These videos keep reminding me that I've got to rebuild my engine... It has been sitting with a few blown apex seals for 12 years now. Man you make me feel lazy.
I have run a CAT D8 Bulldozer and that thing is a beast. You can hear the turbo screaming on that thing as you just plow through thousands of pounds of dirt. If you really go against a mountain of dirt the huge steel tracks will actually spin in the dirt.
One of my friends watched this video before me and told me the turbo was big... I wasn't expecting it to be quite that big! That looked insane when you were holding it. Hope all goes well installing it
that thing is going to be so bad ass. im building a 1khp 5.3 going with an 88mm. your rx7 is probably one of the most bad ass car out there. i wish you luck with your build and i cant wait to see it up an running.
Amazing episode Rob, you've redefined what it means to have a big single turbo in the FD Universe. Comment about the turbo being part of your workout routine was a ROFL moment. Watching this build with much interest :)
Man I wish you all the best Mr.Rob, can't wait to see your rx7, right now I'm already drooling and eager to see how it goes, though till now I'm comparing it or maybe just assuming it might be as bad ass as Mad Mikes project HUMBUL cuz that RX7 in my opinion is mouth watering so I can't wait to see yours roar and make the rotary family proud. Good luck
Love your videos, I know your channel has 1 million subscriber potential. You have an awesome car and the humor to make that happen. In my case, not si much. Mahalo! See you at SEMA in Vegas
This and thatdudeinblue's build are super inspiring. I am going to start an Opel GT project with a 13b, and I hope to make it a fun and exciting journey I will share on youtube later.
you really should say a "smaller" furious Pete, because lets be honest, he aint small, hes in great shape, furious Pete is a body builder and competitive eater and also in great shape, but a bit bigger.
The S480 on the 3 rotor is a journal bearing turbo, isn't it? Compared to this Garrett which is ball bearing. Is that what makes the biggest difference in response, or is it just down to the size of the turbo compared to the increased exhaust of the 4 rotor.
god dam @rob Dam are you trying to make the 4 rotor a jet or something? I was expecting a bigger turbo but that 98mm is insane!!!!! good good good job! excited!
If you want to spool fast go with Borg Warner EFR, its amazingly responsive, ceramic ball bearings and that gamma-ti turbine makes a world of a difference
Rob pleaseeee do longer videos. I fucking love your vids about your x-7's and wish for longer vids about building, or just talking about what you are going to implement in your 4 rotor. Keep it up!!
Dude your rx-7 is badass to say the least, that scene of you on the highway had me laughing my ass off of excitement, can't wait to see more of your stuff, subscribed definitely!! And my gawd that turbo though lol
That turbo is pretty much the same size as turbos that go on diesel engines in 18 wheelers! I know, I've handled a few myself. I wonder who manufactures those. Dorito powahhh!
Im really gunning to purchase a used challenger after I graduate to mess with and make a little man-mobile, as unbiased as possible, would you recommend a large turbo for high rpm high pressure boost, or a large supercharger for lower pressure but boost throughout the rev range?
That turbo is going to end up wrecking all kinds of shit on that car lol. Prob the biggest turbo i've ever seen. Damn! I mean any more up from that you're talking Trains and Ships.
That turbo is not meant to make horsepower, it's meant to distort the atmosphere!
😂😂😭😭
I think he's going back to 10/21/1955.
Creating folds in space time to move the car forward. ;D
***** rips the space time continum.
it was made to suck in and stop tornadoes
Boost kicks in 40,000 rpm 6th gear
Did you watch the video?
+Jeferson yea
We are expecting 60,000hp at 130,000 rpm
link to the video please.
Does anyone else hear Turbo Yoda's heavy breathing in a distance?
*Symphony in the background* TuuUUUUuuurbooo yoooooodaaaa
+Jurre Volkers HE'S THE TURBO YOOOOODAAA
But will it fit on my Honda?
Qgal5kap123 your Honda will fit on it.
ayy..lol
He might not be the most known car guy.. but god damn is he the most unique..
Welp there goes all of earth's atmosphere.
Lol. I am please to announce a magnificent breakthrough in the scientific community! We have officially discovered the source of black holes. 😂
holy shit thats a big turbo....
you sure your not attaching the rotary engine to the turbo?
we will have to wait to find out.
Jesus somersaulting Christ O___O
Your RX7 is going to be blowing the tires off every gear lol
I'm expecting a box full of several neutral gears
Yeah, blowing the tires off in to space! LOL
The name Syrinx aruanus seems apt for this turbo, it's also the name for an extremely large snail that weights up to 18 kg (40lbs).
Nice. Aruanus because you'll sht your pants if you're near this thing.
DAAAAAHM!
dahm bro dat is a big alternator
Member of a gang Puts out 20v at 6,500 RPM
its still not big enough
+Rotary Power nah he needs one for each rotor haha
+GamerID Mike lol meant to reply accidentally hit report, anyway castol rx2 has 4 turbos per rotor lol coolest 4 rotor on a drag strip if you ask me
Wow a 16 turbo 4 rotor rx2! I've never heard of any one doing that before.
+Brent The Bunny lmao didnt mean to say that, meant turbo per rotor
ya it needs one of those per rotor
That's a huge turbo! Just want to say rob that ever since seeing your rotary videos, I've become a bigger fan of rotary. Thanks for the contents! :)
Rob been taking some trips to gainsville
These videos keep reminding me that I've got to rebuild my engine... It has been sitting with a few blown apex seals for 12 years now. Man you make me feel lazy.
I know how that is. I waited 4 years to rebuild my 12a. The car is still not finished.
And I need to whipe my ass, I'm still sitting on the toilet. Thank you for the motivation.
+BoobieNizer
Omg same here.
rob dahm, delivering power linearly since never....and i love it
The Doritos had me crackin up lol
I have run a CAT D8 Bulldozer and that thing is a beast. You can hear the turbo screaming on that thing as you just plow through thousands of pounds of dirt. If you really go against a mountain of dirt the huge steel tracks will actually spin in the dirt.
My gaawddd! That turbo is nuts! What kind of mounting hardware you going to use to keep that thing steady!
Superman will be holding it in place!
a whole lot of elbow grease
jesus's arm pit sweat
One of my friends watched this video before me and told me the turbo was big... I wasn't expecting it to be quite that big! That looked insane when you were holding it. Hope all goes well installing it
that thing is going to be so bad ass. im building a 1khp 5.3 going with an 88mm. your rx7 is probably one of the most bad ass car out there. i wish you luck with your build and i cant wait to see it up an running.
Amazing episode Rob, you've redefined what it means to have a big single turbo in the FD Universe. Comment about the turbo being part of your workout routine was a ROFL moment. Watching this build with much interest :)
Don't die Rob, love your videos too much. You are a boost addict.
That's a big ass snail
Holy crap Rob that's insane! Can't wait to see more progress on the build! By the way looking classy in that Super Mario shirt :D
Absolutely insane. I can't even believe you're doing this, I cannot wait to see the results! And hear them!
IM SO STOKED HAPPY FOR YOU ROB I MIGHT HAVE TO JUST GO TO VEGAS TO SEE THIS BEAUTY LIVE IN PERSON AND ITS IN MY BIRTH MONTH
*Revs engine* *A kid dissapears*
hahaha love your videos dude! keep it up!
and...
UPLOAD MORE FREQUENTLY.
please.
Maybe it'll pull the potholes back to street level...we all know how roads are in MI
Have you been working out?
+Rob Dahm you should do some workout vlogs
Some of that probably comes from steering an rx7 without power steering haha.
thats a nice chest fly exercise right there
I cannot wait till this build is done...this car is going to be so fucking unreal
You listen! Nice love the rx7s
+Rob Dahm hi from Puerto Rico...i thought the 4 rotor was going in the 13b rx7....or is it going in the 20b rx7?
In the future we don't run with the AzOne crew.
+Bebo Nahlo still going in the 13b. he just showed the 20b as an example
+chinchy111 ohhhh thanks
agree
are you planning to travel back in time with the new engine? kind of looks like it
Wow. That's crazy .Been looking forward to this for a while.
Once completed, this will be the best rx7 I will ever witness
Now that's a TURBO!! Damn.
Ok you just earned my subscription. Thumbs up!
Man I wish you all the best Mr.Rob, can't wait to see your rx7, right now I'm already drooling and eager to see how it goes, though till now I'm comparing it or maybe just assuming it might be as bad ass as Mad Mikes project HUMBUL cuz that RX7 in my opinion is mouth watering so I can't wait to see yours roar and make the rotary family proud. Good luck
Dahmmm Rob... You are a mechanical legend! I can't wait for the 4 rotor! It's going to be well worth the wait! Keep up with the good work!
This is going to be amazing. Nothing beats the exhaust of an rx7
largest turbo I know of is a " Turbonetics Thumper " the Inducer blade itself is 115 mm. it is capable of over 2500 hp.
Whoa Fawk that is HUGE! Thanks for also posting up that compressor map for that turbo!
Nice!
Good to see you're build is coming along. I've sadly had to give up my little 500 hp build. Hope to see more real soon son!
Love your videos, I know your channel has 1 million subscriber potential. You have an awesome car and the humor to make that happen. In my case, not si much. Mahalo! See you at SEMA in Vegas
Awe man ! That's just awsome! Wish I knew how to get "big names" to help on my fb 12a turbo...
This and thatdudeinblue's build are super inspiring. I am going to start an Opel GT project with a 13b, and I hope to make it a fun and exciting journey I will share on youtube later.
NOVEMBER, Dahm you killin me!
finally.... a video from you worth watching
+Rob Dahm looking forward to the next one. popcorn in the microwave😀
this build is going to be beastly!!! cant wait to see more! love the vids!
YESSS!!!!!
Checked yesterday for an update!
Who thought today would be the day :D
rob you look like a small furious pete and you should call you turbo Garry the snail
you really should say a "smaller" furious Pete, because lets be honest, he aint small, hes in great shape, furious Pete is a body builder and competitive eater and also in great shape, but a bit bigger.
+Sam Sereda but that implies he is furious Pete and rob isn't rob is much cooler and i agree they are both in grate shape
Maybe I've had a few too many drinks tonight, but your response is confusing the shit out of me!
+Sam Sereda it's not just you...
I love this video 😂 " you think that turbo is big.. Well think again"😂😂
my jaw literally dropped! gonna make some serious choo choo power!
That is huge. This will be an amazing project.
I loved seeing you smile and laugh while holding the turbo
I got an 80mm on my 03 cobra good for 1000hp on "Max" boost
The S480 on the 3 rotor is a journal bearing turbo, isn't it? Compared to this Garrett which is ball bearing. Is that what makes the biggest difference in response, or is it just down to the size of the turbo compared to the increased exhaust of the 4 rotor.
that's awesome! can't wait to see the 4 rotor progress, i had reminders turned on so I dont miss it. (:
god dam @rob Dam are you trying to make the 4 rotor a jet or something? I was expecting a bigger turbo but that 98mm is insane!!!!! good good good job! excited!
HAHAHA so true! Can't wait for the finished product! It is honestly going to be mental #Jeremyclarksonfaceontheatom
Yaaaaaaaaassss!!!!! 4 Rotor update !!!!!!!!!!!
That fucking turbo was sent straight from the gods !!!
***** I don't blame you. I'd probably do the same exact thing. & I'm such it wasn't cheap by any means !
If you want to spool fast go with Borg Warner EFR, its amazingly responsive, ceramic ball bearings and that gamma-ti turbine makes a world of a difference
HELLYEAH ROBBIE BACK AT IT AGAIN WITH THE BIG TURBO'S
Can't wait to see it get completed.
Come to Supras In Vegas. September 22-25. Dyno day, show n' shine/track day (drag and drift), and joy cruise
Wow, awesome video! That thing is HUGE!
I love Rob Dahm right now... Rotary Mad Scientist.
Rob WTF, that's huge, really can't wait for more Videos.
Rob I officially think you're the craziest person in the world but I love it
Rob you getting buff dude! Look at this video compared to your first, or the first lambo videos! You're making all kinds of gains, all kindssss
@rob dahm I'm curious, but why not a twinscroll turbocharger? Or when you're dealing with so much power, it's no point?
5 months until I can see this car drive. man I cannot wait, 5 months is going to take forever to go by
Glad he mentioned "THEM GUNS" , all i could think about until that huge turbo reveal
Rob pleaseeee do longer videos. I fucking love your vids about your x-7's and wish for longer vids about building, or just talking about what you are going to implement in your 4 rotor. Keep it up!!
this is what I want to see on my UA-cam feed. thank you.
Bro when this build is done you better upload at lease 4 videos a week about this car. Can't wait till its finished.
Dahm, That turbo is nearly bigger than the stock 13b block.
Dude your rx-7 is badass to say the least, that scene of you on the highway had me laughing my ass off of excitement, can't wait to see more of your stuff, subscribed definitely!! And my gawd that turbo though lol
YOU CRAZY DUDE !!
so exciting
lmfao the 3 rotor dragstrip doritos clip was golden
Just looked up the list price on that turbo.... I admire the commitment. This is going to be a monster.
Please what is the compressor tip height and hub diameter of the GTX5533R ? Am using this for my gas turbine engine project.
Can you take the 80mm turbo off to make a side-by-side comparison with the new 93mm one?
That turbo is pretty much the same size as turbos that go on diesel engines in 18 wheelers! I know, I've handled a few myself. I wonder who manufactures those. Dorito powahhh!
Im really gunning to purchase a used challenger after I graduate to mess with and make a little man-mobile, as unbiased as possible, would you recommend a large turbo for high rpm high pressure boost, or a large supercharger for lower pressure but boost throughout the rev range?
not even into cars but ur channel is so interesting
so excited for this project
What about the transmission and drive line setup? I'm Sure it'll need something extra you could talk about.
it's about time!
Can't wait to see what you have planned for cooling that thing
I can't wait to see the future of this car
All do respect Rob and I really do mean that but my FD with a 13b is running low 11's, did you ever get that 3 rotor into the 10's?
YOU'RE A MAD MAN ROB
That turbo is going to end up wrecking all kinds of shit on that car lol. Prob the biggest turbo i've ever seen. Damn! I mean any more up from that you're talking Trains and Ships.
+fuckwad Especially considering that it's going in a street car.
+fuckwad Your name is incredible.
i used to make parts for turbos that big but those thing were for large boats and ships!
LOL yeah i'd imagine so. I wonder how he's going to fit the damn thing into the engine bay hahahaa.
I think he has forged internals and its a rotary so reliability was never a strong suit
its not rob dahm your nickname its God damn! Love Rx7
hi rob. what power are getting on ur 3rotor 20b with smaller turbo :)
I was reading the comments and thought everyone was overreacting, until I got to the part with you holding it. HOLY. SHIT.
Are you contacting Pirelli and asking for sets of their Ultra Soft compound for Formula 1? That, at full optimum operating temp, MAY hook. May.
If you rearrange the letters in "Rob Dahm Four Rotor" it spells out "BOOOOOST." This is awesome!!
Rob this is going to be the most bad ass mazda on earth.
3:02 HELL YEAH, I was already excited to go to SEMA this year now I cant fucking wait.
that tubros bigger than the engine. "hey bro i added some rotarys to my turbo"
have you gone over seas for the 26b?