Miller Spectrum 375 Review and Demo. Plasma Cutting 101
Вставка
- Опубліковано 26 сер 2024
- Thanks for Watching!!!
High PSI tv Merchandise Available Below:
highpsitv.bigca...
Help me get to 100,000 Subs. Yea I know its a big number.
Set your goals high.....
-------Be sure to subscribe TODAY
Big things coming SOON! Stay Tuned. You wont want to miss it.
Check me out on IG
/ high_psi_tv
Also be sure to check out John Doc
/ john_doc1
and
RPM Motorsports
/ rpm_motorsports_nc
You always make the best video's that I have watched! you explain everything very well.
Nice work Jeff. I enjoyed watching.
Hey jeff great video as usual. Matt from URCHFAB has a good video on plasma cutting. Only pointing it out because he's used one for alot longer then you have. learning tricks from an old hand is always good.
Almost 20k subs! Congratulations!
I have had this cutter for 15 years now and it been great unit the only thing is upgrade the torch !! get the Torches XT30C for Spectrum 375
255685 it will make cut better
Where can you get that torch and how much$$?
If you move a little faster you get a cleaner cut and the slag will just knock off the back side easily with a small hammer.
Very good video and review, great job explaining things
Good vid. The contact thing is a total myth though.
hello there Jeff. cool video bud. hope all is well with ya. stay safe out there and take care Sir.
Sounds like it takes a LOT of power to operate that. LOL
Hey jeff can you do some more tig instructional videos like the one you did with John doc....btw your intro and outtro is the best🔥🔥🔥💪💪💪💪💪
I can
Plasma cutter. One of the only things in the shop that if your hands under what you cutting, you can cut your finger off and you wont even feel it. A guy in a shop always tells that story. he didnt even realize it got lopped off till another worker saw it resting in the bottom of the catch bucket. He had pictures.
Damn
@@HighPSItv life we live. Once you dont respect the equipment itll bite ya. Ive been there.
Helpful, thanks 👍
Very cool
Love the video. Hate intro that blows my f?@king ear drum out with air pods
Please don’t use any flammable gas, including oxygen on a regular plasma cutter, or torch. That’s very dangerous. The torch could burn up almost instantly, and the fire could rush back into the torch cable, since there’s no flashback arrester. Equipment that allows those gasses are expensive, and industrial.
If that plasma cutter uses HF how do you protect a cars electronics. if you add some extra O2 to the air will it cut better? Or just destroy tips? LL&P
How did you wire the machine? Did you completely replace the coard and plug for 240, or cut the 110 plug off and add a plug for 240. I want a longer reach and want to use 240v. Where did you olace the wires for 240v
It came with all the wiring adapters I needed. No cutting required
Buenos días eso funciona con gas o aire
what compressor are you using? I will be buying my first Plasma cutter and Compressor so I want to make sure to get one that will work well.
I use a 2 stage Ingersoll 60 gal
Me parece un aparato muy útil amigo
Gloves man , otherwise nice work
Shouldn't you be wearing gloves? I know you are cutting thin metal, but if you cut too fast, won't it spatter up at you?
Most the sparks go down. Havent been burned yet
There’s still a lot of UV coming out of that.
Igive O% of safety lol🤣🤣🤣🤣🤭🤭