How to Use Web Control on Denon/Marantz AV Receivers Like a Pro

Поділитися
Вставка
  • Опубліковано 2 лис 2024

КОМЕНТАРІ • 121

  • @doublet147
    @doublet147 2 роки тому +15

    If you are going to use this feature, you'll probably want to go into 'Network Control' & select 'Always On'. This way it will work even if your AVR is in 'standby power mode'. Great video Gene! I love this feature, not everyone knows about it.

  • @zenfoil
    @zenfoil Рік тому +2

    Thank you, Denon should have you as their ambassador.

  • @idr00ster
    @idr00ster 2 роки тому +6

    IThis is great, Thank you Gene! Because of your review, I purchased the 8015 a couple weeks ago but the setting for Center Spread is not available as it is greyed out and no mention of it in the manual. Thanks for all you do for the audio enthusiast!

  • @fxstd000
    @fxstd000 2 роки тому +1

    Awesome! I have a Marantz AV7702mkII and didn't know I could access this web interface. Wish I knew about this 5 years ago!! Thanks

  • @Doubledookey
    @Doubledookey 2 роки тому +4

    Very cool. Have used the phone app on my x3700h with great results. This adds another level so thankful for the info.

    • @powerguymark
      @powerguymark 2 роки тому

      What is the actual name of the app you are using? I would like to try it.

    • @Doubledookey
      @Doubledookey 2 роки тому +1

      @@powerguymark denon 2016 AVR remote. It's free.

    • @Doubledookey
      @Doubledookey 2 роки тому

      The marantz version is marantz 2016 avr remote.

  • @ericalbert4030
    @ericalbert4030 2 роки тому +2

    Thanks Gene. I didn't realize they had that feature. It's good to know when I upgrade my AVR, I will be able to use that.
    I know you love Atmos and really don't like Auro, but I would ask you to recommend the single speaker layout that supports all 3. This way the user gets to try all 3 formats and pick the one they like. Even if their AVR currently doesn't support it, if the upgrade in the future then they have the option to try the others. With the 1 speaker layout to rule them all, they don't have to worry about moving speakers. At most maybe they will add more speakers. The 30 degree is the the Atmos spec as well so it works for all the formats.

  • @abelabner
    @abelabner 2 роки тому

    Nice, I'm a big desktop guy and this rocks for me. Didn't have any idea this was available thank you much Gene. Keep Listening!!!!

  • @davidolchewsky5365
    @davidolchewsky5365 2 роки тому

    I didn't realize this with Marantz either. I have an AV8805A and previously used on screen displays to set things up. I personally love web control via IP as my Storm uses this. I will definitely use IP control for my Marantz from now on. Thank, Gene!

  • @gnicksar
    @gnicksar 2 роки тому +2

    I had no idea this option existed. Thanks Gene!

  • @doyourhomeworkthenrave
    @doyourhomeworkthenrave 2 роки тому +3

    They also have an extensive telnet command set. So you can make some pretty elaborate automation or create multiple "presets". E.g. I set the front display to "Dimm", when watching movies (DIM DIM), and have made a smart switch into a mute button (MUON), etc.

  • @JDG1971
    @JDG1971 2 роки тому

    It is certainly nice to be able to see what you have set up on your Marantz or Denon in this way... The app does indeed sometimes not work. But if it does work, then it's good enough. Thank you for this video. Nice to know that we have 3 options, to view or change our taste. Greetings from the Netherlands Limburg Maastricht and above all continue with High-end. Peace and love.
    ✌🏾😘😉And of course coffee☕👌🏾

  • @JadeB628
    @JadeB628 Рік тому +1

    I must admit. the Yamaha A6A web App is by far more detailed. not 100% perfect but very useful tool for those who want perfection. I have had this AV receiver for 4 months now I did not have enough time to read the user's manual Yet. (it might take me a year lol.
    Question for Gene. how would you compare the Marants SR8015 to the Yamaha A6A? Curious minds wanna know? Thanks, Gene.

  • @TheReverendSlim
    @TheReverendSlim 2 роки тому +1

    I feel like I should have known about the web interface since I used to use it with my older Denon... but I honestly forgot that was a thing. I just use the on-screen display. Will have to check it out.

  • @colinwilby8803
    @colinwilby8803 2 роки тому

    Thanks Gene another superb and educative video. I will now use this as my main interface with my Marantz AV receiver.

  • @mustangfred2006
    @mustangfred2006 2 роки тому +1

    This is super handy as I don't see the Marantz display when I am playing my Panasonic blu-Ray player as the audio HDMI goes right to my Marantz and the video HDMI goes directly to my tv.

  • @michaelmadsen6145
    @michaelmadsen6145 10 місяців тому

    Great this is awesome, but, can you run auddyssey from within the web app? I have a denon with a broken HDMI out.

  • @stevewithf5847
    @stevewithf5847 2 роки тому

    The Fron height Rear height config is great. Auro3D works great there. You can switch to Auromatic or DTSX pro ( neural X ) there when there to much silence upper layer with Atmos .

  • @jesusorta7723
    @jesusorta7723 Рік тому

    Thanks for this!
    I need your expertise.
    I have the same model SR8015 and I just got an emotiva use-1 to do a by pass so I can listen to my records with better quality.
    I did the installation as follows:
    I am not using the Marantz amplifiers, everything is driven by power amps.
    Keeping that in mind, I connected an RCA from the “pre amp out Front L&R” to the “HT IN” input of the emotiva, before this rca was going to the power amp so I’ve changed it.
    Then the rca from the power that drives the front speakers now is going to the “full range” output in the emotiva.
    I can listen to my records BUT I am not getting any sound from the front speakers when watching movies.
    Can you tell me what needs to be done in the configuration menu of the Marantz?
    I have tried everything to my knowledge but no results.
    Many thanks

  • @stephpehlivanian3836
    @stephpehlivanian3836 Рік тому

    hi Gene can't wait for you to review Marantz AV10-AMP10 especially the digital amp ability and how it sounds, also the web base use of the AV10 vs the SR 8015

  • @Macroproxy
    @Macroproxy 2 роки тому

    I had no idea this was possible and it is a big help.

  • @Schnauzer-2
    @Schnauzer-2 2 роки тому +1

    Excellent educational video. An additional important tool. Thanks for it.

  • @Urahara12squad
    @Urahara12squad 2 роки тому +1

    10:14 hold on hahaha Gene you're the best!
    It was a nightmare to configure my NAD. This is so much easier.

  • @Kamuigod2001
    @Kamuigod2001 2 роки тому +2

    This is fantastic! I had no idea about this. SO helpful :D

  • @michaelshafer2996
    @michaelshafer2996 2 роки тому +2

    I got the Sr5015 a few weeks ago and it is crazy how many features it is lacking versus the higher models. I really think marantz failed in that aspect for a receiver of this price. The phone app is very sluggish even on a galaxy s21 ultra but I like the control available, much more than my previous Yamaha Rx-v681 but their app was very responsive, hopefully on the higher models it is better.

  • @the_karl
    @the_karl 2 роки тому

    I. Had. No. Idea. This is so good!

  • @Ryand0523
    @Ryand0523 2 роки тому

    Hmm, I’m trying to figure out which avr I want to go with or if I should wait for a bit longer for something with more amps, for the front channel… but I may be buying a Denon x-8500ha this year, if I can find one locally for a good price, also depending on the cost of an 85 inch Sony x95k… though I could also go with a Marrantz… with support for hdmi 2.1

  • @pauljaques5333
    @pauljaques5333 Рік тому

    Although I accept your knowledge is vastly superior to mine, just 2 issues or questions.
    Lfe+ main Denon say is use the subs with all speakers and lfe only uses the subs for those speakers set to small.
    Which after talking to rel who have a video they say all speakers should be set to large with the exception of satellite speakers as most get down to 40hz and to let the subs deal with sub base.
    As the whole planet seems to contradict in this mind boggling topic I would like to say all mine are set to large and lfe + main is selected and the result is breathtaking.
    Probably wrong as normal coz that's me

  • @charlesmonroe9317
    @charlesmonroe9317 Місяць тому

    Where can you adjust the volume of the system using Web control. I've gone through all the various menus and cannot find a volume control. Note that I'm not looking for level controls, just overall volume. I have a Denon AVR-X8500H; the user interface looks identical to the Marantz

  • @RichFarren
    @RichFarren 2 роки тому +1

    That was very helpful. I didn’t know that was available. Thanks

  • @frederickwilliams3319
    @frederickwilliams3319 2 роки тому

    What AVR brand/model do you recommend in the $1500 - $2000 range for a 5.1.4 setup in a small room? Taking into account room correction software, features, etc. - but especially sound quality. Thank you.

  • @twomontess
    @twomontess 2 роки тому

    I also have the 8015. Had no idea about the web. Thanks !!!

  • @nickbessey5352
    @nickbessey5352 2 роки тому

    I'm going to check this out when I get home tonight. Any tips on setting up and using HEOS? I liked the phone app for controlling Spotify. However, since I switched to Ubquiti for routers, I've lost that connection.

  • @ELITEkickBOXER
    @ELITEkickBOXER 2 роки тому

    Hey Gene,
    While watching one of your videos last year in preparation for my home theater setup, you used some type of software that allows you to control (technically turn off or on) particular channels of your sound system without having to unplug the cables. Sorry for the vague question, but would you happen to know what I mean? (If my memory serves me correctly, and I'm not making this up)

  • @SuperStanley1984
    @SuperStanley1984 2 роки тому

    I'm running 5.2.4 but my rear Atmos speakers on top of rear surround,and front height are on wall up 10 feet high. Will I not hear Dolby Atmos sounds or do speakers have to be in ceiling? Watch Atmos movies and Atmos music but not sure I'm hearing what is Atmos? Thanks

  • @luvmtrks4366
    @luvmtrks4366 2 роки тому

    Thanks for the info Gene. I seem to get those little tidbits of info, that really counts.

  • @majorhuman
    @majorhuman 2 роки тому

    had no idea this existed. thanks! phone is a bit sluggish

  • @gaurd3
    @gaurd3 2 роки тому +4

    PEQ is one thing I miss from Yamaha. It’s kind of crazy that a brand like denon: marantz doesn’t have it

  • @richardbulot2785
    @richardbulot2785 2 роки тому

    Please help! My Denon X4700H does not have center channel ext as a selection. Is this my inability to setup or not available. Thanks, Richard

  • @Big-J-8579
    @Big-J-8579 2 роки тому

    Thanks! I have two Marantz receivers and this will work well for me.

  • @stefanklein1863
    @stefanklein1863 7 місяців тому

    Is it working the same way in the Cinema 30?

  • @naveensharma68
    @naveensharma68 Рік тому

    I have Denon AVR-X4400 connected to WiFi. I can't access it through my laptop using the IP address. Can you guide me what I need to do differently to get access to the receiver?

  • @christophehentsch1
    @christophehentsch1 2 роки тому

    Many thanks for the film. On my side I juste have one mega frustration... you maybe found the trick. In the older web interface, I could change my source for the main or zone 2 or 3. On the new one, like on your film, it seems that the bottom of the screen only allows the change for the main zone. Do I miss something? many thanks for your help

  • @gatgolf
    @gatgolf Рік тому

    Gene, question for you... do you know if a Marantz receiver can be set up to be triggered on by a 12V trigger? Additionally, I would like it to be set to a specific input after it is triggered on. Have both a 6014 and 8012 receiver, but cannot figure this out. Thanks.

  • @richardbulot2785
    @richardbulot2785 2 роки тому

    Please help, my Denon X4700H does not have a center spread selection. Please advise. Thanks so very much.

  • @user-see-s6o
    @user-see-s6o 7 місяців тому

    What does the advance option on bottom right do?

  • @Pindarm
    @Pindarm Рік тому

    I have a Denon HEOS AVR 5.1 receiver, and when I enter the IP address in Google Chrome I get "Error 403: Forbidden Access Forbidden" :( Does my reciever not support the web app, or do I need to do something else to make it work? I have a cabled network configuration, and the phone app is working flawlessly.

  • @BFBC2Zocka
    @BFBC2Zocka 2 роки тому

    What are you thinking about the new Audyssey MultEQ-X on PC? You have some options there to design your target curve for each speaker.

  • @joentell
    @joentell 2 роки тому +1

    That's pretty handy! Thanks Gene!

    • @junior-OG
      @junior-OG 2 роки тому +1

      sup auro-joe🤣👍

    • @joentell
      @joentell 2 роки тому +1

      @@junior-OG SUP!!!!!

  • @tatts4life838
    @tatts4life838 2 роки тому

    It took me tons of searching to figure out that my X6300H is just old enough to not have this feature. I really wish it did because it would make doing some stuff quicker when I was playing around

  • @joekool5676
    @joekool5676 2 роки тому

    Hi Gene, my Marantz sr8015 was able to pass audio and video from a bluray player but suddenly now only video plays without audio. Any ideas on how to fix problem?

  • @davemoore2539
    @davemoore2539 2 роки тому +1

    Source level how should we be using it

  • @builong3688
    @builong3688 2 роки тому

    Hello sir!
    Can I add a DBX driverack pA2 with my Marantz Se5011 receiver?
    Please advise
    Thank so much!!!

  • @MichaelWagnerKristensen
    @MichaelWagnerKristensen 2 роки тому

    Thank you Gene

  • @truwarrior22
    @truwarrior22 2 роки тому +2

    Caution!! The 2 channel section of the web interface is flawed! If your settings look correct but you don’t get any output from the subwoofer, change the crossover value and see if the sub starts to work else just use the TV GUI. You can always change it back once the sub starts to work. No issues with the TV GUI and 2 channel settings. I don’t think I tested after the latest update, so maybe it’s fixed. I did attempt to open a case with Marantz, but didn’t get a ticket number or anything so not sure if the actually opened the issue for further review.

    • @Audioholics
      @Audioholics  2 роки тому

      Maybe you have your mains set Large and forgot to set Bass to "LFE + Main"?

    • @truwarrior22
      @truwarrior22 2 роки тому +2

      @@Audioholics Nope mains set to small. If I recall if I switch to large then back to small. The sub doesn’t always activate when using web interface unless I change the crossover value to something else which I shouldn’t have to do. I’ll try again today since I installed another update in the last month or so. It as if it’s changing the value but not applying the change to activate the sub.

    • @truwarrior22
      @truwarrior22 2 роки тому +2

      @@Audioholics yep still flawed, set to manual and switch back and forth from small and large, it doesn’t enable or disable the sub unless you also change the crossover value… works fine in the TV GUI. I’m using a SR8015, not sure if the issue occurs on other models as well, I would assume so.

    • @Audioholics
      @Audioholics  2 роки тому

      @@truwarrior22 I am not having this problem on my SR8015 with all my speakers set to small. You shouldn't need a separate 2CH configuration. Just keep everything the same and see if that resolves your bass issue.

    • @truwarrior22
      @truwarrior22 2 роки тому

      @@Audioholics Right, but if you change your speakers to large thru the web app, does the subwoofer deactivate? I’ll make a video tomorrow. It took me a while to figure out why my subwoofer was failing to activate, however, most of the time I just assumed it was working as expected/configured.

  • @sveinjonnyhines4965
    @sveinjonnyhines4965 2 роки тому

    i had no idea about the one you can have on pc. i will definitely try this out ;D

  • @richardbulot2785
    @richardbulot2785 2 роки тому

    This great, I had no idea it existed. Thanks

  • @Nrby
    @Nrby 2 роки тому

    is there anyway to control the master volume from that interface ?

  • @tatts4life838
    @tatts4life838 2 роки тому

    I have a question about speaker distance. I used a laser just like you did and my left and Right speakers are within 1/16 of being the same distance to my main listening position. Audyssey says they are different by almost a foot. Is it ok to change what the app says to what I measured?

    • @powerguymark
      @powerguymark 2 роки тому

      I've always wondered that too.
      Should consumers view the Audyssey results as errors or corrections? I can't seem to get a straight answer but Gene seems to point to it being an error.

  • @tune7614
    @tune7614 2 роки тому

    how do u change a Internet radio station from a PC? like in the older Denon

  • @wilfredderksen
    @wilfredderksen 2 роки тому

    Hi, nice explanation! I was indeed using this(!) interface, but I was searching to provide api commands to the receiver as well. Specifically I wanted to be able to send a command which selects a radio station in HEOS/TuneIn and play it. I have a Marantz SR5013 and wondering if that's possible.

  • @michaellindquist31
    @michaellindquist31 2 роки тому

    This feature doesn’t work on my SR7012. I can only use the app. Guess I’ll have to wait until I upgrade.

  • @Dr.reese_UBR3
    @Dr.reese_UBR3 2 роки тому

    can i use this to navigate to different files on my computer to play them?

  • @hidingdissident
    @hidingdissident Рік тому

    somehow i can only see network controls on my x1000 from the web control page. what am I doing wrong?

  • @melberg9098
    @melberg9098 2 роки тому

    thx for the vid MR G. realy helpfull again

  • @powerguymark
    @powerguymark 2 роки тому

    What is the actual name of the app to download onto my phone.
    Thank you!

  • @brentreinders4759
    @brentreinders4759 2 роки тому

    Newer Denon receivers do not have this interface anymore. One big thing I miss from my 4000x not that I have a 4400H

  • @jonfoss3437
    @jonfoss3437 Рік тому

    Does it work on the avr5800, or just the best buy chinese junk

  • @dadevastator24_77
    @dadevastator24_77 2 роки тому +1

    How did you figure that 15 feet will be the best distance for your sub?

    • @Audioholics
      @Audioholics  2 роки тому +1

      Measuring the acoustical summation between the mains and subs.

    • @dadevastator24_77
      @dadevastator24_77 2 роки тому +1

      @@Audioholics did you use REW to measure?

  • @Herofmine
    @Herofmine 2 роки тому

    Thanks so much Gene, didnt know that my 8015 has it, I know it! Can you also show us how properly use Audyssey app as well?
    And what system do you use for your main home theatre room?:)

    • @Audioholics
      @Audioholics  2 роки тому +6

      We are working on Audyssey X Video soon. Stay tuned...

  • @mikegoddard7354
    @mikegoddard7354 2 роки тому

    I am curious to know, if you are using an external amp and only using 4 channels on the avr, is it best to set it at 5 channels or just leaving it at 11.x or 9.x. So if nothing is connected to the other speaker outputs, is that reducing the total power to that 70% power guarenteed? Trying to see how to get the most power out of the amp to the side and dolby atmos speakers, I am using the side surrounds and dolby atmos speakers on the avr amp only and do not want the AVR to feed channels which are not in use. LRC are on the external amp, and my unit only has 9 channels of amplification and 11 channel processing

    • @Audioholics
      @Audioholics  2 роки тому +1

      It doesn't matter. If the amps are unloaded, they aren't using power from the supply. I would use external amps for the front LCRs and internal for the rest.

    • @mikegoddard7354
      @mikegoddard7354 2 роки тому

      @@Audioholics Got it thank you, yes, the Front LCR are connected to the external amp

  • @msoles30
    @msoles30 2 роки тому

    Hey Gene any luck with getting the center spread feature back on Yamaha receivers

  • @ronwaldon7970
    @ronwaldon7970 2 роки тому

    Thanks! This is much easier to navigate. The funny thing is I've been working on networks for 30 years and never even botheedr to hit the ip address on my AVR-A110. I've always used the app or remote. I have to agree with you on the HEOS. For most things, it works fine, but I have issues with turning off zones. It seems to take forever at times, to the point of grabbing the remote to do it. I have an issue that I've heard other people have as well, and that is getting the receiver to turn on with my TV, which is a Samsung Q90t. The only way I can get it to work is if I turn on the Smart Menu. Of course, then I have to grab the remote to turn off the Smart (dumb) menu. That really pisses my wife off, so it's makes life simpler just to turn my AVR on after the TV. Anyone know a way around this? Thanks for the info.

  • @isaacsykes3
    @isaacsykes3 2 роки тому

    Is anyone else not getting test tones when trying to set the speaker levels? I can move the slider but I'm not hearing any sound.

  • @alexortner2982
    @alexortner2982 2 роки тому

    where do you get the web app? My7013 doesn't respond like your amp.

    • @idr00ster
      @idr00ster 2 роки тому +1

      You simply open a web browser (Chrome, Edge, Firefox) and input the Receiver IP address, if the 7012 has this feature you will see this, otherwise noting is returned. Your PC MUST be on the same network as receiver.

    • @alexortner2982
      @alexortner2982 2 роки тому

      @@idr00sterThe IP address that appears on the network page is nothing like the one in the video and doesn't connect the AVR to the computer. The computer and the AVR are wired to the same hub so they are on the same network.

  • @shaunrichards744
    @shaunrichards744 2 роки тому

    Yep just override the insure webpage warning and your there easy peassy.

  • @MathiasAndersson666
    @MathiasAndersson666 2 роки тому

    It dosent work on the sr7012, i heard it is becuse of HEOS.

  • @khurrumk
    @khurrumk 2 роки тому

    I have the X4700H and cannot find the center spread option.

    • @kingeo25
      @kingeo25 2 роки тому +1

      First you must be using Dolby Surround as the sound mode.
      If I remember correctly this is the sequence on the remote.
      Setup>Audio>Surround Parameter>center spread on/off

    • @khurrumk
      @khurrumk 2 роки тому +1

      @@kingeo25 Thanks, I'll try that!

  • @mediteley9869
    @mediteley9869 2 роки тому

    I put in my i.p address and got search results. Lol . what am I missing? Should I be using a specific browser?

    • @haukurorsson833
      @haukurorsson833 2 роки тому +2

      Make sure to add infront of the AVRs IP address, and also note that it's not running on the default http port (80) so you also need to append a colon and the the port number which is 10443 by default if I remember correctly.

    • @krishnataveras8734
      @krishnataveras8734 2 роки тому

      Your receiver and computer or phone have to be on the same network otherwise it wont work. If your receivers is connected via wifi and your pc is connected through ethernet they will not see each other. In my case I just wrote in the ip numbers alone and I got in. But like I said you have to be in the same network either both wifi or both via ethernet.

    • @haukurorsson833
      @haukurorsson833 2 роки тому +1

      @@krishnataveras8734 The AVR can very well be connected via WIFI while the computer is on a wired connection as long as the WIFI and the wired connections are on the same LAN, which is usually the case unless the network has been configured otherwise (VLANs, different subnets, WIFI client isolation etc. etc.)

    • @markym3870
      @markym3870 2 роки тому +1

      @@krishnataveras8734 This isn't correct. In most cases where users have just the one wifi router then the wifi is still on the same subnet as ethernet so one device being on ethernet and one on wifi is normally not an issue hence a mix of devices on either type of connection will normally talk to each other. The phone app works over the network in the same way just on a different IP port. The wifi part of a router is simply an access point. There are some 2016/17 models on which the WEB interface was removed which could be the issue.

  • @TyGamer125
    @TyGamer125 2 роки тому

    I have a denon x1400h and I can connect with the App or MultiEQ app but when I go to the IP it says "Error 403: Forbidden Access Forbidden" anyone else?

    • @brentreinders4759
      @brentreinders4759 2 роки тому

      Yes, same with AVR-4400H. I don't think the newer Denon AVRs have this anymore. There are a few things left at I.P Addres/settings/index.html

  • @julerobb1
    @julerobb1 2 роки тому

    It's really not secret. Any joe blow can type in the recievers IP Address and be directed to the web interface. Hell, even Denon covers it on their knowlber base and forums.

  • @ryanroberts9355
    @ryanroberts9355 2 роки тому

    I'm curious of what you think about the new JBL Arena EXP Car Audio Speakers? I bet they're pretty legit, I love JBL. 🏆🥇👑 The Everest's are gorgeous as well.

  • @chuckvonbeck5567
    @chuckvonbeck5567 2 роки тому

    and I'm not buying a new AV receiver until the App issue is fixed!

  • @SwirlingDragonMist
    @SwirlingDragonMist 2 роки тому

    Okee dokee

  • @isaacsykes3
    @isaacsykes3 2 роки тому

    Also, I do not have the center spread on my AV8805

  • @edwarner504
    @edwarner504 2 роки тому

    So basically the same thing my remote does….

  • @VoodooZ
    @VoodooZ 2 роки тому

    let's be honest, their app is crap! there's a reason it has 2016 in the name! ;) UI is slow and really bad.. Btw, I couldn't find Center Spread on my Denon X3700... Unless It's context sensitive?

    • @Kamuigod2001
      @Kamuigod2001 2 роки тому +1

      Center spread only becomes available if you're upmixing if I'm not mistaken. I also have the X3700H and I use the Dolby Surround Upmixer and Center Spread under "surround parameters" all the time!

  • @KmcK
    @KmcK 2 роки тому +2

    Thanks for this, Gene!
    If you want to control just about anything (including volume!!!!) from your computer (or a raspberry pi, just about anything) see this post: www.avsforum.com/threads/change-volume-with-marantz-web-interface.3191445/post-60657009