Looks like they've got them pretty much perfect now👍🏻 I've been perfectly content with my screnches but that seems like if/when I use one, I won't want to touch a traditional scrench!
That tool should be pretty good and VERY convenient to have. I’ve been thinking of getting one, it’s just that I’m going backwards financially so I’ll just have to keep thinking about it. Oh well, one day 😮
It's basically a baby scaffolding wrench, pretty neat idea. If only they could figure out a quick release insert that'll fit on odd equipment like pole saws,. Also somehow fit a t27, h4(? The Husqvarna standard) and a small carb adjustment tip they'd have it all😆
I bet these are sold for daily convenience, not necessarily to fully replace a classic scrench. I've got a 'stubby' scrench with very shallow sockets that is my 'daily' for actual work on saws apart from adjusting the chain or taking off the clutch cover it is useless.
3:01 Who does that? First release the tension with your scrench then spin the tool 360 degrees. No need to keep taking it off the nut & replacing it. Better still, release the nut with a scrench then use a cordless drill with a socket adapter to spin it all the way in less than a second. Full wrap handle? Get a shortie scrench or a regular scrench and cut off the side you're not using. As for the ratchet scrench, once the initial tension is released the nut is already too loose for a ratchet to work properly. Seems like an expensive solution for a problem that doesn't exist.
I just got one two weeks ago from baileys. No idea if it’s version I II or III. Haven’t really used it so can’t say but the one thing I did notice was that the ratchet mechanism was courser and had more drag than ideal. Will it matter? Likely no but figured I’d mention it. Great idea regardless for sure 👍🏼
Looks like they've got them pretty much perfect now👍🏻
I've been perfectly content with my screnches but that seems like if/when I use one, I won't want to touch a traditional scrench!
👍🆙AP
That's what wcs raker guages or tuning screwdrivers are for. Never would've discovered that. I don't envy product designers one bit
That tool should be pretty good and VERY convenient to have. I’ve been thinking of getting one, it’s just that I’m going backwards financially so I’ll just have to keep thinking about it. Oh well, one day 😮
The screw driver part really only for chain adjustment screw which doesn't require much force
It's basically a baby scaffolding wrench, pretty neat idea. If only they could figure out a quick release insert that'll fit on odd equipment like pole saws,. Also somehow fit a t27, h4(? The Husqvarna standard) and a small carb adjustment tip they'd have it all😆
Yes and a suitcase to fit it into while they're at it!
I have a couple saws you need a deep type socket to get the plug out. I think my ms250 is one of them. But I will get one for sure!
I bet these are sold for daily convenience, not necessarily to fully replace a classic scrench. I've got a 'stubby' scrench with very shallow sockets that is my 'daily' for actual work on saws apart from adjusting the chain or taking off the clutch cover it is useless.
👍👍
Looks like a awesome tool gon look in 2 maybe gettn a couple of em
3:01 Who does that?
First release the tension with your scrench then spin the tool 360 degrees. No need to keep taking it off the nut & replacing it.
Better still, release the nut with a scrench then use a cordless drill with a socket adapter to spin it all the way in less than a second.
Full wrap handle? Get a shortie scrench or a regular scrench and cut off the side you're not using.
As for the ratchet scrench, once the initial tension is released the nut is already too loose for a ratchet to work properly. Seems like an expensive solution for a problem that doesn't exist.
I just got one two weeks ago from baileys. No idea if it’s version I II or III. Haven’t really used it so can’t say but the one thing I did notice was that the ratchet mechanism was courser and had more drag than ideal. Will it matter? Likely no but figured I’d mention it. Great idea regardless for sure 👍🏼
Been wanting one. I guess now's the time.👍👍
Next time you have his ear, mention the thickness but see if he might create an XL model ratcheting scrench for a little better leverage
Looks good
👍🆙BigGuy
Genius
How does the shorter length of the head work with removing/replacing a spark plug? That would be my question
How well does it work on a spark plug 🤣🤣🤦🏻♂️
Is this the same one sold through Baileys? I was thinking of getting one from them.
yes
Boedy , I don’t know how to message you directly but a Jonsered cs 2238 in dece shape is for sale in my area for 80. 👍🏼/👎🏼 sir?