I spent WAY too long trying to solve this and this was the best video to help with the issues at hand. not 1 single forum could tell me what i needed, but THIS! Thank you for your service good sir. You're a real one.
Thank you so much this helped a lot and now I have my own server, 1 tip I have if its not working for anyone is to reboot your router thats what made it work for me.
did you figure it out? if not go to your internet provider and find the port forwarding settings. should be in advanced. make sure you pc ip matches the port you choose super easy
Im having an issue where only I can connect to the server using the local host direct connect. But when I try to join or a friend join thru my ip after port forwarding it keeps saying connection failed. Ive allowed the connection/open port in the firewall but still no work. Ive tried using Himachi method as well still no luck. I pretty much have watched every video or tried every method and do not know what to do. I know other people are having the same issue to bcs on forums or posts its been an issue that i have not yet to see solved. Pls help
Sounds like a Windows Defender Firewall issue to me, I easy fix i've used is to go to settings and set your wifi/ethernet to private, it will let more things pass through.
2:09 I cannot find the place where to port forward when im on this page. And also it doesn`t look anything like this because my internet is from DNA (a Finnish internet company)
same her ei use telia and thernet but i cant find anytthing like that when i go on to telias log in thing it doesnt show up anything of the same pls help@@magnitops
the map and server worked but when me and my friend try to join the server it says it isnt found and when i go back to the repository to see if its there its been automatically disabled?? any fixes?
It would be (in most cases) 192.168.xxx , go into the computers command prompt, type "ipconfig" and find the number that goes along with the other numbers I just told you, and thats the ip.
I have spectrum internet but a orbi router, and it keeps saying my login info is wrong, do I need my spectrum info or orbi? And also the 2 IP don't work for me, so where do I find the router IP?
I did not understand any part of the port forwarding, and I need assistance. I use Windows 10 and I do not know how to access my router, or anything. I need help
Mine says connecting and done downloading all the resources but then it never actually loads into the map, help needed please I followed all steps very carefully.
I use BT wifi i live in UK I’ve followed every step and done every recommendation you left in comments for others but still it just says connection failed could you help me please 🙏
holy shit man ur so underrated this video has the best quality out of all beammp server vids. just make sure to delete it and repost it bc at 3:13 you revealed your ip. great video tho very detailed etc. keep it up
if i put a server on the server list insted of shearing my ip. can i add a password to the server so only people i know can join it ? if so how do i do that
I am struggling with port forwarding.... Wow I bet you haven't heard that one before. My router interface is much different than yours. The local Port and IP wants me to pick a device or enter an IP. What device should I pick, or do I enter a specific IP? If so What IP? I have a remote IP section as well with options for "All IP addresses" and to manually add IP's. I also have spots for WAN Ports start and end. Please help.
i need help at 2:10 bc i try to do port forward but it says a link i click and its say i need to install xfinty app on apple or googlr play what do i do
Nice video, i have a question how can i make a server for carp? Becuse whe i play solo my fps stay in 75hz in ultra with 3060 on 3 monitors, but online stay in 32hz and i don't know how i can't fix that sh*t.. So i think how make a server carp for can play with fps stable and play with my friends and slowly ping. Other servers just 130 ou more ping for me... U can help me? Sorry my english.. so so kkkk
Hey! So I did everything and it all seemed to work but after a while of searching for my server I found it, but when I tried playing it it said connection failed. 😢😢 if you have any tips on how to fix it plz tell me…. Great vid though
You shouldn't have to search for it. Just use direct connect with the ip "127.0.0.1" And for your other issue, I cant help you since I don't know what went wrong.
I tried this tutorial a few months back but i couldn't get it to work so i quit it, and now that im trying it again i cant make a new key cause apparently i can only make 2 keys. Any way to delete them or fix this?
Hey, I did everything the way you said, but it won’t connect to the server when I go to direct connect and put in my ip. Is it because I have 78 mods loaded?
great vid man, got my server running, but when me and my friend try and drive the car mods, on our screens we don't seem to be moving, just revving and turning of the wheels, is there a solution to this?
Hey man this really helped thanks. One thing. My server is up, I can join it however my mate can’t. It says connection lost or WSA failed to start. He was joining as a guest and I have server mods. Also my internet router is different to yours so I had some trouble translating the settings but I think I got it. Ik this is long but I was just asking because I cannot figure out the issue or what’s causing it. Thanks man
@@magnitops thanks anyway man, not sure what it could be. It might be because I haven’t port forwarded properly because my wifi browser thing is different to yours, I’ll figure it out👍
@Tayzer74 did u figure it out bro? My friend can't join and I'm pretty sure I did everything correct, it just says connection failed, I have a modded map and like 3 modded cars
Bro, thanks for the guide, I appreciate it. Btw, we can see you IP for a quick second before the grey box appears over it, id edit the video to cover it up better and then reupload it, just for your safety.
@@ARailFanPenguin What is you on? Go to 3:15, if you slow the video down, you can clearly see his IP. Also, why would I want his IP address? His tutorial was great.
Let me know if you want a tutorial for any other types of servers!
i cant connect to my own server?
i keep saying connection failed
@@2258mmm Make sure your connecting to the local host IP of 127.0.0.1.
idk how to open the interface
@@magnitops i did that but my friend still cant join thru my ip
I have no idea why, but this guide actually helped me to get my first local BeamMP server started so I can play it with my brother! Thank you so much!
I’m trying to do the same
@@CyjagGaming Me too, it won't work and I've been trying all day
literally
@@operatorcheescakman9153it worked for me rn, where are you having issues?
Wow, straight forward and quick to the point. Very helpful, thank you. And well done.
I spent WAY too long trying to solve this and this was the best video to help with the issues at hand. not 1 single forum could tell me what i needed, but THIS! Thank you for your service good sir. You're a real one.
Thank you so much mate! This is the only guide that actually helped me out. Keep it up!!
Dude I am so lost with the port forwarding. I don’t know the link for the arris. Can you please give it to me?
Only one that explains everything in a timely manner thanks dude
Do your friends need to install all of the mods manually, or will they install themselves automatically when they join the server?
Thank you so much this helped a lot and now I have my own server, 1 tip I have if its not working for anyone is to reboot your router thats what made it work for me.
Im having problems with the post forwarding part
did you figure it out? if not go to your internet provider and find the port forwarding settings. should be in advanced. make sure you pc ip matches the port you choose super easy
@@THEBLOODYBALLOON uninstalled beam because of it
Im having an issue where only I can connect to the server using the local host direct connect. But when I try to join or a friend join thru my ip after port forwarding it keeps saying connection failed. Ive allowed the connection/open port in the firewall but still no work. Ive tried using Himachi method as well still no luck. I pretty much have watched every video or tried every method and do not know what to do. I know other people are having the same issue to bcs on forums or posts its been an issue that i have not yet to see solved. Pls help
Im on the same boat unfortunately
Sounds like a Windows Defender Firewall issue to me, I easy fix i've used is to go to settings and set your wifi/ethernet to private, it will let more things pass through.
@@marcuscortes3262 Read the comment I left in this thread.
i have the same issue have you figured out how to fix it yet?
@@magnitops holy shit bro thank you so much, this was the one thing i need to get it to work so thank you
2:09 I cannot find the place where to port forward when im on this page. And also it doesn`t look anything like this because my internet is from DNA (a Finnish internet company)
Its either 192.168.0.1 or 10.0.0.1 . But thats here in the US, so milage may vary.
@@magnitops I mean, the first 6 numbers were the same, but the ending was different...
@@magnitops cap mine was different then these too
hey guys magnitops reviewer here, this video is uhhhhhhhhhh, great 10/10 recommend
Thank you so much! one of the best tutorials ive seen.
this is a very good tutorial thank you very much this makes it so much easier than other tutorials cause they are 20 min long
how do i make so that my server stays up because whenever i close the beam mp server tab is puts it offline
Minimize the cmd window, dont close it.
this was so helpful thank you and for your first video not bad super easy to follow. thx bro
i am confused on this part what site do i go to find this at 1:55
thanks for the help with the server but i saw your ip not going to do anything with it (because i dont know how to use it)
1:53 DO you need to do this step because I have never seen or used this webite before?
Its not the same for every router, and yes. You do.
same her ei use telia and thernet but i cant find anytthing like that when i go on to telias log in thing it doesnt show up anything of the same pls help@@magnitops
bro can you help me i just cant get it to work i put in the Auth key still tells me that there is no Auth key!
the map and server worked but when me and my friend try to join the server it says it isnt found and when i go back to the repository to see if its there its been automatically disabled?? any fixes?
Someone give this guy a raise! Amazing mate!
How would I connect If i am running the server off a computer in my house that isnt my computer when i try to connect it just keeps saying connecting
It would be (in most cases) 192.168.xxx , go into the computers command prompt, type "ipconfig" and find the number that goes along with the other numbers I just told you, and thats the ip.
Thank you so much this helped me and my friend not have to use laggy public servers and allow us to use some cool mods this was very helpful.
Sir, perchance do you live in Pleasanton, California
Great vid man, only tutorial worth watching.
Is the port forwarding thing not just gonna leak your IP address, and i use an AT&T one and its hard. This is impossible
Idk how these works i did it but Now i cant even launch the server it says something about mods not being directory and idk what im supposed to do
how do i do it with a telus router it says nothing about port forwarding when im logged into admin
I have spectrum internet but a orbi router, and it keeps saying my login info is wrong, do I need my spectrum info or orbi? And also the 2 IP don't work for me, so where do I find the router IP?
tried to set it up but when i get to the ip/port forwarding the page load up
I did not understand any part of the port forwarding, and I need assistance. I use Windows 10 and I do not know how to access my router, or anything. I need help
Mine says connecting and done downloading all the resources but then it never actually loads into the map, help needed please I followed all steps very carefully.
I use BT wifi i live in UK I’ve followed every step and done every recommendation you left in comments for others but still it just says connection failed could you help me please 🙏
If you have more than one router/modem/access point you will need to port forward on all of them.
@@magnitops Thanks for the advice mate but I managed to get it sorted I had entered wrong IP for PC 👍
@@kesbo09where did u enter it wrong?
Idk if its just me but my server isnt working now. It was worrking untill I added mods and changed the map
in my portforwarding settings i need to add a dst ip adress, what should i put there?
how can i do portfording if i have another router?
it wont let me open the file it just comes up with a note pad thing
holy shit man ur so underrated this video has the best quality out of all beammp server vids. just make sure to delete it and repost it bc at 3:13 you revealed your ip. great video tho very detailed etc. keep it up
Its allr, its a dynamic ip, but thanks man!
i dont get how to do port forwarding
if i put a server on the server list insted of shearing my ip. can i add a password to the server so only people i know can join it ?
if so how do i do that
I am struggling with port forwarding.... Wow I bet you haven't heard that one before. My router interface is much different than yours. The local Port and IP wants me to pick a device or enter an IP. What device should I pick, or do I enter a specific IP? If so What IP? I have a remote IP section as well with options for "All IP addresses" and to manually add IP's. I also have spots for WAN Ports start and end. Please help.
In Command Prompt type Ipconfig, and find a number that looks like 192.168.x.xxx, try that for the IP, and Port is 30814.
im at the 1:30 mark and what do I open the Server config file i cant get it to open up
actually 1:15
nvm got it
Can you have multiple servers or just one?
but when i download the server one its not a zip file its just an applications :( ??
Please someone help me, I have downloaded the server and have winrar installed but the server file wont open the winrar. Can someone explain?
I did port forwarding from control panel, its ok?
From Windows Control Panel? If so, no. Your freinds will not be able to join, it has to be through the router or with LogMeIn-Hamachi.
incredible video, was really easy setting this up after watching! earned a like/sub, thank you :)
This video is up for a month. Nice video but I have a question. Can you run the server only without the game files downloaded from Steam or others?
Yeah, it can run standalone.
thank you for the tutorial it has help me and my friends make sever to enjoy the game to it fullest
i need help at 2:10 bc i try to do port forward but it says a link i click and its say i need to install xfinty app on apple or googlr play what do i do
Hey! xfinity recently made it so you port forward via a phone app, its stupid, but the only way to do so.
@@magnitops thanks bro
@@magnitops wait if I have to do on mobile how would I be able to get the server on bmng
@@Topthunder2 You only portforward on your phone.
@@magnitops ohhh
Nice video, i have a question how can i make a server for carp? Becuse whe i play solo my fps stay in 75hz in ultra with 3060 on 3 monitors, but online stay in 32hz and i don't know how i can't fix that sh*t..
So i think how make a server carp for can play with fps stable and play with my friends and slowly ping.
Other servers just 130 ou more ping for me...
U can help me? Sorry my english.. so so kkkk
As of right now, I do not belive there is a way to make a solo CARP Server sadly.
Is there a way to enter the ip thru mobile app with xfinity
I need help when i try to join the server its just stuck on start
Thank you! this is the only guide thats made sense
whn i join my server it loads the mods and just says done and nothing else not loading screen just "done."
Give it a minute. It freezes up some time.
hey can anyone help me i have a starlink router and it just says im connected to starlink when i try to go into the settings please help
Hey! So I did everything and it all seemed to work but after a while of searching for my server I found it, but when I tried playing it it said connection failed. 😢😢 if you have any tips on how to fix it plz tell me…. Great vid though
You shouldn't have to search for it. Just use direct connect with the ip "127.0.0.1" And for your other issue, I cant help you since I don't know what went wrong.
I tried this tutorial a few months back but i couldn't get it to work so i quit it, and now that im trying it again i cant make a new key cause apparently i can only make 2 keys. Any way to delete them or fix this?
Just use one key?
still doesnt show up for me
how am i supposed to connect
It gives me an exe file when I download it not a zip?
It may have changed since the video. Are you sure ur using the server not the client?
@@magnitops ye its the same for me a .exe file
@@magnitops nevermind You just need winrar
you need win rar
Where’s the auth key I’m trying to host a online server with all my mods
The auth key is in the Keymaster.
it tells me connection failed when i try to connect. please help!
Hey, I did everything the way you said, but it won’t connect to the server when I go to direct connect and put in my ip. Is it because I have 78 mods loaded?
Make sure your connecting to the local host IP of 127.0.0.1.
If i host the server on my pc and play on my own server will it cause lag or fps drop on my part? Thanks.
I've never had it drop FPS. But I run high end machines.
Running a medium/low end setup and didnt encounter any issue
does the max cars setting in the config file limit the number of cars that can spawn in traffic too?
Yes, its max cars in total. (dont quote me on that)
awesome video! Going to try to set up my server in beamng
cars are not loading up on the server in the game but its in the resources client folders but it has no cars in the multiplayer lobby
Some mods are zipped incorrectly. Open the zips and compare them with known working mods.
Do I have to leave the server page up in the background for people to join?
Yes
How can i spawn traffic in the server?
Connection failed :( I don't know a way to diagnose the problem.
Is the server running? The command prompt window.
@@magnitops Yeah it’s running now. Works perfectly now. I just forgot to keep it running. Appreciate the tutorial, best one out.
I did everything like you but when i try to connect it says Connection Failed
same man its annoying ive done everything the same and doesnt work
For some reason after logging into my modem and creating a port, I go to open the server and it instantly closes. Please help me
no
Does it have to be tcp/udp or can it just be one or the other?
Both
this is straight forward and i like that but i still dont know how to port forward, i dont know to to login to my router
MY SERVER SAYS OFFLINE WHEN I LOOK AT IT ON KEYMASTER
Man thank you got to play with my frnd with it
broo plz help it kepps saying i need to verify my acc
in discored
It is easy but could you explain how i make like the password and how do i join the server?
So I have problem when i go to the thing to port forward it doesn't go there. Can you help.
You can also always use LogMeIn-Hamachi!
great vid man, got my server running, but when me and my friend try and drive the car mods, on our screens we don't seem to be moving, just revving and turning of the wheels, is there a solution to this?
Sounds like a port forwarding issue.
can not find the resource or server folder
port-forwarding is not working im from the uk
i dont have any advanced tab or anything like that
Hey man this really helped thanks. One thing. My server is up, I can join it however my mate can’t. It says connection lost or WSA failed to start. He was joining as a guest and I have server mods. Also my internet router is different to yours so I had some trouble translating the settings but I think I got it. Ik this is long but I was just asking because I cannot figure out the issue or what’s causing it. Thanks man
I have no clue at that point, sounds like an issue on your friend's side.
@@magnitops thanks anyway man, not sure what it could be. It might be because I haven’t port forwarded properly because my wifi browser thing is different to yours, I’ll figure it out👍
@Tayzer74 did u figure it out bro? My friend can't join and I'm pretty sure I did everything correct, it just says connection failed, I have a modded map and like 3 modded cars
Good Stuff Covered everything!
except for his ip
for my map i put the thing west_coast_usa causes thats what it said and it says map not found what do i do?
In the line perameter for map make sure it looks like this for west coast usa; /levels/west_coast_usa/info.json
Bro, thanks for the guide, I appreciate it. Btw, we can see you IP for a quick second before the grey box appears over it, id edit the video to cover it up better and then reupload it, just for your safety.
this is so obviously not true, you are just trying to get his ip.
@@ARailFanPenguin What is you on? Go to 3:15, if you slow the video down, you can clearly see his IP. Also, why would I want his IP address? His tutorial was great.
@@ARailFanPenguin bro what?? you can see his IP for a split second
Great video bro
where'd you get that wallpaper?
Wallpaper Engine idk the name tho sorry.
my router only says either tcp or udp no slash what should i do
Open a port for both
i can see my server in the serverlist but i cannot join, what could be the issue?
I would say connect to your own sever via direct connect and use 127.0.0.1 to localhost your way in.
even tho i enter the key it keeps saying specify a auth key or whatever :(
Did you delete the " or '
Helpful. You earn a subscribe
it only let me spawn 1 car when i set it to 8
is there any other way to port forward other than using your router's interface
Hamachi
@@magnitops thanks
I tried radminvpn but is hamachi better?
I can do it without post forwarding? I cant do it on my router i dont know why
You can also always use LogMeIn-Hamachi!
Do I need to turn off firewall on port forwarding?
No
Fire tutorial my guy thank you 🙏🏻
Always happy to help. :)
I really need help could you do a quick tutorial on how to install flood mod PLEASE?
Ill see if it's possible, some mods just plain don't work. Sorry.