Yamaha Tracer 9 accessories - Side cases mounting / Givi V37
Вставка
- Опубліковано 5 жов 2024
- Installation of the new equipment into my Yamaha Tracer 9 - side cases V37 NNT and side case holder PLX 2159 from Givi. Challenging is to combine Yamaha OEM rear carrier for top case with Givi side cases holder. There is needed to disassembly quite lot of fairings and add 2 new screws. If you want to see details step by step, watch complete video!
Take care and ride safe! ;-)
Big thanks for this video. Just got the panniers and all shops are closed due to vacation till 15.8.2022 and with the help of your video I dared to try on my own and succeeded 😊
Hi Janez, happy to hear that! You are skilled engineer! ;-)
Thank you so much for the tip with longer screws in case of Yamaha top case! I ordered Trekker 33 liters setup, this video will be very helpful during installation.
You could have used a short-arm Allen(tex-key) key to remove the back plate bolts I got a set of Amazon as I used the Shad system to fit side boxes on my Tracer 9 GT, these look very nice too
Dobra robota kolego. Dziekuje . Pozdrawiam z Polski
To rád slyším! Měj se! V.
Once again, you made a very beautiful and usefull video !!!! You have done a very good job my friend!!!
I always enjoy your videos ......Keep up the good work!!!! 👍👍👍
It really is. :) He got my like here. Drop by man. :)
I am very happy to hear that! It is lot of work behind that. Thank you and take care! Vaclav
@@venax2 i know my friend.... I know...lots of time and love is needed to finish a video...
One more time i have to say to you a big bravo for your videos... I'm looking forward to the next one!!! 👍
@@venax2 I know. You too, take care bro. 👍🙂
They look so much nicer than the Yamaha OEM.. Nice video
I have the same opinion, and it is bigger.
@@venax2is it my imagination, or is the right side bag bigger than the left aide bag?
@@jonrandall831 both bags are the same. Left and right have the same volume.
Čau kámo, moc díky za video, mám stejnou motorku jako ty, a koupil jsem si stejné nosiče. Pomohlo mě to při montáži, ještě jednou díky!!!!!
to rád slyším! Používám kufry jen párkrát v roce, ale uvezou dost věcí, jsou vodotěsný a jdou zamknout. Proto jsem je chtěl. Měj se! V.
Getting to top case bracket is insanity 😳
agree Ryan!
good lord so many clips... hate those recent bikes
A lot of work here. Nice video. Finally it looks great. Did you also think about getting maybe SHAD instead of GIVI? You got my like here. Keep up.
I had Shad SH23 in my previous Tracer 7. I like opening from top. But on Shad web-page, is SH23 not compatible with Tracer 9. But maybe it is. Therefore I looked for alternative and Givi looks well for me. I do not like how SH36 looks on bikes. (too wide) I think make bike even wider, but I cannot confirm.
@@venax2 I believe you. 👍
Nice!
Hi! Thank you for your video, exactly what I have been looking for. I am considering buying those panniers, couple of questions.
1. Is installation procedure easier if I don’t install top case?
2. Does this system have quick-release option?
3. Why you decided to use Yamaha’s Top case instead of Givi?
Hi Sergey, I am happy to hear that. Here are my answers:
1. definitely, w/o OEM top case is installation much easier.
2. I am not sure what you meat Quick-release option. But Givi offers something like that. I did not install and kept frame always on bike. (If you mean this)
3. When I bought bike, there were no Givi available on market. And I wanted to have top-case from the beginning I had a bike. Todays makes sense to buy full complet from Givi.
@@venax2 thank you! Are those givi side cases wider than OEM ones? Any cons for givi? Thank you!
@@SergeyVikultsev I cannot compare with OEM ones, I do not have them. Maybe Givi are a little bit wider. I think only cons of Givi is that you cannot use common key for ignition and you needs another key. From design and size point of view I like them.
@@venax2 thank you!
Nicely done, great tutorial. Those cases looks much better than original one. I'm looking for side cases for my T9 with yamaha top case mount like yours.
Can you please share what is the width of the bike with cases installed?
about 1m
I just bought Tracer 9 and was considering getting V37 panniers, which are more than twice cheaper than yamaha OEM ones, i was wondering how wide the panniers get, cause it seems a little bit wider than the handlebars
If I remeber right apporx. 1m (1.0? m, something like that). The OEM are smaller.
Boas. Que suportes laterais são esses?✌️
Nice video, thanks for sharing! What is the weight of that 50L top case? Thanks!
I think about 5Kg. It must be in Yamaha web or?
Is it better than Yamaha side cases? If yes, what are the differences?
I cannot judge. Advantage of Yamaha cases are 1 key for everything. Advantage of Givi is they are bigger and cheaper. Someone who wants yamaha cases buys GT model I assume. Aftermarket are for non GT owners I would say.
Takes almost as much work, just to get to the battery on my Yamaha FZ6 🙄
Is the top case plate metal or plastic?
It seems as Aluminium alloy
Ked sa tak divam na tie ramy kufrov, tak zacinam byt vdacny dealerovi, ze ma zlomil na GTckovu verziu... 😅
I think the side cases look great on the bike and so much more attractive than the ugly Yamaha original ones. The only downside for me though is all the scaffolding you have to fit on the bike to support the cases. It's a pity that GIvi can't come up with a way of using the original fixing points.
Im not a particular fan of Givi, but they can't use the original fixations just due to the fact that their bags are for several diferent models, so they have to keep their fitting Universal making only slight changes to accomodate where it bolts to the bike, if they were to use the mounting spots of the originals on the Tracer they would have to change the docking mechanism on the bags
Great 1970s porno music 😂
I love it ! 😀
Son horribles los soportes
Mucho mejor las originales,