Build an Indestructible PVC Umbrella (DA UBER BRELLA)
Вставка
- Опубліковано 25 сер 2024
- ORIGINAL POST:
I've gone through many umbrellas over the years. So much so that I think of umbrellas as a consumable. This project attempts to put to rest the consumable label I've given umbrellas. Today, I'm going to build what I would consider the indestructible umbrella, or Da Uber-brella.
PARTS LIST:
● 2ft - 1" PVC pipe
● 1x - 1" PVC coupler
● 2x - 1" PVC cap
● 1x - 1-1/4" PVC coupler (expansion piece)
● 3x - 10' length of CPVC (from these 10' lengths, cut the following pieces)
- 8x - 1/2" x 22" CPVC
- 8x - 1/2" x 10" CPVC
● 16x - 1/2" CPVC caps
● 2x - 2' length wooden dowel - largest diameter that can slide into CPVC
● Box of 100 #208 eyelet screws (to be used as the hinge system)
● 8x - 1/4" dia. x 1/2" long hex-head bolt
● 4ft x 4ft sheet of tarp
● 3' - 1/2" rope (doesn't need to be exactly 1/2")
Solar array footage is a clip from "Brigham Young University - Origami in Space"
🔗 • Origami in Space: BYU-...
Intro music track provided by the Frequency channel on UA-cam.
Download link to all music is in each song's description.
🎼 Track: Emeth Paul - Turn Up
🔗 • Emeth Paul - Turn Up
Outro music track provided by the Frequency channel on UA-cam.
Download link to all music is in each song's description.
🎼 Track: 2Bad - Space Cake
🔗 • 2BAD - Space Cake
Out of all the umbrella DIYs, this was the one detailed and understandable. Thank you.
I'm so glad!
And I'm watching today, 3 years later and so happy!! Thank you! @@XLessThanZ
I am hating the fact that I have thrown away so many outdoor umbrellas, because of a broken arm. I could have saved so much money. Thanks for a very thoroughly explained video. Please do an update.
People have mentioned that and I think I'll look into a new idea...Thanks🤙🏽
You did a great job. Thank you for posting.
True genius
This is the amazing diy umbrella i found. Great video bro! Thanks
No follow up? GREAT VID!!!
Thanks, great project.
nice project
Don’t need a 1” coupler & removal of the inside stop, just use a 1-1/4 pvc.
Thanks for this video. I have an idea now
It's a nice idea, and surprising to find very few YT vids about this subject. Some other ideas would be like a 'frankenbrella' using parts from a commercially made patio version, or did you ever see those ones for made for fishing? The ribs/fabric could be shortened and the pole changed, leaving a sturdier hand-sized version.
There are YT vids showing 3D printed DIY metal forming dies; stronger hardware for a normal umbrella could be made like this using steel strips. Perhaps on a standard umbrella the weak parts could be reinforced using resin and ultra-light glass cloth (designed for RC planes), or braided tube, and compression molded in some way. The hinge rivets drilled out and upgraded hmm.
On going to make one myself. I broke two today in a wind and rain storm, I was soaked by the time I got to the car.
You're going to loose a finger using the tablesaw like that.
i also want to make a strong umbrella thank you
I imagine you could use bamboo or cane in place of the PVC.
Please use a vice to hold your ole instead of your hand when drilling anything.
Pole
Bravooo💗👍
Why would you stop just before you finished the umbrella?
Wanted to do something different from the typical canopy, but yep, should've at least finished it.
@@XLessThanZ yours was the best video i found.
@@AUS5113 appreciate it
👍👍👍
Excuse me, since you didn’t use a push stick on your table saw, I assume you don’t wear any eye protection, either! Thanks 4 the brainstorming, which includes what not to do.