How to Replace Inlet and Outlet Bypass Hoses 2008-2017 Buick Enclave
Вставка
- Опубліковано 21 жов 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/198/j...
This video shows you how to install inlet and outlet bypass hoses on your 2008-2017 Buick Enclave. These hoses facilitate the movement of coolant throughout your engine, and can wear or break over time.
This process should be similar on the following vehicles:
2008 Buick Enclave
2009 Buick Enclave
2010 Buick Enclave
2011 Buick Enclave
2012 Buick Enclave
2013 Buick Enclave
2014 Buick Enclave
2015 Buick Enclave
2016 Buick Enclave
2017 Buick Enclave
Tools you will need:
• 8mm Socket 1aau.to/oa/1AXA...
• Trim Tool Set 1aau.to/oa/1AXX...
• Hose Clamp Pliers 1aau.to/oa/1AXA...
• Hose Pliers
• T25 Socket 1aau.to/oa/1AXA...
• Ratchet 1aau.to/oa/1AXA...
• Socket Extensions 1aau.to/oa/1AXA...
• Drain Pan 1aau.to/oa/1AXA...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
You lucky ba***rd!... everything goes smoothly well for you😅 never struggling for anything like us out here in the real world
Just had that done. $1200 job. Your video was just 12 minutes long so that means I paid someone $100 a minute to do it.
Thank you for make this repar. You help me a lot.
I like the way he just loosens the quick connects by hand. In my case no way, no how. Save yourself the headache, buy the $10 tool first
My daughter and husband just had their 2012 Buick Enclave repaired for overheating and they replaced both hoses ($190 each). Seems high. Then the part that stumped me is they also charged her for an MS97240 - Intake Manifold Set (another $100). I didnt see you remove the intake at all. Did they need to or they just did to bump her bill up?? Please answer as I may challenge the company since I paid for the job before I got her receipt. Thank you
My Enclave does not have this much room in the back. Thanks for the video.
How can you tell if the top or bottom hose at the firewall is the inlet hose?
I have a question aboud the hoses ,are the same or are they diferent batton and uper .thanks for you video it helpme alot off
they are different hoses, one is the inlet and the other is the outlet
@@sofisaactube4828 which one is inlet and which is outlet???
at about 9:33 your putting back a hose should this always be connected? For some reason on our 2012 GMC Acadia it is not. Should I connect it? Thank You
Do you by achance have a link to the parts you used?
2013 Valero
I replaced both those hoses toped of my coolant and started the car let it run for 10 min and it overheated again nothing is leaking any more i hear fan blowing and coolant is gurguling in the reservoir 2011 acadia
+call me pops We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it.