What grade metal are the using ? Alright I'll tell you !! I have created a system for an inter cooler that uses refrigeration technology by using an electric motor driven air condition compressor to pump cold air into the inter cooler intake. You can adjust the temp of the out going charge to what ever you want. I choose 65 degrees for the intake of the induction charge into the engine. The compressor can also be mounted on the engine too but using a 12 volt e-motor to run compressor allows placement of the two any where in the vehicle.
Evan reminds me of Chris Pratt in Parks and Recreation. I would totally watch a show with his character, played by Evan, in a shop environment. You could call it Sparks and Recreation for the beautiful welding.
Mr.Ryan..way to take build to the next level. Dont be surprised if I don't put my order in for my project s10 blazer. I am in need for geometry specs for my long travel 4x4 looking to get 15 inches of travel off a stock frame. Any ideas on where I should go from here. I have thought of converting it to Silverado baha design .what do you think
1:00 that red impact on the table is $500 from Snap-On.... thats why I call em Strap-On. Buy their products and it'll feel like you were hit raw with a Strap-On.
I love videos like this, especially because it shows something nice that I can watch with my 3 year old.. however, please look up some videos on lathe safety (JoePpieczynski has a couple) and especially when/what to do with sanding paper... please don't ever use it like you do on 1:24 again if you want to keep all your fingers working with lathes.. ask me how I know how fast you can loose them..
God bless Ryan and his team. I am so grateful you create exceptional off road technology! See you for my project place in line someday.
You guys are like effin mechanical magicians! So damn cool!!!!
Love what u guys show us!! We don’t have this in Oregon. Just the dam rain
Best stuff on the tube
Beautiful meaningful work done
My OCD for the day is now calm. Well done guys!
The machine shop is awesome!!!!!
Love all the in depth details on the builds and the terminology. Keep these coming! Great work as always.
awesome! I love seeing the CAD side of things.
Excellent video!
very nice work
I'm so glad this channel is growing quickly. You guys are the only ones doing these types of videos to this high of level.
Great tech! Thanks!
So Sick
really creative design .amazing project love to do the same ...look forward to your next post
Nice work . I miss seeing you around oceano
Purdy Fancy
Love your work Kibbe
Evan is the real brains behind the operations there!
great video and fun to watch you guys.
This channels amazing its gonna explode to 100k in no time!
You guys build some cool stuff, very nice!!
Rad Stuff Guys!
Evan is the best👍
Great job!
killing it !
What grade metal are the using ? Alright I'll tell you !! I have created a system for an inter cooler that uses refrigeration technology by using an electric motor driven air condition compressor to pump cold air into the inter cooler intake. You can adjust the temp of the out going charge to what ever you want. I choose 65 degrees for the intake of the induction charge into the engine. The compressor can also be mounted on the engine too but using a 12 volt e-motor to run compressor allows placement of the two any where in the vehicle.
Next level stuff kibby, Matt kinda takes from the energy of your video though.. I’m sure he does awesome work but he’s dryer than toast.
HAHA! Matt is very to the point in his explanations
I use to work with Matt at Caltracs he’s a really good dude. I was very much taken back when I randomly seen him on this video.
Dude Matt's engineering is taking this company to the next level! You want a flamboyant bag of shit or straight to the point desert missel ?
I love the work you guys do !!!!! I got a cab for you ;) !!!
On the keyed ends do you have location pins cut out of the tubes, if so can we see them up close ?
Evan reminds me of Chris Pratt in Parks and Recreation. I would totally watch a show with his character, played by Evan, in a shop environment. You could call it Sparks and Recreation for the beautiful welding.
Next level sh~t! After the apocalypse the mutants will have some sano mosheens to ride during the fight for "guzzoline"..... Mad Max style!
Kibb3-Crew Tech Skool-
increible man ya estas en otro nivel. congrats nice jobs👌
Mr.Ryan..way to take build to the next level. Dont be surprised if I don't put my order in for my project s10 blazer. I am in need for geometry specs for my long travel 4x4 looking to get 15 inches of travel off a stock frame. Any ideas on where I should go from here. I have thought of converting it to Silverado baha design .what do you think
would almost think that spindle would be to make an 8 lug front for banks
Great CAD work 👍
1:00 that red impact on the table is $500 from Snap-On.... thats why I call em Strap-On. Buy their products and it'll feel like you were hit raw with a Strap-On.
Are you using just autoCAD or something like?
What genius told folks that a 90s guitar noise music over was a good idea for u tube video. Great video minus all the racket
Gnar Gnar
is the software solidworks?
I love videos like this, especially because it shows something nice that I can watch with my 3 year old.. however, please look up some videos on lathe safety (JoePpieczynski has a couple) and especially when/what to do with sanding paper... please don't ever use it like you do on 1:24 again if you want to keep all your fingers working with lathes.. ask me how I know how fast you can loose them..
Rad 😎⚡️🤙
anybody know what tape that is at 16:08
ชิ้นงานและผลงานคุณดีมาก
🤙
Change your machines coolant
I think we got it under control
Evan is not a "yes man". More men should be like Evan
Sanding tubes like that on a lathe is actually pretty smart lol.
🎰🇺🇸Badass
That music is killing the video.
Ok
No
It'd be more injoyable if the music and tool sounds were more balanced with the talking.