gracias por mostrar. Algo sencillo, rapido, eficiente y sobretodo, sin COSTO ADICIONAL de mano de obra.

[@mandylad]

Great job lads.made it look easy..great video too..

[@JamesParus]

great video, shows it all.

[@CosgroveNotts]

Safety glasses but no axle stand lol good lads

[@mcagri6496]

The loader is on the ground the forks and a jack were can it go

[@gulabk65]

I love you so much for fords

[@jayaprakesh9202]

Nice work

[@JamesParus]

great video, shows it all.

[@TheUltimate65]

Its much money to save and change the Oil. I hope you write i service book when you change it

[@allensandven0]

I kept waiting for the jack to slip out and pin a leg then 4min of watching someone bleed out after it’s lifted off. That would be way to traumatic for you young girls to go through , so be safe for there sake and your subscribers ! Please

[@jondoherty3678]

Another candidate for Shake Hands with Danger no axle stand

[@ghulabkhan762]

Good jobs

[@peturkristinsson9463]

is this similar to a 1979 MF 575?

[@jorgetapia2168]

Donde podría conseguir el eje delantero completo del tractor New Holland 6610

[@pongigergely5737]

nice !! :)

[@DavidAbella]

Are you Mclovin?

[@audbertodiazdiaz9757]

PORQUE NO PONEN EL MODELO QUE LES DOY UN LB75B NEW HOLLAND DIGEER HAY ES QUE TENGO EL PROBLEMA.

[@masseymm]

good video, how you like the price of those ZF parts?

[@ukevz]

They expensive

[@aldaircastro8226]

Top de mais este trabalho

[@JT-qf4it]

That's what lack of maintenance will do for you.

[@aluvidmetalinox5309]

Muy bueno

[@javierrecalde5611]

Necesito un cono y corona de esa trasmision, alguien tiene?

[@jimbuford4147]

Your video could be much better if you would slow down and narrate what you are doing

[@johnnydepp7012]

those lads are workers not bullshitters

[@nicolasabrassart2825]

powerstar engine?

[@mattj7910]

Carraro of ZF?

[@mattj7910]

I thought it looked zf but it differs from the one I have worked on in a couple of ways, I expected to see a large nut inside the ring gear so you can tighten the slack out of the taper roller bearings as they wear.

[@mattj7910]

Ah right, I don't doubt your right, I know the 10 series notoriously have loads of slightly different axles we have had a terrible time getting the right track rod ends for ours

[@dnrebfrodneffap]

ZF

[@kubanskiloewe]

its ZF indeed

[@vilmararaujo92]

@@kubanskiloewe apl 350 zf

[@timokuitunen1003]

Etuakselin murros

[@bryine.willis8683]

• tractor co.

[@corazones2575]

Ññññ

[@diamante5670]

Demasiado mal que tengan el gato hidráulico a todo lo que da , ta que asi es muy inestable 👎🏾