Did that first teflon tape trick and lowered the joules difference from .3 to .03. Also augmented the oring & inner barrel trick by adding some electrical tape towards the tip of the inner barrel. That in combination with the hop unit shimming minimized a lot of the play in both my inner and outer barrel. Can’t wait to test out the performance when I play again
i wish i found this video so long ago, i lost my front sight because i only used your set screw and lock tight and i had the hardest time figuring out how to set the fronts without losing it again
Hi.. great information and tips. I have a cz shadow 2 by asg and looking to upgrade the barrel hop up chamber, springs all important enter Al except trigger as I want to make it a hpa gun
I wonder if you could design a tuneable trigger bar that would come with a set of shims to put in a special slot between the trigger and the trigger bar drill a small hole next to the trigger and put a tiny screw in there that will push the trigger bar back if adjusted in this is easy for plastic grips science a metal grip would need the hole tapped if tuned properly you can get the trigger to the point when you can hardly see it move depending on the build
Great tips! When i bought my cowcow and edge bbu 3-4 years ago or so i never got them to work, slide would sound super weak and it wouldnt really cycle great, now i use the stock one in an AM slide and that works super snappy. Do you guys know what the issue could be?
Hi I’ve been watching ur videos I have a Tokyo gold match I bought a lim cat gold slide for it Ive watched video on haw to properly put it on but keeps getting stuck back and I’ve tried to free it off but it’s not working would there be anything I might be able to try to sort my problem out Thank u
I would try hand racking it a lot! You can use some lube on it to make it smoother. If you have to, you can use a jewelry file on the rails to remove material!
What if you put an o ring on the two sides of the inner barrel for an after market/stock barrel (I have a WeT 5.1 type k semi auto so the stock one for that
I built my hi capa around 8 months ago and I lost the set screw for my trigger. What size would I need to get a replacement for it? It’s a Cowcow trigger btw.
I cant imagine ever using PTFE tape or super glue in any airsoft gun I own. I get that people do it, I would have trouble sleeping at night knowing my airsoft gun has superglue, JB weld, black tape, Velcro, PTFE tape, etc.. inside of it. Best thing to do is just buy well fitting parts inside.
Amazing review! What I would add and have used, is steel bearing washers that can be found cheap from any hardware store. Can be used to complement short-stroke buffers: here at 02:50 ua-cam.com/video/Z1rmjSubllM/v-deo.htmlfeature=shared
The Teflon tape on the slide catch helped tremendously, before it would fall out mid shot if I tilted it slightly to the left. Now it says in place.
It's a great thing to do to keep it all tight!
What other tech tips do you recommend? And which tech tip from the video was your favorite?
Did that first teflon tape trick and lowered the joules difference from .3 to .03. Also augmented the oring & inner barrel trick by adding some electrical tape towards the tip of the inner barrel. That in combination with the hop unit shimming minimized a lot of the play in both my inner and outer barrel. Can’t wait to test out the performance when I play again
For the cork trick, you can also bend the right prong back _slightly_ .
Really amazing how much thought u guys put into your products. Hi Capas definitely wouldn’t be the same without u guys. 👍 🔫
i wish i found this video so long ago, i lost my front sight because i only used your set screw and lock tight and i had the hardest time figuring out how to set the fronts without losing it again
Thank you so much for your builds. I'm a fan from Philippines 🇵🇭 hope to have a lots of parts to be available here as well. ❤
Just signed with an Asian distributor, so should see more of our stuff that way soon!
I just tried out the trigger mod and I love it .
Awesome, I hope you enjoy an infinite amount of shorter pulls!
after the teflon tape, fps were incresead from 285 to 315fps, do you think I will break the slider?
Great video! Thanks for putting that together, I am sure it will help those new to the sport :)
For sure! I think it's a good range so everyone can learn something!
One of my friends uses Lego tires for his short stroke kit
A great method, however I would highly recommend spending the $10 for our short stroke kit 😂
That is amazing ,gotta try it
I JUST SAVED 10 DOLLARS
When you discover that Lego is TM compatible
@@papichulchimpul9472 hahahaha
i use masking tape to shim the hop chamber to the frame haha. I've also used it to shim my TM AKM GBBR's aftermarket dust cover.
That's perfect!
hello sir may i know what oring size did you use for the inner barrel?
What o rings are you using to put on the inner barrel for the stabilization?
Hi.. great information and tips. I have a cz shadow 2 by asg and looking to upgrade the barrel hop up chamber, springs all important enter Al except trigger as I want to make it a hpa gun
Trigger mod is so cool
Yes sir, I've never seen anyone else do it!
Great information
I wonder if you could design a tuneable trigger bar that would come with a set of shims to put in a special slot between the trigger and the trigger bar
drill a small hole next to the trigger and put a tiny screw in there that will push the trigger bar back if adjusted in
this is easy for plastic grips science a metal grip would need the hole tapped
if tuned properly you can get the trigger to the point when you can hardly see it move depending on the build
Great tips! When i bought my cowcow and edge bbu 3-4 years ago or so i never got them to work, slide would sound super weak and it wouldnt really cycle great, now i use the stock one in an AM slide and that works super snappy. Do you guys know what the issue could be?
How do we fix a slide catch that doesn’t catch and a slide that gets stuck all the back and only move by slapping?
Hi I’ve been watching ur videos
I have a Tokyo gold match I bought a lim cat gold slide for it Ive watched video on haw to properly put it on but keeps getting stuck back and I’ve tried to free it off but it’s not working would there be anything I might be able to try to sort my problem out
Thank u
I would try hand racking it a lot! You can use some lube on it to make it smoother. If you have to, you can use a jewelry file on the rails to remove material!
What if you put an o ring on the two sides of the inner barrel for an after market/stock barrel (I have a WeT 5.1 type k semi auto so the stock one for that
I built my hi capa around 8 months ago and I lost the set screw for my trigger. What size would I need to get a replacement for it? It’s a Cowcow trigger btw.
Сделал на камере хоп-ап установочный винт как показано на видео для плотной фиксации и после игры у меня камера хоп-ап сломалась 😢
Can you make a hi capa barrel that the hop up and the outer barrel are one piece ?
what are the size o rings? :3
Do have inner parts for irex 6.0
What diameter of O-rings do you use for stabilising the outer barrel?
What are the inner diameter and outer diameter?
I cant imagine ever using PTFE tape or super glue in any airsoft gun I own. I get that people do it, I would have trouble sleeping at night knowing my airsoft gun has superglue, JB weld, black tape, Velcro, PTFE tape, etc.. inside of it. Best thing to do is just buy well fitting parts inside.
Where do you get cork board
Amazon, you can buy a big sheet of it! I found this, more than you'll ever need: a.co/d/i5zSCQm
Nice!
Thanks!
Any tips for glock?
Amazing review! What I would add and have used, is steel bearing washers that can be found cheap from any hardware store. Can be used to complement short-stroke buffers: here at 02:50 ua-cam.com/video/Z1rmjSubllM/v-deo.htmlfeature=shared
P r o m o s m
Gracias @airsoftcta