@@li-ly-li amazing to hear it helped. Its a common problem with the material of the weight as it corrodes. Please subscribe to my channel when you get 5 minutes it really helps the channel to grow
My Combi Classic Vax had a rumbling noise when trying to steam, the little weight ball doesn’t come out so I poured vinegar in and left it for ten minutes, then topped it up with water and it worked, steam was pouring out and I’m so pleased, nearly ordering a new one
Aaahhh that's amazing news I'm so pleased to hear you didn't have to replace it. Things are getting so expensive and where we can all save we need to. Don't forget to subscribe to my channel and like the video If you haven't already. Thanks for your support 👍
Thank you for sharing your tutorial, I forgot about these little jet's. I am getting good steam pressure...now another problem has occurred...steam coming from the bottom of shaft that leads to the head..I can imagine I need new rubber seals.. thanks again...getting further with this steam mop. Have a great day.
Hi @michaellyne8773 thanks for your comment and I'm glad it's helped. The second problem will more than likely be the O ring. A simple fix. Please subscribe to my channel If you haven't already. It really helps it to grow. Have a great day
@@cleanmateltd737 thanks again, I will have try that O ring I may get on the vax website as I feel sure the seals and O ring may differ from b&q. I believe it is the O ring as when I press the head down the steam from between the shaft and head the steam subsides. Other than that there is pressure now. I am yet also to clean the water container parts...I wouldn't want to pull them out incase they don't go back properly lol. it is strange in your tutorial that our 9 in 1 vax steam mop should just pack up suddenly.. just shows how much we take these gadgets for granted
Thank you, everything was clear but just not quite what the user expected. Happy to clean my own floor to test gain, having sourced a couple of extra cleaning pads online: great that these are washable and reusable 😊
Best advice fixed my steamer, two sessions of bicarbonate of soda not sufficient so needle treatment needed!!! All went well no steaming like a Welsh Dragon great advice many thanks👏👏👏👏👏 Going
Fantastic thank you very much for the feedback. Please like the video and subscribe to my channel. It really helps my channel to grow and the algorithm
Amazing Im so pleased the video is helping. So many people have been commenting saying its helped. Please subscribe to my channel as it helps me grow. Thank you so much again for your feedback
Amazing Stacey I love hearing my videos are helping. There are so many items thrown out and replaced when in most cases its a simple fix. Would appreciate a share and subscribe when you get 5 minutes free. My channel is growing slow and steady which is great. Thanks for your support
Hello, just watched your video and have checked my cleaner as you have shown. My steamer is still not working. I press the trigger and nothing - lights are on, water heating up but not doing anything. Can you help?
Ah fantastic Glenys Kiff I love hearing that people are benefitting from my videos. I want to make so many more. Please subscribe to my channel and like the video it will really help me. Also If you have any suggestions of videos you would like me to make please tell me about them.
Thank you so much for the video!!!! I did everything and also bought a new filter which still didn’t work until I found your video 😊😊😊 Thanks again !!!
Really pleased it worked. Sometimes it's a simple fix. I am trying to build my channel and upload useful videos as often as I can. Please like and subscribe to my channel when you get a spare 5 minutes If you haven't already. Thank you
Glad you liked the video Brian, If you haven't subscribed to my channel already please do. It really helps my channel growth and I am open to suggestions to improve my content or make a specific video on request. Thanks again
I have a little bit of steam coming through when using the pole handle and without. The steam button doesnt press in at all on the body of the steamer. I have cleaned the ball, holes etc. Both lights comes on and it gets hot but not working fully.
Same here, I thought it was mine had a problem due to been stod with water in. But borrowed a friends exactly the same. Friend used it very recently - same problem😢
@@kickilamerton I started pokin a spike into wher that little filter with the balls in and it started letting steam through, so I think it's something to do with that
Hi Thomas, is it the clear flexible hose or is it a black hose with a wire coil all the way through?There were 2 models of bare floor but generally they only have a cleaning hose attachment If the centre of the machine detaches with its own independent handle. Please subscribe to my channel when you get 5 minutes it will be much appreciated
@@cleanmateltd737 hi ,no it's a grey coloured flexible hose with a attachment for cleaning sofa etc ,but I've decided it's not for this type of steamer I doubt
Really good, I had a similar issue with mine a later model where it has two tanks one for water and one for detergent both been blocked by limescale build-up, drilled through it and as good as new. Thanks, you saved me from throwing it away and buying another one unnecessarily. You owe me apint
Ah fantastic I'm glad to hear you were able to fix it. I have a lot of experience in cleaning and repairs etc so I'm starting to put my knowledge online to help others. Glad you liked the video. Please subscribe to help my channel grow. Take care
Hello, do you have any tips for fixing the trigger/handle? Mine is having a problem where the machine will not work if you press the handle trigger, but the multifunction removeable unit is working. The trigger seems to be depressing all the way (I took the handle apart), but for some reason not getting enough pressure to press down the button on the multifunction unit that it needs to depress. I was wondering about doing a vinegar clean? I also ordered new filters. I took apart the tank and cleaned it too and cleaned all the steam holes. Thank you for any help you can give. I live in the UAE so repair shops for this type of thing are a bit scarce here...
@@philipbwardltd599 thanks for watching the video and I hope you will return to watch more at a later date as we are trying to upload more regularly. Please subscribe If you haven't done so already it really helps the channel to grow 😁😁
Thank you very much for your support. Please subscribe to my channel and like the video If you haven't already. It really helps with the UA-cam Algorithm 😁
Hya butty, I'm in Wales as well. So in 22 I had my PS001 Pifco steam cleaner unblocked by a local shop. Now it's showing the dreaded green light again! I checked the lill ball, that's fine. Also used a cleaning pin, an it doesnt appear to be blocked. What else could it be?
Amazing glad it helped. Can you subscribe to my channel If you haven't already please? It really helps support the growth. If you have any ideas for videos you would like to share please feel free to comment or DM. Thank you
Hey buddy, thanks for the video we have change the filter and clean everything as you mentioned and still no steam is coming .How can I fix this please help
Hi there, I’ve done that but the machine is still not steaming properly. Thank you for this video but I feel that these videos need to address as many issues as possible as it’s not always going to be the one thing. I do not know what else to check for and how to fix mine.
Hi there, hope you can help me too ,my steamer is only intermittently steaming ,and the water is leaking really fast ,I have cleaned the holes which you shown in your video which were clean really , my steamer is the exact same one you have got in your video. Thank you in advance, Vera
Good Luck Sarah I hope it works and please subscribe to receive our latest videos. We are currently in the middle of filming cleaning advice videos and are hoping to build our channel up to deliver useful and quality packed videos.
First off, do you sell parts? If so, I think I need a new water pump. When I connect a pipe direct to the pump (from reservoir) water trickles out, but once I connect the filter and reservoir, (pump makes a noice) nothing comes out. Also, do you sell the three way pipe from pump outlet to heater? Many thanks David.
It sounds like the pressure switch is jammed. Pull the head away from the machine (keeping attached) and push towards. Back and forth a few times. It should loosen up. If you haven't already please subscribe as it really helps my channel to grow. I appreciate your support
Thanks Mally really appreciate the feedback it really helps me to make better content. I'll find out what volume was used and lower it in future videos
Fantastic thank you very much for the feedback. Please like the video and subscribe to my channel. It really helps my channel to grow and the algorithm elbowcough
Wish youtubers would all stop putting bloody loud music on all the way through their videos whilst explaining things, soooooooooo damn annoying, it's really not needed.
You've saved me money and a trusted steamer from the landfill. Thank you. It was the hole in the weight.
@@li-ly-li amazing to hear it helped. Its a common problem with the material of the weight as it corrodes. Please subscribe to my channel when you get 5 minutes it really helps the channel to grow
My Combi Classic Vax had a rumbling noise when trying to steam, the little weight ball doesn’t come out so I poured vinegar in and left it for ten minutes, then topped it up with water and it worked, steam was pouring out and I’m so pleased, nearly ordering a new one
Aaahhh that's amazing news I'm so pleased to hear you didn't have to replace it. Things are getting so expensive and where we can all save we need to. Don't forget to subscribe to my channel and like the video If you haven't already. Thanks for your support 👍
Thank you for sharing your tutorial, I forgot about these little jet's. I am getting good steam pressure...now another problem has occurred...steam coming from the bottom of shaft that leads to the head..I can imagine I need new rubber seals.. thanks again...getting further with this steam mop. Have a great day.
Hi @michaellyne8773 thanks for your comment and I'm glad it's helped. The second problem will more than likely be the O ring. A simple fix. Please subscribe to my channel If you haven't already. It really helps it to grow. Have a great day
@@cleanmateltd737 thanks again, I will have try that O ring I may get on the vax website as I feel sure the seals and O ring may differ from b&q. I believe it is the O ring as when I press the head down the steam from between the shaft and head the steam subsides. Other than that there is pressure now. I am yet also to clean the water container parts...I wouldn't want to pull them out incase they don't go back properly lol. it is strange in your tutorial that our 9 in 1 vax steam mop should just pack up suddenly.. just shows how much we take these gadgets for granted
Amazing! Saved our old mop in 5mins. Thanks so much, boiling water bicarb and a pin was all it took!
Thank you, everything was clear but just not quite what the user expected. Happy to clean my own floor to test gain, having sourced a couple of extra cleaning pads online: great that these are washable and reusable 😊
Best advice fixed my steamer, two sessions of bicarbonate of soda not sufficient so needle treatment needed!!! All went well no steaming like a Welsh Dragon great advice many thanks👏👏👏👏👏
Going
Fantastic thank you very much for the feedback. Please like the video and subscribe to my channel. It really helps my channel to grow and the algorithm
Perfect - thank you! I was able to clean that ball thing and understand the machine better 😃
Amazing Im so pleased the video is helping. So many people have been commenting saying its helped. Please subscribe to my channel as it helps me grow. Thank you so much again for your feedback
Thank you, this was so helpful. I managed to unblock the weight and you've saved me going out to buy a new steamer!
Amazing Stacey I love hearing my videos are helping. There are so many items thrown out and replaced when in most cases its a simple fix. Would appreciate a share and subscribe when you get 5 minutes free. My channel is growing slow and steady which is great. Thanks for your support
Hello, just watched your video and have checked my cleaner as you have shown. My steamer is still not working. I press the trigger and nothing - lights are on, water heating up but not doing anything. Can you help?
Thank you. Very clear instructions. Solved the problem and saved the purchase of a new steamer!
Ah fantastic Glenys Kiff I love hearing that people are benefitting from my videos. I want to make so many more. Please subscribe to my channel and like the video it will really help me. Also If you have any suggestions of videos you would like me to make please tell me about them.
Thank you so much for the video!!!!
I did everything and also bought a new filter which still didn’t work until I found your video 😊😊😊
Thanks again !!!
Really pleased it worked. Sometimes it's a simple fix. I am trying to build my channel and upload useful videos as often as I can. Please like and subscribe to my channel when you get a spare 5 minutes If you haven't already. Thank you
Had a scream flow problem just seen your vid..... Well bolwed sir!!!!!! Cleaned the brass weight out....
Brian
Glad you liked the video Brian, If you haven't subscribed to my channel already please do. It really helps my channel growth and I am open to suggestions to improve my content or make a specific video on request. Thanks again
@@cleanmateltd737 will sub right now cheers
I have a little bit of steam coming through when using the pole handle and without. The steam button doesnt press in at all on the body of the steamer. I have cleaned the ball, holes etc. Both lights comes on and it gets hot but not working fully.
Did that and mine atill isnt producing steam , exact same model aswell
Same here, I thought it was mine had a problem due to been stod with water in. But borrowed a friends exactly the same. Friend used it very recently - same problem😢
@@kickilamerton I started pokin a spike into wher that little filter with the balls in and it started letting steam through, so I think it's something to do with that
How do you clean the filter?
Hi , I got a vax bare floor pro mop and a bag of attachments, there's a steam hose attachment but I don't see where th attach it
Hi Thomas, is it the clear flexible hose or is it a black hose with a wire coil all the way through?There were 2 models of bare floor but generally they only have a cleaning hose attachment If the centre of the machine detaches with its own independent handle. Please subscribe to my channel when you get 5 minutes it will be much appreciated
@@cleanmateltd737 hi ,no it's a grey coloured flexible hose with a attachment for cleaning sofa etc ,but I've decided it's not for this type of steamer I doubt
@@thomasmacartney7253 yes I've only ever seen a pipe attachment on the independent handle ones. Hope you get your sofa cleaned
Really good, I had a similar issue with mine a later model where it has two tanks one for water and one for detergent both been blocked by limescale build-up, drilled through it and as good as new. Thanks, you saved me from throwing it away and buying another one unnecessarily. You owe me apint
Really please to hear my video is helping a lot of people. If you have any subjects on cleaning you would like me to make a video on let me know.
@@cleanmateltd737; loo oo99 popó;
I just got one from market place, but the steam not coming
Same ,did you find out why ? 😢😢 I still have no clue .
Thanks buddy . Clear and concise a good use of time . I was able to fix my cleaner after your clip.
Thanks again from Perth Australia 👍🏼
Ah fantastic I'm glad to hear you were able to fix it. I have a lot of experience in cleaning and repairs etc so I'm starting to put my knowledge online to help others. Glad you liked the video. Please subscribe to help my channel grow. Take care
Hello, do you have any tips for fixing the trigger/handle? Mine is having a problem where the machine will not work if you press the handle trigger, but the multifunction removeable unit is working. The trigger seems to be depressing all the way (I took the handle apart), but for some reason not getting enough pressure to press down the button on the multifunction unit that it needs to depress. I was wondering about doing a vinegar clean? I also ordered new filters. I took apart the tank and cleaned it too and cleaned all the steam holes. Thank you for any help you can give. I live in the UAE so repair shops for this type of thing are a bit scarce here...
Hello and thanks for your comment. When you pull the trigger does it feel springy or is it loose with no resistance at all?
Yes steam easy to fix but how do you fix detergent delivery? The part is not available!!
Very helpful. Thank you so much.
@@philipbwardltd599 thanks for watching the video and I hope you will return to watch more at a later date as we are trying to upload more regularly. Please subscribe If you haven't done so already it really helps the channel to grow 😁😁
good vid i checked mine and less than half the steam the the one in this vid comes out in mine im not sure how to fix this
Thank you wished I’d looked on your site a lot earlier your tip was very helpful
Thank you very much for your support. Please subscribe to my channel and like the video If you haven't already. It really helps with the UA-cam Algorithm 😁
The weight has come off the plastic tubing, will this stop the production of steam?
Hya butty, I'm in Wales as well.
So in 22 I had my PS001 Pifco steam cleaner unblocked by a local shop.
Now it's showing the dreaded green light again!
I checked the lill ball, that's fine.
Also used a cleaning pin, an it doesnt appear to be blocked. What else could it be?
Still not working...
Thank you so much for this video. It fixed our Vax straight away. Really appreciate it 👍🏻
Amazing glad it helped. Can you subscribe to my channel If you haven't already please? It really helps support the growth. If you have any ideas for videos you would like to share please feel free to comment or DM. Thank you
Thanks for this! I didn’t even think to check this and the water and bi carb did the trick 👌🏼🤩
Fantastic, so glad I could help. Don't forget to subscribe 😉
Hey buddy, thanks for the video we have change the filter and clean everything as you mentioned and still no steam is coming .How can I fix this please help
Hi thanks for your comment. When the steamer is on can you hear the motor pumping?
@@cleanmateltd737 I have the same problem and I cannot hear the motor pumping, any ideas?
@@debbieparish1240 When you pull the trigger, is it lose or is there resistance?
@@cleanmateltd737 There is no resistance
@@debbieparish1240 There's a chance the trigger lever has become detached so the steamer may need dismantling.
Hi there, I’ve done that but the machine is still not steaming properly.
Thank you for this video but I feel that these videos need to address as many issues as possible as it’s not always going to be the one thing.
I do not know what else to check for and how to fix mine.
Hi thanks for your comment and for watching my video. Is the pump ticking?
@@cleanmateltd737 Thank you for your swift response. Everything sounds as normal, just not any steam coming out.
Hi there, hope you can help me too ,my steamer is only intermittently steaming ,and the water is leaking really fast ,I have cleaned the holes which you shown in your video which were clean really , my steamer is the exact same one you have got in your video. Thank you in advance, Vera
Thank you, that was brilliant and exactly the problem I had today
Got the weight back on, only a hum from the Vax, not producing steam.
going to give that a go now....thanks
Good Luck Sarah I hope it works and please subscribe to receive our latest videos. We are currently in the middle of filming cleaning advice videos and are hoping to build our channel up to deliver useful and quality packed videos.
First off, do you sell parts? If so, I think I need a new water pump. When I connect a pipe direct to the pump (from reservoir) water trickles out, but once I connect the filter and reservoir, (pump makes a noice) nothing comes out. Also, do you sell the three way pipe from pump outlet to heater?
Many thanks David.
Thanks a lot 👍 I just fixed mine
Amazing thank you for your comment. Please like and subscribe to my channel. It really helps me to grow my channel. Happy steaming 😀😀
Looks promising. I’m off to try it now 👍
Good Luck, let me know If it works and please subscribe to my channel
My combi won't stop heating. I have to turn the machine off to stop it.
It sounds like the pressure switch is jammed. Pull the head away from the machine (keeping attached) and push towards. Back and forth a few times. It should loosen up. If you haven't already please subscribe as it really helps my channel to grow. I appreciate your support
The head of the pressure button?
Thanks mate.
Thanks Geoff I hope you managed to fix your steamer from the video. Its one of the most common faults but goes undetected
Helpful but the music is far too loud. Difficult to hear you. Thank You for taking the time to do the video.
Thanks Mally really appreciate the feedback it really helps me to make better content. I'll find out what volume was used and lower it in future videos
Now steaming like a Welsh Dragon😂
Fantastic thank you very much for the feedback. Please like the video and subscribe to my channel. It really helps my channel to grow and the algorithm elbowcough
Unfortunately that was not the fault on mine, but thanks anyway.
Sorry the video didn't help on this occasion. Please subscribe to support my channel and I hope my future videos will help. Have a good day
Wish youtubers would all stop putting bloody loud music on all the way through their videos whilst explaining things, soooooooooo damn annoying, it's really not needed.
Super super video and well explained thanks buddy