Perfect way to start my day! Thank you. 💯🔥 With almost 5k videos created I have been practicing for a while. =) I also taught middle school STEM and was able to watch kiddos use my tutorials. When I listened to where they were stuck... I could find better words to make the concepts make sense. Thanks for the note and have a great 4th!
Did you use supports in bambu studio? I ddin't see that. I'm printing one right now, but I have a feeling that the inside part of the name is going to fail/string out since it has nothing underneath. In other words, the bottom is not directly attached to the inner name. Thanks for the awesome video.
Your videos are brilliant and thanks for all the help! Maybe you can help me with how to print backlit text on a panel? I am building a Boeing 737 simulator and so far I have not found a good solution to this problem. The panels are 5mm thick and have cutouts for switches and buttons, the texts are engraved in real life. The text can be printed (despite its small size) but if I want backlighting it is more problematic. What I'm trying to do now is to cut the text out of the panel, make a copy of it with white color but only fill the top layer with this, 0,5mm thick. For the bottom layers I would need a clear filament, but I don't know if I can mix normal PLA and PETG transparent types?
Thanks for the kind words. I enjoy teaching and it makes my day when the lessons are helpful. As far as discussing your project you can reach me at hlmodtech gmail. It is likely a better way for me to bounce ideas off you.
How would you do that so the back will come off to put LEDs in it. Also is there a way to have the front all the same hight but be able to make the letters different colors.
Thanks for your video. I want to make some name plates. How do I get the special features to make the offset? I only see Default in the Shape Fill Mode section. I’m using an iPad - would that be why?
I would guess that your SVG was not the solid shape that I chose. When using pick SVG I always pick internal number two and that gets me all the options.
@@HLModTechIt seems the settings are not available on an iPad. I have used my MacBook - Success! Now to continue…thank so much for your quick replies. xo
Thanks tons for that clue!!!! I do not work with my iPad enough to have thought of that. I will add it to my mental list of why the options do not show up. I will also poke the devs and see if they can fix it. Features should not be available for just one platform.
There are tutorials for adding fonts to Tinkercad. I prefer making the text I want in a separate program (Canva, etc) and then bringing it in as an SVG. The inner line, outer line, and silhouette features are priceless!
When i slice it in prusa slicer i get a stabilitie warning long bridge extrusions. Why dont you get that warning cause it's not filled in between bottom and top? Great tutorial again
Thank you. I’m not sure about the warning. I have not messed with any settings in Bambu slicer. Just disabled the prime tower and swapped qualities. With my sign only being about 12 cm I’m not sure my spans were ever that long.
It is a premium feature of Canva. $$ The SVG export has had errors sometimes too. This is a video where I helped a user that was stuck.ua-cam.com/video/sFwJiK-sdNc/v-deo.html
This Gyro fidget is fun. ua-cam.com/video/wMXVQ6dmAIs/v-deo.html I also have a codeblocks version that is slick. ua-cam.com/video/OehFPT7pLNU/v-deo.html
Bonjour, Thank you for the video. I have been using Tinkard for a few years, but I have never seen that option " heigt - quality-file mode-corner . Where is it located and how can I activate it? Thank you.
The trick only works with SVG files. Is there any chance you are trying it with a basic shape instead? This is a trick for taking any basic shape and turn it into an SVG. ua-cam.com/video/iM1SvrvBHqU/v-deo.html
I had just stopped and started the project several times before I finished recording. All the same file just different different attempts along the way.
Im probably an idiot but can someone please explain to me how to get paint to go through all the layers in Bambu Studio? Every time i have tried it only does the top layer. Am i missing something?
It is a good question. The way I like most is to make each piece separate. I do a version of it for this creation. ua-cam.com/video/jfdDaCmiyow/v-deo.html I just chose to leave the back of the keychain solid.
Tinkercad Missing Feature FIX Distribute Ruler & Align Tips in Minutes! bit.ly/tinkfix
Wow, never seen anybody so fast/skilled with TinkerCad! Great design too!
Perfect way to start my day! Thank you. 💯🔥 With almost 5k videos created I have been practicing for a while. =) I also taught middle school STEM and was able to watch kiddos use my tutorials. When I listened to where they were stuck... I could find better words to make the concepts make sense. Thanks for the note and have a great 4th!
Great tutorial! Love how the filament changes when it is cold!
Thank you! I met the Polar Filament crew at MRRF. I believe they might have been just past your booth. Do you do the Rep Rap fest in other states too?
I LOVE YOU MAN!!!
Glad it was useful! Have a great weekend. 💯👍
Great tech friend, cheers
Thank you!
Good job and fun too👍
Thanks tons! Already put the skill to use making a fun one for a relative. 💯🔥
This is helpful. Thanks.
Glad it was helpful! Thanks tons for the note.
Nice work man
Thanks! Having a good summer so far?
@@HLModTech yes I am
thanks! Subscribed!
Awesome, thank you!
Did you use supports in bambu studio? I ddin't see that. I'm printing one right now, but I have a feeling that the inside part of the name is going to fail/string out since it has nothing underneath. In other words, the bottom is not directly attached to the inner name. Thanks for the awesome video.
I did not use supports. Mine was small enough that the stringing was minimal. Which printer and filament are you working with?
Amazing!!
Thanks! Sure do appreciate you dropping by.
Your videos are brilliant and thanks for all the help! Maybe you can help me with how to print backlit text on a panel? I am building a Boeing 737 simulator and so far I have not found a good solution to this problem. The panels are 5mm thick and have cutouts for switches and buttons, the texts are engraved in real life. The text can be printed (despite its small size) but if I want backlighting it is more problematic. What I'm trying to do now is to cut the text out of the panel, make a copy of it with white color but only fill the top layer with this, 0,5mm thick. For the bottom layers I would need a clear filament, but I don't know if I can mix normal PLA and PETG transparent types?
Thanks for the kind words. I enjoy teaching and it makes my day when the lessons are helpful. As far as discussing your project you can reach me at hlmodtech gmail. It is likely a better way for me to bounce ideas off you.
Your cool 😎.
Thank you. 💯🤩
How would you do that so the back will come off to put LEDs in it. Also is there a way to have the front all the same hight but be able to make the letters different colors.
This is my video series for making LED signs. ua-cam.com/video/fNEBQBpo8W4/v-deo.html There is a part 2 for that video where I get the fit better.
Thanks for your video. I want to make some name plates. How do I get the special features to make the offset? I only see Default in the Shape Fill Mode section. I’m using an iPad - would that be why?
I would guess that your SVG was not the solid shape that I chose. When using pick SVG I always pick internal number two and that gets me all the options.
@ OK, I created file in CANVA and saved/ downloaded as an SVG file. I’ll watch video again and try again. Thanks! xo
@@HLModTechIt seems the settings are not available on an iPad. I have used my MacBook - Success! Now to continue…thank so much for your quick replies. xo
Thanks tons for that clue!!!! I do not work with my iPad enough to have thought of that. I will add it to my mental list of why the options do not show up. I will also poke the devs and see if they can fix it. Features should not be available for just one platform.
And thinker can if I have a different font can I import it to Tinker cad
There are tutorials for adding fonts to Tinkercad. I prefer making the text I want in a separate program (Canva, etc) and then bringing it in as an SVG. The inner line, outer line, and silhouette features are priceless!
When i slice it in prusa slicer i get a stabilitie warning long bridge extrusions. Why dont you get that warning cause it's not filled in between bottom and top? Great tutorial again
Thank you. I’m not sure about the warning. I have not messed with any settings in Bambu slicer. Just disabled the prime tower and swapped qualities. With my sign only being about 12 cm I’m not sure my spans were ever that long.
I have a question why do you use pictosvg vs just downloading from Canva as an svg?
It is a premium feature of Canva. $$ The SVG export has had errors sometimes too. This is a video where I helped a user that was stuck.ua-cam.com/video/sFwJiK-sdNc/v-deo.html
Could you do a tutorial on making 3d printed infinity cubes or other fidget toys w tinkercad?
I do not have a creation tutorial, but I do have one that I have modded and shared. ua-cam.com/video/38NqT3Gcc10/v-deo.html
This Gyro fidget is fun. ua-cam.com/video/wMXVQ6dmAIs/v-deo.html I also have a codeblocks version that is slick. ua-cam.com/video/OehFPT7pLNU/v-deo.html
I have quite a few other fidget projects. This search trick is likely the slickest way to find them. ua-cam.com/video/q6KspJ8qzaA/v-deo.html
@@HLModTech aw, I was hoping to find a way to import my own cube design 👎🏿👎🏿
From Thingiverse?
I've used Canva to import fonts to Tinkercad like this. Some of the fonts imported have odd jagged edges and such. Have you noticed that?
I have. This is my work around. ua-cam.com/video/sFwJiK-sdNc/v-deo.html
So what`s the difference in printing it in a regular PLA.. against that polar version where you have to cool it afterwards?
Regular pla would keep the color from the get go. The Polar Filament is just fun. 👍
Bonjour, Thank you for the video. I have been using Tinkard for a few years, but I have never seen that option " heigt - quality-file mode-corner . Where is it located and how can I activate it? Thank you.
That menu is only available when you import an SVG. To get all the options you do need a solid SVG.
@@HLModTech Merci
👍
Thanks! Had a lot of fun with that one. =)
Sometimes when I press Ctrl-D on the object, the next one will not make me choose silhoutte!
The trick only works with SVG files. Is there any chance you are trying it with a basic shape instead? This is a trick for taking any basic shape and turn it into an SVG. ua-cam.com/video/iM1SvrvBHqU/v-deo.html
Noticed you didn't select the same STL you created when importing into Bambu Slicer. Named Sign3.stl. Any reason for that?
I had just stopped and started the project several times before I finished recording. All the same file just different different attempts along the way.
Im probably an idiot but can someone please explain to me how to get paint to go through all the layers in Bambu Studio? Every time i have tried it only does the top layer. Am i missing something?
It is a good question. The way I like most is to make each piece separate. I do a version of it for this creation. ua-cam.com/video/jfdDaCmiyow/v-deo.html I just chose to leave the back of the keychain solid.