2008 Harley-Davidson Softail Deluxe Cholo Build

Поділитися
Вставка
  • Опубліковано 11 вер 2024
  • Hey guys! this is my first video on my bike (Ruby) and just giving a run down on what she’s got done so far, if you got questions about anything leave them below and i’ll answer.

КОМЕНТАРІ • 21

  • @elvism5939
    @elvism5939 2 роки тому +1

    Great bike, keep up the good work. Got a 2005 and about to do what you did

    • @seabass_m
      @seabass_m  2 роки тому +1

      thank you, good luck on your build

    • @elvism5939
      @elvism5939 2 роки тому

      Did you do any suspension work? Thank you for responding. Your work is inspirational.

    • @seabass_m
      @seabass_m  2 роки тому +1

      @@elvism5939 i have not, no suspension work done yet, i’m planning on going with progressive mono tubes with 2” lower in the front and then the rear progressive 422 i believe

    • @IvanMorales-nm7hn
      @IvanMorales-nm7hn 4 місяці тому

      Did you tune after putting the mufflers or did you tune it before

  • @sergiovargas2776
    @sergiovargas2776 Рік тому +1

    What’s the brand name on your bag guards ?

    • @seabass_m
      @seabass_m  Рік тому

      as far as i knew they were just harley bag guards, from harley. i no longer have this bike but you can look for them in harley’s website or just a simple google search like “Softail saddlebag guards” i hope this helps!

  • @mikebingaman6485
    @mikebingaman6485 Рік тому

    Nice bike looks like it’s coming along pretty good can I ask you a question the on the gas tank did you remove the other Decals I have the 2017 heritage with the red in it I’d like to get them off I’m not quite sure how about doing that and putting ones on like you have can you give me some insight on that thanks very much love the bike

    • @seabass_m
      @seabass_m  Рік тому

      thank you, and yes, so put some painters tape around the ones that are already on you your bike, i’d put just two piece one in the top, and one on the front side so the front of the new one lines up with where the old one was, i had to use a heat gun and some floss but i’ve heard fishing line works the best, the one i have here in the video in total is 4 pieces, 2 brackets and two of the emblems, the brackets will have the 3m tape so you mount those first and then screw on the actual emblem, i hope this helped, if any question or more clarity is needed don’t hesitate

  • @RicardoGomez-cg1ev
    @RicardoGomez-cg1ev 19 днів тому +1

    What size are the the fishtail

    • @seabass_m
      @seabass_m  19 днів тому

      these were 39” samson fishtails, full exhaust

  • @wtfover4931
    @wtfover4931 2 роки тому

    Looks good, where did you get the straps for the blanket?

    • @seabass_m
      @seabass_m  2 роки тому +1

      Off of Etsy, Viclista has some nice ones too

  • @Thisdude1227
    @Thisdude1227 Рік тому

    Why did you have to get under the battery to put head pipe?

    • @seabass_m
      @seabass_m  Рік тому

      the connection for the o2 sensor is found underneath there, there was a gap that you could pull the wire thru and unplug the connection

  • @stanscroggins5523
    @stanscroggins5523 2 роки тому

    Hey what brand saddlebag guards are those on your bike ? Nice ride

    • @seabass_m
      @seabass_m  2 роки тому +1

      i believe these were the harley brand i got the bike with them

  • @aaronritzenthaler
    @aaronritzenthaler 2 роки тому

    I meant brake light, what’s your rear brake light set up?

    • @seabass_m
      @seabass_m  2 роки тому

      i had the custom dynamics LED tombstone tailight, it was great, i definitely recommend, i don’t have the softail anymore i got a bigger harley, still have to make a video on it

  • @aaronritzenthaler
    @aaronritzenthaler 2 роки тому

    What’s your rear brake set up?