How to test, remove and replace a fuel injector for a Yanmar type single cylinder diesel motor / generator such as the Aurora Diesel Generators from EmergencyPower.com
Very helpfull and intuative video and great quality too. One thing though, please, please don't use those nasty "grip things" like at 0:04, get some propper spanner and not only will you find working on it easier but you won't round off all the nuts and bolts. Otherwise, great video and thanks for sharing it with us.
Spanners are better than toothed pliers for nuts. Marked nuts do not look so nice and resale value drops fast. If he undid the nut on the pump and the nit on the injector, there would be no need to bend high pressure pipes.
Important safety tip. DO NOT put your hand over the injector while you're firing it. It WILL shoot fuel through your skin, and you do not want that. That is a horribly painful and disasterous condition.
Yea holly crap I was furious to see they are teaching people to check without talking about safety. He already removed the high pressure line could have easily relocated it inside a bucket or something by removing the return line. That's what I did on mine.
If I saw someone using multi grips on the injection line nuts instead of a 17mm spanner, or at least a shifting spanner, I’d give them a back-hander in the mouth and tell them to go buy some tools and learn how to use them.
I cringe just using a shifter on some parts of my diesels. Couldn't imagine using that thing. Better grips (self gripping things that were advertised on TV) I could just tolerate maybe 😂
Thank You for the public service of making this video. I've subscribed. However, I have to say, I'm cringing every time I see you use those channel locks.
Thank you for this super simple lesson. It is made to a deisel Ignoramoose can figure it out.... I am a deisel ignoramoose.... I can't even spell deisel right....
Dear i have one question for you.....i have seen people modify a bottel jack for testing a desel fuel injector. Can we use this generator desel fuel pump to test the pop pressure of any desiel injector ?
Hi I have a generator with a very similar engine to this one trouble I'm having is it is piping out of the intake when trying to start if you have any ideas what it could be thanks
Dear youtube, i have a similar engine (winsun type 192) as new but does not give proper output; Injection timing is okay, pump arm moves all the way to the right, but no smoke and bad cold start. I cannot find anything what causes the defect. Anyone an idea?
Buenas tardes patrón una preguntita inyectores para esos motores generadores de diesel dónde los puedo conseguir si es tan amable de decirme lo que pasa que tengo malo el inyector y no este no lo puedo conseguir la verdad yo soy de aquí de Tejupilco Estado de México
Mas sy pendatang baru nih masih kurang paham kenapa kalu di setarter kok ngg bunyi kaya yg di vido ini melain kan grutuk deg gitu ms apa peyebabny makasih sebelum ganti oli di star ok setelah gati kok susah setar sy pake oli B40 apah salah oli mohon suhuu keteranganya
Mine is running for about 5 sec then cutting off , I have bled top and bottom and have good oil ? Could it be my injector , less then an hour of run time it's new . I have been running once a month for 15 minutes, puzzled?
The very first thing we see is you putting channel locks on a plated bolt. Come on, Grade 7 shop students know better than that. Look at what it's doing to the bolts, they're already all chewed up. Awful; a how-NOT-to video.
What the hell kind of mickey mouse mechanic are you? Never, ever bend the high pressure fuel pipe, ever. You will weaken it and it could split at a later time. Don't be so lazy - undo both ends of the pipe and remove it. And get some proper tools for god sake, even for the sake of the video. Using pliers and locking pliers damages the fittings and is pure laziness. I sure hope you never get near any of my engines! Amatuer.
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
Very helpfull and intuative video and great quality too.
One thing though, please, please don't use those nasty "grip things" like at 0:04, get some propper spanner and not only will you find working on it easier but you won't round off all the nuts and bolts.
Otherwise, great video and thanks for sharing it with us.
❤❤❤
Never mind repeated the process of bleeding again and she is running now , thanks for the help!
Spanners are better than toothed pliers for nuts. Marked nuts do not look so nice and resale value drops fast.
If he undid the nut on the pump and the nit on the injector, there would be no need to bend high pressure pipes.
1. Use the proper tools for the job
2. Do not bend your fuel lines
3.They are nozzels not injectors
It's painful to watch
the whole unit is called an injector, the tip is the nozzle
Injector is the common term 🤷♂️
U nailed it buddy
Important safety tip. DO NOT put your hand over the injector while you're firing it. It WILL shoot fuel through your skin, and you do not want that. That is a horribly painful and disasterous condition.
Yea holly crap I was furious to see they are teaching people to check without talking about safety. He already removed the high pressure line could have easily relocated it inside a bucket or something by removing the return line. That's what I did on mine.
Thank you for the useful explanation through which I was able to repair my generator
If I saw someone using multi grips on the injection line nuts instead of a 17mm spanner, or at least a shifting spanner, I’d give them a back-hander in the mouth and tell them to go buy some tools and learn how to use them.
I cringe just using a shifter on some parts of my diesels. Couldn't imagine using that thing. Better grips (self gripping things that were advertised on TV) I could just tolerate maybe 😂
❤❤❤
Thank You for the public service of making this video. I've subscribed. However, I have to say, I'm cringing every time I see you use those channel locks.
ارجوا تخصيص فيديو شرح يوضح فك وتركيب بابور او مولد الهربائ gam dog 11105 DB 18 حصان بارك الله فيك
ha ha, I love the way you just pulled that out by hand. My M57 BMW engine will not let the injector go quite that easily I fear!
Buen video amigo.. muchas gracias por compartir tu conocimiento, me sirvio de mucha ayuda. mil gracias..
Pliers? REALLY???
With all the hammers and chisels in the world and you use a pair of channel locks on a fuel nut ? hahahaha
Wow Thanks your helpful video information 186FA p80 fuel injector the pest jenerator Japan technology
thnks alot its very usful
Don't bend the injection line as it may not fit correctly if done repeatedly. It might get metal fatigue and need replaced over time.
Great work❤
Hello from iraq well done
分かりやすい！
Great vid. Thanks 👍 I have the same generator. It's Pacini but identical.
Would you know where I would get a air filter for it?
Porque se pega el descompresor del motor diésel cuando lo traen en el levas gracias
تحية من العراق
Buen video, como se purga el inyector, porque si le damos a prender asi tiene aire en la tuberia y no va a prender nunca
Good job 👌👍😊
What happens if the comparations can't take place in generator engine?
Sir, do you have a video on how to fix the fuel injector?
Thank you for this super simple lesson. It is made to a deisel Ignoramoose can figure it out.... I am a deisel ignoramoose.... I can't even spell deisel right....
please use the correct tools...open end wrench not a channel locks
Or at least use the waterpump pliers *correctly* this video is filled with poor technique!
Dear i have one question for you.....i have seen people modify a bottel jack for testing a desel fuel injector. Can we use this generator desel fuel pump to test the pop pressure of any desiel injector ?
how can I find out the diesel generator drops light
THANK YOU
in all fuel pump videos no one says anything about fuel pump pressure what or how much should it be ? How much valium or flow should I be getting ?
Hi I have a generator with a very similar engine to this one trouble I'm having is it is piping out of the intake when trying to start if you have any ideas what it could be thanks
Dear youtube, i have a similar engine (winsun type 192) as new but does not give proper output; Injection timing is okay, pump arm moves all the way to the right, but no smoke and bad cold start. I cannot find anything what causes the defect. Anyone an idea?
How do you remove the valve stem seals? TIA
rough as barbed wire. Don't you own any spanners?
I've got a multi power industrial equipment diesel power,how can you tell if the injector pump and injector are bad
Como sabes que motor esta fundido
Have you ever seen anyone use brake lines as a fuel injector line?
Is it possible to convert these to run a go kart I have a Keyed crank and the fuel supply adapter
how to najile cleaning?
Buenas tardes patrón una preguntita inyectores para esos motores generadores de diesel dónde los puedo conseguir si es tan amable de decirme lo que pasa que tengo malo el inyector y no este no lo puedo conseguir la verdad yo soy de aquí de Tejupilco Estado de México
شرحك ممتاز بس لو ترفع صوتك أقوى
Does diesel pump need to adjust timing while installing
Mesin seperti itu apa ada lobang ventilaornya?
❤❤❤❤❤
Do you have a video on checking and adjusting the valves on these yanmar clones?
ممتاز
How to clean the injector/nozel?
Mas sy pendatang baru nih masih kurang paham kenapa kalu di setarter kok ngg bunyi kaya yg di vido ini melain kan grutuk deg gitu ms apa peyebabny makasih sebelum ganti oli di star ok setelah gati kok susah setar sy pake oli B40 apah salah oli mohon suhuu keteranganya
What the problem not passing disil in nosil pipe
Hi, do you know why the engine is sometimes running slow and rising up normal again? Thank you.
Cómo se desarma la bomba de agua de un motor 18 HP kholer diesel
Mine is running for about 5 sec then cutting off , I have bled top and bottom and have good oil ? Could it be my injector , less then an hour of run time it's new . I have been running once a month for 15 minutes, puzzled?
Low oil
Sr buenps dias tengo un hrupo electrogeno kopor necesito el omjector y el filtto de airr es modelo 6700 o 5000
The very first thing we see is you putting channel locks on a plated bolt. Come on, Grade 7 shop students know better than that. Look at what it's doing to the bolts, they're already all chewed up.
Awful; a how-NOT-to video.
وش سبب كثافة الدخان بعض الاحيان
إنه ليس على محركات الديزل الحديثة. يجب ألا يدخن الديزل على الإطلاق.
hello sir,..
i have a problem with my diesel generator, it blows black smoke.... how to fix it... tnx
Add a small quantity of petrol or automatic transmission fluid to your diesel tank now and again, helps clean the injector without removing!
Watching those pliers go on a nut was painful at least use a cresent wrench
Por que se recalienta y funde los casquete es un motor de 13 caballos
My launtop diesel generator would not start an i really need some help.when u try to start it some white smoke coming out of the air breeder
Yes
Hey my engine is not turning over what you think is the problem. I tried to turn the engine with a wrench and no movement.
om mau tanya tmpat bli selang saluran solar it di mana om🙏
@Bruno Figueiredo Keep your hands etc away from the spray, and don't test injectors when the engine is hot.
Leave it to your mechanic boss
Hi what brand of generator is this. I have one that looks the same but it's red and I can't find the brand name
Brand name? It’s a Chinese, generic cloned, multipurpose, Diesel engine. It doesn’t have a particular brand name per say. It can be anything.
Why a choke like structure on the head ?
lever opens the exhaust valve for compression release.
how to nojel cleaning
use abbro injector cleaning agent put in to fuel tank dozzege is 50 cc per 4.5 ltrs-
2:15 what is the rubber line for, mine is disconnected and I don't know where it goes
It's feed back diesel line to the main tank.
Witch problem blue smoke
أسباب تهرب الزيت من الرس
Engine repair manual books up Ka push ha price
i can't believe your doing this....please use proper techniques....
find a wrench
Avr generator yanmar diesel
Who needs wrenches when you have angle pliers?
Hallo my friend...i need remove injector for kipor generator but not out he is defernt for you. Can you help my...send my you what's up
Bord Electronic Sestem
Seriously? Slip joint pliers on the B nuts? Have a look at the damage you are doing.
U don't have 17 mm spanner
يا ريت الترجمه العربيه
That I presume is a yanmar clone
Si Buenas tardes Sí le Mi nombre es Armando no sé si
wow pliers ...... doh !
Cuma begitu aja tau. Km kerjamnya lama
What the hell kind of mickey mouse mechanic are you? Never, ever bend the high pressure fuel pipe, ever. You will weaken it and it could split at a later time. Don't be so lazy - undo both ends of the pipe and remove it.
And get some proper tools for god sake, even for the sake of the video. Using pliers and locking pliers damages the fittings and is pure laziness.
I sure hope you never get near any of my engines! Amatuer.
It hurts me to watch you use pliers on the fittings!
use proper tools first -
Your not a mechanic for sure plier is not a correct tool for tightening lock adaptor esp on fuel lines
Poor sound quality
Bent the line wow I hope you don't present yourself as a professional.
The most amateurish video on the subject I've ever seen! What garbage!
Is that a Chinese clone of a Yanmar Diesel engine
Porque se pega el descompresor del motor diésel cuando lo traen en el levas gracias