@@MrCeez1 I've never tried spraying metal flake that's the same colors of paint, only sprayed silver metal flake and candied over it. I'm going to have to try your process one of these days soon on something. Did you spray the metal flake inside clear coat or intercoat clear? Thanks buddy
Pretty incredible sparkle. Less metal flake no doubt would make for a more subdued sparkle. How little can you add to get a subtle sparkle yet maintain consistency so it isnt splotchy?
Just found my golf cart project color... Did you clear on top of this? or does this essentially act as a single-stage paint? Sorry for the silly question, I'm just a DIY weekend dreamer haha
I haven't tried black candy. However I seen videos black candy over red. I'm sure black candy over the green flake would hide the sparkle but the sun or a bright light source would bring out the flake.
I used 2 k clear for this video. As for logos, I use base coat paint for logos, art work and design. I haven't used stickers then clear over that. I recommend putting your base coat paint then clear, wait till next day scuff and then add your logos, then clear again. This way if there is an error on your logo or design you can wipe off. I hope this helps
after the intercoat with the kandy and flake mix that u sprayed did u go over with the second cup of kandy u mixed without the flake then clear coat ? was wondering if u used the 2nd cup off camera then clear
I used the one cup mixed, it was enough for the sportster motorcycle tank only. However the second cup was there incase I needed it. I could have sprayed the green candy mix without the flake for a more deeper green candy look. The second cup I used on another project.
It sure is nice to spray @ 10 psi limited waste / over spray especially. when it comes to any House of kolor products. Pricey and wurth every dollhair .
@@Jason_Family_Man yes you do for these reasons, depending on the size of flakes you are going to spray. 1. Mini flakes 1.2-1.3 fluid nozzle 2. Standard 1.3-1.4 fluid nozzle 3. Large 1.5 fluid nozzle Some painters have a separate spray gun just for flakes to not contaminate non metallic paints. It doesn't need to be a high end spray gun just a quality spray gun.
Well that eliminated a step rather than having to lay the flake, clear over that, and then candie over it afterwards. I was wondering about doing this to cut steps down but wasn't sure it was possible, now I know!!
El material utilizado es de house of kolor. Usé pintura negra base, pintura transparente verde caramelo y agregué escamas verdes a la mezcla de pintura transparente.
آپ آن لائن پڑھ سکتے ہیں۔ کینڈی پینٹ آٹو پینٹ کو مکس کرنے کا طریقہ ٹائپ کریں۔ ہاؤس آف کلر ویب سائٹ تلاش کریں۔ مجھے نہیں معلوم کہ آپ ویب سائٹ پر جا سکتے ہیں یا نہیں لیکن ان کے پاس ویڈیوز بنانے کا طریقہ ہے۔
That was not a 2-1 ratio. You used the wrong “5” in your first measurement. You ended up mixing it backwards, like 1-2 ratio. Way to much reducer, but it worked out.
@@MrCeez1 Yeah definitely, I worked in a big collision center for 15 years. I was a technician though. Hung sheet metal, took cars apart, put them together. I did suspension work alignments, A/C, all that stuff. I was a problem solver as well. But I've seen some really nice HOK jobs come out of our booth...👍🏻
That some beautiful stuff right there.Great work brother.
Thank You Sir, Much appreciated
That green really pops!
Thanks Barry
Wow thats a beautiful color
Thanks Punkin's
Awesome color and sparkle! When it was in the Sunshine it looked sooooooooo awesome!
Thanks Bro Anyone can learn to do the same.
We do this on my truck
Damn look at that so beautiful I absolutely love that colour with the flake 👌 nice one dude 👍
Thank you Sasfoot.
Beautiful love the flake
Thanks them flakes are cool.
@@MrCeez1 I've never tried spraying metal flake that's the same colors of paint, only sprayed silver metal flake and candied over it. I'm going to have to try your process one of these days soon on something. Did you spray the metal flake inside clear coat or intercoat clear? Thanks buddy
@@leonardtribble2475 I only added flake to the intercoat. It's just a different way and different look to the project
@MrCeez1 sweet...thanks for the detailed info buddy...
Incredibly extraordinary colors
I'm from Indonesia
Yes it is a nice color. Thank you
Very nice.
Thanks Nigel 900
very good. I'm from Brazil
Ronaldo thank you
I was searching this colour, but don't know the exact name.now I got it....❤🤜👍
Cool Glad to hear my Friend
Dude, that's A KING KONG TABLESPOON 😅
Pretty incredible sparkle. Less metal flake no doubt would make for a more subdued sparkle. How little can you add to get a subtle sparkle yet maintain consistency so it isnt splotchy?
If I were to paint the fuel tank again for a subdued sparkle I would mix half and spray 1 or 2 coats of flake paint mix and go from there
I now know the shade of green I want to use for when I get a Challenger as my first car
Yes very nice color and good luck with your first car. My first car was a 1966 Impala. I'll be painting it soon. White metallic
@@MrCeez1 Oooo that'll look amazing
Очень круто получилось👍👍👍
спасибо надеюсь вам понравилось видео.
@@MrCeez1 Да, отличное видео!
Just found my golf cart project color... Did you clear on top of this? or does this essentially act as a single-stage paint? Sorry for the silly question, I'm just a DIY weekend dreamer haha
It had 2 coats of clear. your good Sir. I was just watching UA-cam videos
i remember seeing this sparkle on most cars in 1980s
I had a blast in the 80's.
would you put a black candy over the top to mute the shine?
I haven't tried black candy. However I seen videos black candy over red. I'm sure black candy over the green flake would hide the sparkle but the sun or a bright light source would bring out the flake.
Can you add logos then clear coat over again. Also is the clear coat 2k .Thanks that’s a brilliant colour
I used 2 k clear for this video. As for logos, I use base coat paint for logos, art work and design. I haven't used stickers then clear over that.
I recommend putting your base coat paint then clear, wait till next day scuff and then add your logos, then clear again.
This way if there is an error on your logo or design you can wipe off.
I hope this helps
Woooooooooowwwwww
Good
thank you Sanjay
after the intercoat with the kandy and flake mix that u sprayed did u go over with the second cup of kandy u mixed without the flake then clear coat ? was wondering if u used the 2nd cup off camera then clear
I used the one cup mixed, it was enough for the sportster motorcycle tank only. However the second cup was there incase I needed it. I could have sprayed the green candy mix without the flake for a more deeper green candy look. The second cup I used on another project.
@@MrCeez1 ok thanks for the reply
And THAT is what I hope to do to my 79 Camaro, but probably 1/2 the flake. Maybe
I hope you get her done. Good luck
What color base coat did you use?
Black base
It sure is nice to spray @ 10 psi limited waste / over spray especially. when it comes to any House of kolor products. Pricey and wurth every dollhair .
I spray at 25 psi. On a regular spray gun.
There are low volume low pressure guns that require less air pressure.
What is psi ?
@@aakhilbeig6552 air Pressure per Square Inch.
One thing I learned over the years...never have a long mixing stick it's a disaster waiting to happen. I always break it when possible.
Good Advice.
Lit up
Yup sparkles. I Still need to add graphics or flames. Not sure yet.
What size metallic flake did u use?
.015x.015 standard size flake.
There are larger flakes or micro size available too.
With what size tip?
@@kevinarcher7701 I used 1.3 nozzle
Nice job! Which metal flakes did you use any links? And size
Ron I get my metal flakes from Coast Airbrush or Tcp global.. .015x.015 standard size. Emerald Green flake is the color.
@@MrCeez1 i appreciate the reply
@@MrCeez1 Do you need a specific type gun for this??...
@@Jason_Family_Man yes you do for these reasons, depending on the size of flakes you are going to spray.
1. Mini flakes 1.2-1.3 fluid nozzle
2. Standard 1.3-1.4 fluid nozzle
3. Large 1.5 fluid nozzle
Some painters have a separate spray gun just for flakes to not contaminate non metallic paints. It doesn't need to be a high end spray gun just a quality spray gun.
@@MrCeez1 Thank you for the reply......
I really appreciate this info.
Just getting into it and it's awesome ☺️
👍😎
thank you
👍👍👍👍👏👏👏👏
Thank you 👍
Very good
🇺🇸
Do they have purple paint with green metal flakes
Richard there is a flip flop paint that is green and purple. Google flip flop paint you'll see many colors. More like pearl purple and green.
Well that eliminated a step rather than having to lay the flake, clear over that, and then candie over it afterwards. I was wondering about doing this to cut steps down but wasn't sure it was possible, now I know!!
Two different methods will result in two different looks.
Yes, I'm going to experiment with some different mixtures and see what I get!
Didn't know I could mix my andy n flake I'm a newbie thought they were different steps
You can do the same procedure with green pearl and green candy as well.
What's the color green like that code
@breadjackson KK09 organic green, by house of Kolor
What size flake?
.015x.015 standard size flake.
@@MrCeez1 what size gun？caliber？
@@travelinband1472 Hey 1472, The gun was 1.4 in this video. 1.3 to 1.5 would work for flakes. Smaller flake size 1.3
thanks
Cómo sé llama lo que el señor está usando para pintar
¿Te refieres a la pistola de pintura o pintura que estoy usando?
pistola de pintura 1.3 tenka
sistema de pintura house of kolor
es muy caro pintar el auto asi con brillo ???
sí se vuelve caro, materiales y mano de obra.
De pende dayana
Mano se vc explicasse os materiais que vc tá usando p gente saber como faz 🤦♂️
El material utilizado es de house of kolor. Usé pintura negra base, pintura transparente verde caramelo y agregué escamas verdes a la mezcla de pintura transparente.
bhai kun si contre se ho call us too
Está bueno pero no tiene una explicación con audio para que sea más comprensible
Disculpa, dime en que te puedo ayudar
जिससे मैं आपसे बात कर सकूं कुछ मटेरियल के बारे में
क्या है वह?
Candy green towner formula how i can made in home
آپ آن لائن پڑھ سکتے ہیں۔ کینڈی پینٹ آٹو پینٹ کو مکس کرنے کا طریقہ ٹائپ کریں۔ ہاؤس آف کلر ویب سائٹ تلاش کریں۔
آپ آن لائن پڑھ سکتے ہیں۔ کینڈی پینٹ آٹو پینٹ کو مکس کرنے کا طریقہ ٹائپ کریں۔ ہاؤس آف کلر ویب سائٹ تلاش کریں۔ مجھے نہیں معلوم کہ آپ ویب سائٹ پر جا سکتے ہیں یا نہیں لیکن ان کے پاس ویڈیوز بنانے کا طریقہ ہے۔
That was not a 2-1 ratio. You used the wrong “5” in your first measurement. You ended up mixing it backwards, like 1-2 ratio. Way to much reducer, but it worked out.
I'll have to go back and watch again. Thanks
House of Kolors is the best...👍🏻💪🏻🏁
Yes good paint line. HOK is quality stuff.
@@MrCeez1 Yeah definitely, I worked in a big collision center for 15 years. I was a technician though. Hung sheet metal, took cars apart, put them together. I did suspension work alignments, A/C, all that stuff. I was a problem solver as well. But I've seen some really nice HOK jobs come out of our booth...👍🏻
@@murk1352 sounds like a cool place to work. I restore on my days off. Be safe
@@MrCeez1 You to brother! Yeah I worked there a long time ago though. But it's still an awesome place...👍🏻🙏🏻🎄⛄
👍👌👌🇦🇲🇦🇲
Thank you
معلهش..
اى دهان متالك يتخفف ازى ويترش ازى
أنا لست متأكدا ماذا يعني لك.
Sir i am from pakistan
Orlando 34
Orlando 34
Bhai esaka prise batavo
yah kaale thos rang ke oopar, hare dhaatu ke phlek ke saath kaindee hare paaradarshee pent ka mishran hai.
Need to give more instruction dud not say what base is
The fuel tank had been primered, then black base coat paint. Followed by the candy paint metal flake mix. Clear coat paint over.
Is this guy a funkn mute??😂😂😂😂😂
कांटेक्ट नंबर चाहिए
आप क्या जानना चाहते हैं