Many thanks for not only being precise & concise but also as you stated at the start No yada yada yada talk wasting 3-4 minutes !! Lifes too short LOL! Subscribed & will recommend! If you have any more strip down vids on MX5 I'll be sure to watch. Thanks.
Thanks a bunch for an excellent video. I'm doing an engine swap and removing the dash was definitely the best way to wire it in. Although your estimation of 3-4 hours was very generous. I did it in an hour and 10 minutes after watching this video. Just watched it a second time for the re-install. I'll be doing a build thread and I'll link this video to it. I would love to see more videos from you. All the details without any fluff. Thanks again.
Thanks for the feedback, I truly appreciate it and glad you found this helpful. Due to the extreme circumstances of 2020, our Miata build has been put on hold for now. I hope to start up with videos again in the near future.
Just completed the video and dash removal. I watched it once, then removed dash along with video on second run. Took me about 1 hour. Highly recommend. I too have started a Spec Miata. More content if you have any to add. Thank you!
God bless you sir, watching this video saved me big time, I was all done and ready driving around, noticed my ac wasn’t working and I missed one harness that I forgot to plug in, had no clue where it went until I watched this video and skipped through it to find out where it went. 30:28 is the connector I couldn’t find, mine is black and his is white.
Thanks my man. Picked up an 02 with 213k miles with water in the interior from the top being open for months and needed to pull the dash to clean up and pull the carpet. Awesome video
Absolutely the most comprehensive instruction on how to remove the NB dash. I will be watching this on my laptop and follow step by step while doing this myself. Thanks a bunch! Please post other Miata instructions.
Great video: it was among two I used primarily to remove the dash in my NA for a heater box swap. Yours clarified several points common to NB/NA cars that were unclear in the other videos referenced. I left my seats installed as well as the steering wheel/airbag (though my car’s a driver vs. Spec car.)
Great Video... Thanks very much.. really helped be remove the dashboard on my NB Miata... I hope the reinstall is as easy as the removal... It took around 90 minutes to remove the dash... you saved me hours!!! 🙂... Thanks Again!
Thank you so much for this! I bought a 2001 NB recently and need to remove the dashboard because the previous owner screwed with the electronic in a bad way.
Excellent! This helps me with an issue I'm having accessing the dome light circuit, but also provides great insight on how this car is put together. Heading out to the garage as you advised!
Super helpful. I had to do this twice on a Suzuki Ignis (I don't think you have them in the US but hey!)...Amazingly the Miata dash is pretty much exactly the same except minor difference with the steering column. My heater matrix was bust...Good to have this in case (I REALLY hope not ) the matrix ever goes on the Miata. I found labelling all the bolts and taking photos as you go helped...Thanks...nice work...Intimidating job but take your time and it works fine 🙏👍
Thank you! Very helpful video. It is helping me a lot as I need access below the dash in order to remove an aftermarket alarm. I’d appreciate it if you’d make more videos!
Any tips on how to remove the HVAC control panel? I see holes where you can stick the welding wire but it doesn't to catch onnany mechanisms to release the HVAC control panel. I may resort to removing the dash to get at it...
The HVAC panel is different. There is a (rather large and strong) tab just inside the holes on both sides that need to be depressed towards the center of the HVAC to release it. It's a little bit of a doing to remove after removing the dash and flipping it upside down, but I suppose it could be done while still in the car. You'll need something stiff that has an "L" shape, like a cut-down Allen Key that would fit sideways in the holes. I don't think the welding wire will be stiff enough.
Thanks for the detailed video. Was able to remove everything and followed the video. Now I’m trying to reinstall the hand brake, but the white brake cable is too tight and won’t allow me to align the 3 holes for the bolts to reinstall. Anybody have this issue? My brake is disengaged and still an inch away. I pulled hard but it’s resisting just as hard !
Great video. 👍. I wanted to dynamat my interior and hardtop roof. Your video kinda shows it’s really not worth removing the dash as there isn’t much area to apply sound deadening, right?
Mate I'm no gonna lie like what one is it a 12 or a 13mm? It wouldn't be much use if I made videos saying you should maybe do this, wouldn't make much sense. Bar that, cheers for the help.
WELL SO FAR, there was little waste of time until I got to 9:33 till 11:50 and that was a lot of hooplah lol "remove stereo, u need the removal tool or make your own" would suffice...
Many thanks for not only being precise & concise but also as you stated at the start No yada yada yada talk wasting 3-4 minutes !!
Lifes too short LOL! Subscribed & will recommend! If you have any more strip down vids on MX5 I'll be sure to watch.
Thanks.
Thanks a bunch for an excellent video. I'm doing an engine swap and removing the dash was definitely the best way to wire it in. Although your estimation of 3-4 hours was very generous. I did it in an hour and 10 minutes after watching this video. Just watched it a second time for the re-install.
I'll be doing a build thread and I'll link this video to it.
I would love to see more videos from you. All the details without any fluff. Thanks again.
Thanks for the feedback, I truly appreciate it and glad you found this helpful. Due to the extreme circumstances of 2020, our Miata build has been put on hold for now. I hope to start up with videos again in the near future.
Hey man, I'd love to see your build thread (or at least what you have put together so far)! Do you mind sharing it?
Just completed the video and dash removal. I watched it once, then removed dash along with video on second run. Took me about 1 hour. Highly recommend. I too have started a Spec Miata. More content if you have any to add. Thank you!
God bless you sir, watching this video saved me big time, I was all done and ready driving around, noticed my ac wasn’t working and I missed one harness that I forgot to plug in, had no clue where it went until I watched this video and skipped through it to find out where it went. 30:28 is the connector I couldn’t find, mine is black and his is white.
Thank you for taking the time and making a detailed, instructional video. Spending a few min watching this saved me a ton of time and frustration.
Thanks my man. Picked up an 02 with 213k miles with water in the interior from the top being open for months and needed to pull the dash to clean up and pull the carpet. Awesome video
The only video out there that has clear and detail instruction on how to remove the dash. Thanks homie 👊🏽
Absolutely the most comprehensive instruction on how to remove the NB dash. I will be watching this on my laptop and follow step by step while doing this myself. Thanks a bunch! Please post other Miata instructions.
Thank you for creating this video. It helped me figure out what I was missing while trying to remove the dash in my 01 SE.
Had the dash out for a project, thanks for the expansive video, helped me put everything back together.
Great video: it was among two I used primarily to remove the dash in my NA for a heater box swap. Yours clarified several points common to NB/NA cars that were unclear in the other videos referenced. I left my seats installed as well as the steering wheel/airbag (though my car’s a driver vs. Spec car.)
Best Miata dash removal video on UA-cam hands down. I tip my hat to you, sir keep making videos!
Great Video... Thanks very much.. really helped be remove the dashboard on my NB Miata... I hope the reinstall is as easy as the removal... It took around 90 minutes to remove the dash... you saved me hours!!! 🙂... Thanks Again!
You da man!!! love that you keep it sweet simple and direct! great guide!
Great ! thanks so much for the energy you´ve put in this.
Thank you so much for this!
I bought a 2001 NB recently and need to remove the dashboard because the previous owner screwed with the electronic in a bad way.
Excellent! This helps me with an issue I'm having accessing the dome light circuit, but also provides great insight on how this car is put together. Heading out to the garage as you advised!
Going on 4 years and still reference this video when I go to pull a dash!
Best NB dashboard removal video on YT
I too must change out my air bag control module. This video is more useful than the shop manual.
Super helpful. I had to do this twice on a Suzuki Ignis (I don't think you have them in the US but hey!)...Amazingly the Miata dash is pretty much exactly the same except minor difference with the steering column. My heater matrix was bust...Good to have this in case (I REALLY hope not ) the matrix ever goes on the Miata. I found labelling all the bolts and taking photos as you go helped...Thanks...nice work...Intimidating job but take your time and it works fine 🙏👍
This is terrific. Loved the detail you covered. Thank you!
Amazing. Extremely helpful and a great example of how an instructional video should be done!
Thank you for the video! Currently doing a wire tuck so this was very helpful
Great commentary and good video angles makes this an excellent step by step guide. Many thanks.👍🏽😎
This video helped us out a ton! Thanks for covering every step of the process.
Thanks! We're very happy to hear that it helped you out!
Very helpful. Talked me through the job in great detail. Step by step. Thank you
Fantastic, comprehensive, and definitely worth the watch. Thanks!
Thank you! Very helpful video. It is helping me a lot as I need access below the dash in order to remove an aftermarket alarm. I’d appreciate it if you’d make more videos!
Thank you for the wonderful feedback! We're hoping to get back to the Miata project soon...so stay tuned!
detailed, step by step. Made taking mine out a breeze. thank you
Very comprehensive video thanks a ton!
Ironically, talking about not including idle chit-chat is idle chit chat in itself
excellent video ! I need to replace my air bag module and this is really
Thank you for this very helpful video. 👌
Thanks you for the video
It is very good explaining 😁
Excellent overview thanks for providing
Great video. Thank you very much !
Well done. Very nicely explained.
Buen video. Una pregunta. Como puedo quitar el embellecedor donde van los mandos del aire acondicionado y calefaccion?. Te lo agradeceria mucho
I'm Building a spec miata wish you had some more content.
Any tips on how to remove the HVAC control panel? I see holes where you can stick the welding wire but it doesn't to catch onnany mechanisms to release the HVAC control panel. I may resort to removing the dash to get at it...
The HVAC panel is different. There is a (rather large and strong) tab just inside the holes on both sides that need to be depressed towards the center of the HVAC to release it. It's a little bit of a doing to remove after removing the dash and flipping it upside down, but I suppose it could be done while still in the car. You'll need something stiff that has an "L" shape, like a cut-down Allen Key that would fit sideways in the holes. I don't think the welding wire will be stiff enough.
Thanks for the detailed video. Was able to remove everything and followed the video.
Now I’m trying to reinstall the hand brake, but the white brake cable is too tight and won’t allow me to align the 3 holes for the bolts to reinstall. Anybody have this issue? My brake is disengaged and still an inch away. I pulled hard but it’s resisting just as hard !
At 30:57 what connector are you removing? Where is the receiving end in the car?
Great video. 👍. I wanted to dynamat my interior and hardtop roof. Your video kinda shows it’s really not worth removing the dash as there isn’t much area to apply sound deadening, right?
Your Video is very helpfull and entertaining too!
Can you change the bulb for the airbag light and stuff?
Great work.Maybe better than Mazda's technical video.
Ive been wanting to remove the dimmer switch, does anyone know a way without removing the dash?
thank you
Hey I was just wondering but are you still active? Is there a way I could message you?
Why would people want to remove the dash?
it's 12mm. Mazda uses mostly 10mm 12mm 14mm 17mm 19mm and 22mm
It’s not called a miata it’s called a Mazda mx5 it’s Japanese not American
If your not in a Japan and not a stickler about names it's called a miata
I have a extra clip
Sell me that radio and heater control.
Mate I'm no gonna lie like what one is it a 12 or a 13mm? It wouldn't be much use if I made videos saying you should maybe do this, wouldn't make much sense. Bar that, cheers for the help.
WELL SO FAR, there was little waste of time until I got to 9:33 till 11:50 and that was a lot of hooplah lol "remove stereo, u need the removal tool or make your own" would suffice...
Disagree, I found the description and visual helpful