I have sand drag for years. I feel you have plenty of tire. You are in some real soft sand there. You have a 2 spd shift at a 100 ft. The higher gear will load the motor and allow the tire to hook up. Your to use to hearing you belt drive no shift SXS running up the rpm. The car you have now has big horse power shift early to load the motor and hang on don't drive it like your SXS. Your doing a great job a little more seat time and you'll be the guy's to beat. That thing is awesome I've been following the build.
This. In sand you have wheel spin all the way through the gears, so an early shift will likely equate to faster wheel speed, spinning, to get more acceleration. I feel like the tires are 'catching up' to the gear as it's hitting the top of the gear. Unlike asphalt where you are locked in and need to rev out the rpm, here and early shift and get the wheel speed up higher. Sand and mud is all about wheel speed. Not traction so much as you would think.
is it running the stock oil injection OMP or is it premixed, this is a pioppet valved loop chared 2 stroke so i heard they like Motule 800 2t, not sure but its dry sump and oil injected and can run in any position fro what i heard. this is what the toyota s-2 stroke loop charged 2 stroke was based off of. This mor can ru tiled at 90 degree like any outboard could with oil injection! What would happen if i do this on motule 800 2t? how dies it compare to a marine 2 stroke diesel or rotary outboard.?
I got 5 quarts of Motule 800 2T for my rotary. Pricey stuff but runs good. Unfortunately my 8v92 Detroit 2 stroke and small block v8 2 stroke are to heave for a project like this. I picked up a 2jz motor and got it on amsoil dominator 2 stroke and working on a homemade oil injection system for it.
Geeze, to think that was sort of the vehicle you went orienteering in last year... crazy! I have complete respect for everyone on your guys team to put this together. When this thing goes, my jaw drops! I’m so proud of all of you!!!
I've been sand racing for a 1000years!, I think your lever A is interfering with the lever Fn B. 🍺. Adjust the What-not 2 clicks,then back it down 3. Drink and be merry, and try again tomorrow. Have fun yall!
That's one hell of a unit! Jp definitely has the power to go....but diggin' and going are two different things. She has the power and torque, put a BIGGER tire on! Damn that things scoots!!
This build is going to boost this channel!! Its unusually things that get views and this is as far out as it gets! Wishing the best for you guys!! Thanks for amazing content!!
I think with fluid surfaces, acceleration is transferred to the vehicle as long there is enough surface contact. The tires are gonna have a peak "pumping" rpm per foot and if you surpass that by X amount then you slow down. I don't know anything about it really but I assume it's similar to boat propellers. The amount of water they move should allow the engine to reach the power band and limit rpm to near peak HP.
@The Weapon Collection Horsepower is king, try walking in sand vs high horsepower and huge paddles, its amazing the amount of energy it takes but with the right set up its amazing
Go 6" taller with rear tire size to get more paddles on the ground. Keep moving to a higher final gear ratio and keep increasing wheel speed until your RPM's drop enough that turbo boost starts to fall off. Find the optimum RPM range that gives you the best combination of max torque and max boost. When you get all of that dialed in you will probably find that your wheel base is too short and it will try to flip over on its lid. Increase wheel base as needed and reduce weight everywhere possible.
OMGoodness! Monster sighting, Monster sighting! 2JZ is for real! I couldn't wait to see this video! Thank you, thank you, SXS blog, love you guys, love the channel, love 2JZ!!!!! Awesome work guys, so proud, and so happy for you all. I loved Leo's comment "I don't think I've ever been this excited!" Well boys, me neither! Matter of fact, I think it's safe to say, we "ALL" share your enthusiasm! BTW, what about a change of the front tires.....simple I know, but smooth tires don't fling sand.....ie resistance, a play with the suspension of course, and trim the monster's weight everywhere possible, but turn up the boost and let her eat!
I would mix no leaner than 50;1 with this motor. Im not familiar with stock oil injection system on the 2JZ, have you tried castor maxima 927 premixed! i use xd-100 in my rotary and detroit 8v92 2 stroke. The 2JZ can be run in multiple positions just like a sled motor! Its basically a chainsaw on steroids but i would go with motule 800 2t if i had one.
Unreal Guys!! I was starting to get impatient waiting for that video to drop but it was totally worth the wait. Love Leo’s editing style bringing the core four of you guys into the video with Doug’s tech talk balanced with the complete insanity 2JP brings. That kid will be stoked for days after witnessing that beast!! Great work Guys!!
Driving by on highway today and realized why the pond looked familiar saw the shop in background and went wow this is the McDonalds exit I use. Keep up the good work and having fun at the same time
Was watching another channel I'm subbed to (wont mention who, but you all know him/them), but immediately had to come here to watch this. You guys rock.
Im glad you guys realized what you were doing wrong near the end of the video. With those tires and sand, you need wheel speed. Think physics, the more sand you grab and throw behind you the faster you start accelerating. Cant wait to see what happens next!!!
Good Fn God! I can imagine how it feels to have the ground thumping under your feet when those buckets carve sand out and hurle it 3 states back. I think the earth rotation has changed again. Sun of a gun that thing Rips, Snorts, Sh*ts, Gits, and a bunch of other stuff I can't even think of. I think it wants to accelerate so fast your soul gets left at the line.
For the love of god, shift up! It could have gone faster if Doug would have just shifted. Smooth tires on the front and something is not right with the weight transfer from front to rear. Great first run though.
JUST START BUILDING MINE NOW, canceled the speed order! Congrats guys, you've all worked so hard on the 2JP project, epic journey with you all and it's only just begun. I just can't wait till you have it dialed in and on a prepped drag event, I can think of a couple of "big guns" lol, I'd pay money to watch you fill their cars full of sand. Fun times, keep up the great content!
From a mud racing point of view the more wheel speed the better (spin to win), in terms of tire bigger diggers are the most aggressive paddle (probably best for soft sand) but maybe think about large diameter boggers cut and scooped that's how a lot of fast rails hook up when they over power small dia tires like paddles. You guys are killing it as is, keep it up, love watching!!
"We actually need more tire"... Idk if they still do this but WAY back in the day they would double up the rear (duallys) paddles. That's your fix. Mr. Quick was the first sand rail to do this in the 70s. (edit) maybe some added weight to the front so it can get on plane faster.
What should we do next with 2JP?! Comment below..
Go to a drive through, order some more turbo!
SXSBlog.com is this twin turbo and if its not twin turbos put twins
Race Cleetus
Change the look to something more aggressive
Put drag slicks on it and take it to the drag strip
I have sand drag for years. I feel you have plenty of tire. You are in some real soft sand there. You have a 2 spd shift at a 100 ft. The higher gear will load the motor and allow the tire to hook up. Your to use to hearing you belt drive no shift SXS running up the rpm. The car you have now has big horse power shift early to load the motor and hang on don't drive it like your SXS. Your doing a great job a little more seat time and you'll be the guy's to beat. That thing is awesome I've been following the build.
Totally agree. Try short shift it into second and make it lug.
I need to shift it I agree
I'd also take some rebound out of the rear shocks as it's bouncing off the bottom and bringing the weight off the tyre
Or maybe 12 pounds on the tire pressure?
Omg goog vid
Taking some of that camber out in the rear might help with getting more surface of the tire for more traction. when it squats is cambers out even more
Big facts
i was thinkin the same thing man
When you guys get to the strip at sliver lake with the wet sand it will be a rocket with the wheels in the air. !!
Yep that it will
@@dylankumzi for what the wheels never left the ground
@@calebhoffman3784 wet sand is gonna grab harder. Most likely bringing the front end up.
@@jaden2790 yeah your right that makes sense
@@steveletson6616 makes sense
Just need them smoothies for the front now
Right imagine it not dragging a BFG 35 through the sand 😅😅😅 this thing is an animal
Came here to say this
I’d bet on picking up a tenth or two just because the front end could float better
Lightening up the front will help it transfer weight to the rear too.
It’s a 2jz and needs that weight up front with sand tires up front you’d be wheelieing and not hooking
Everyone thinks they’re fast until a 2jz swapped rzr shows up
I think a sxs might keep up in a short track
Jose David your stupid if you think that. I’m not talking about turns I just meant a straight line
@@donny-2964 read the draggy data they go.. smh power to weigh means a lot. Put 550whp on a sxs and it will keep up with that in a SHORT TRACK.
Hey fool go on the new video. Smh sxs ran just as fast as the 2jp did..
Jose David oh yeah no doubt but but it’s not that serious dude. It was just a everyone thinks there fast joke.
Leo you would fit right in on the Cleetus race team... immediately wanted to give er more timing 😂
lmao my boy, I thought the same thing lol
I can’t wait for Garret to make a pass in this thing. I’m sure it’ll happened eventually.
When Cleetus tunes, James has to get the tool box.
The 2JZ poppet valved loop charged 2 stroke! Are you running motule 800 2t?
you need some skinny and lightweight front tires that will help it get out of the hole
They dont have front wheel power on that machine since its not 4wd so i agree
I thought the same thing!
I was thinking the same thing. a good front sand tire
Yes
Definitely hitting 2nd early would bring the wheel speed up, propelling you faster
This. In sand you have wheel spin all the way through the gears, so an early shift will likely equate to faster wheel speed, spinning, to get more acceleration. I feel like the tires are 'catching up' to the gear as it's hitting the top of the gear. Unlike asphalt where you are locked in and need to rev out the rpm, here and early shift and get the wheel speed up higher. Sand and mud is all about wheel speed. Not traction so much as you would think.
Mo powa baby?? 🦅
I think it would get too squirrely
Holy Mol*y Boys! Sorry to swear Doug
Congrats gents. This thing is a freaking monster.
so insane seeing this thing run. I can only imagine how it looks in real life. Glamis this year is gonna be nuts
Unfreakin believable! The roosts that come off 2JP is incredible! Congratulations boys you made 1000++HP sand dune ripper. Epic
sick 2 stroke conversion here running motule 800 2t oil injected! Tjs motor can run in any position like a sled motor!
2 stroke poppet valved loop scavened brapp, oil injected or premixed? motule 800 2T all the way
That seemed to take Forever!!! Been unpatiently waiting to see the 2JZ build in the sand. Lol
Dudes... I remember the video you guys dropped the 2jp idea, and now this. You guys are legends!!!
I was just so excited wasn't paying attention dropped my smokes in my prostatic leg and put it on really quick man smashed my smokes lol
😂😂😂😂 yooo this is the funniest comment i have ever seen
You smashed your cigs with your nub???): I’m sorry that’s rough lol hope one survived in there for you.
Oh my 😂
😂😂 this is the comment I needed to see today
Dad?
Woke up to this on my birthday! Insane power!
The most reliable Polaris in history. Beautiful machine.
is it running the stock oil injection OMP or is it premixed, this is a pioppet valved loop chared 2 stroke so i heard they like Motule 800 2t, not sure but its dry sump and oil injected and can run in any position fro what i heard. this is what the toyota s-2 stroke loop charged 2 stroke was based off of. This mor can ru tiled at 90 degree like any outboard could with oil injection! What would happen if i do this on motule 800 2t? how dies it compare to a marine 2 stroke diesel or rotary outboard.?
@@jlo13800 it’s running a Toyota 2JZ the engine isn’t even Polaris what are you rambling about?
I got 5 quarts of Motule 800 2T for my rotary. Pricey stuff but runs good. Unfortunately my 8v92 Detroit 2 stroke and small block v8 2 stroke are to heave for a project like this. I picked up a 2jz motor and got it on amsoil dominator 2 stroke and working on a homemade oil injection system for it.
Guys take a look at the rear end when it takes off in slow motion and watch your suspension and tires lift.
Finally I’ve been waiting since you blue balled us last time lol
Biiiig blue balls last
Time
Big blue balls guy!
😂
🔵🔵
You couldn't smack the smile off my face when she lit those paddles. Unreal boys. Can't wait to see this thing on a better surface.
I totally agree with you, I have a cousin named Drew Williams. Just thought I would share that.... Lol
Bigger diggers are a taller paddle, and your rear suspension seems to “bounce” off the hit
I thought it crouched down super well like a drag car then realised in the slow-mo it was just digging out the sand lol
This was the first thing I saw, it unloads the suspension bad no tires will fix that.
Geeze, to think that was sort of the vehicle you went orienteering in last year... crazy! I have complete respect for everyone on your guys team to put this together. When this thing goes, my jaw drops! I’m so proud of all of you!!!
I've been sand racing for a 1000years!, I think your lever A is interfering with the lever Fn B. 🍺. Adjust the What-not 2 clicks,then back it down 3. Drink and be merry, and try again tomorrow.
Have fun yall!
Damn bro 1000 years? You must be very experienced
@@Kyle-dc7jm absolutely, when I started Little Sahara was just a sand bar on the Cimarron River. 😁
That's one hell of a unit! Jp definitely has the power to go....but diggin' and going are two different things. She has the power and torque, put a BIGGER tire on! Damn that things scoots!!
That thing goes from 0 to holy shit in no time flat
This build is going to boost this channel!! Its unusually things that get views and this is as far out as it gets! Wishing the best for you guys!! Thanks for amazing content!!
i was thinking you might just need to give her all the beans and let it spin. its not gonna hook on the sand anyway so might as well giver the dinner
I think with fluid surfaces, acceleration is transferred to the vehicle as long there is enough surface contact. The tires are gonna have a peak "pumping" rpm per foot and if you surpass that by X amount then you slow down. I don't know anything about it really but I assume it's similar to boat propellers. The amount of water they move should allow the engine to reach the power band and limit rpm to near peak HP.
I find with big enuff paddles sand hooks just fine
@The Weapon Collection Horsepower is king, try walking in sand vs high horsepower and huge paddles, its amazing the amount of energy it takes but with the right set up its amazing
Glad our cone donation helped out 2JP and the blog! Hope you guys had an awesome time. 🤘
Go 6" taller with rear tire size to get more paddles on the ground. Keep moving to a higher final gear ratio and keep increasing wheel speed until your RPM's drop enough that turbo boost starts to fall off. Find the optimum RPM range that gives you the best combination of max torque and max boost. When you get all of that dialed in you will probably find that your wheel base is too short and it will try to flip over on its lid. Increase wheel base as needed and reduce weight everywhere possible.
Max Power
@z i mean its already been increased a bunch so yeah
What a ripper so cool and an awesome first run with no faults
Hell yeah brother, heck yeah dude, this is the moment, months of watching and waiting for this moment I can’t wait to see this.
YOU GUYS ARE SENDING IT !!!! put a full send flag !! LOVIN THE CONTENT SINCE DAY 1 PROUD OF WHAT YOU GUYS ACCOMPLISHED ! Keep ripping !!!
Got to be one of the coolest slow-mo 👍🇺🇸
I could watch that car run all day and not get tired of it.. Great job on the build..
This is the best thing that's been on this channel in a while.
Big smoke guy here, as always love the video and Supa A+ Quality
By far, the craziest build I have ever seen!! Man I’d love to have a blast in your sxs’s 😜👌🏼 Dedicated viewer from New Zealand 🇳🇿
OMGoodness! Monster sighting, Monster sighting! 2JZ is for real! I couldn't wait to see this video! Thank you, thank you, SXS blog, love you guys, love the channel, love 2JZ!!!!! Awesome work guys, so proud, and so happy for you all. I loved Leo's comment "I don't think I've ever been this excited!" Well boys, me neither! Matter of fact, I think it's safe to say, we "ALL" share your enthusiasm!
BTW, what about a change of the front tires.....simple I know, but smooth tires don't fling sand.....ie resistance, a play with the suspension of course, and trim the monster's weight everywhere possible, but turn up the boost and let her eat!
Love the Jurassic Park livery. Can’t get enough of 2JZ noise. I love it guys. Great work.
Finally a Polaris that doesn’t suck!!. “Psa my comment is All in good fun”
Lol frfr AaaaaaaaaaaaaaaaahahahahaaaaaaaaAaaaaaa!hahahahahahahaha lol
With help from Toyota GM Ford .
Who knew that if you just swap everything but the name plate, it’s a beast... lol
But wait still no Can Am parts correct? That’s why it’s a beast.
I would mix no leaner than 50;1 with this motor. Im not familiar with stock oil injection system on the 2JZ, have you tried castor maxima 927 premixed! i use xd-100 in my rotary and detroit 8v92 2 stroke. The 2JZ can be run in multiple positions just like a sled motor! Its basically a chainsaw on steroids but i would go with motule 800 2t if i had one.
Unreal Guys!! I was starting to get impatient waiting for that video to drop but it was totally worth the wait. Love Leo’s editing style bringing the core four of you guys into the video with Doug’s tech talk balanced with the complete insanity 2JP brings. That kid will be stoked for days after witnessing that beast!!
Great work Guys!!
Put dune tires on front, tighten rear, and spin them at the highest mph you can muster! Shift gears
damn right, well said.
Doug always so humble i love the energy on this chanel ! Thank YOU GUYS
5:30 she GETS!!! 10:30 she REALLY GETS!! da gon rocket ship man i tell you what
Glad you guys and cleetus got together otherwise I may have missed out on this amazing channel !! Great content sxsblog!!!!
Things gonna be walking everyone on the groomed SLSD surface
Try the drag banshees. That will be a race. Those banshees have a shot at it.
Also shifting will help lol
@@jaden2790 no they don't lol
@@tiddiesprinkles Its a powerglide lol
@@lakaiskates8064 its still has more gear though lol
so proud of you guys great job sxs blog.
The little kids reaction is priceless! 👍🏻😂
It just looks so violent with the rear facing camera. Well done Dougie!
I’ve been waiting for this forever love the work!
I CANNOT WAIT for the vid of 2jp at the dragstrip at silver lake taking on those v8 buggies. Now that is what I wanna see!
The UA-cam video of the year!!!!
Man I can’t get enough of your content, this build will make you guys huge worldwide. You deserve it!
Doug is a BIG HP guy! 😂👍
Driving by on highway today and realized why the pond looked familiar saw the shop in background and went wow this is the McDonalds exit I use. Keep up the good work and having fun at the same time
I'd love to see that thing with some drag radials and you guys make a hit on a drag strip🤙🤙
It would flip.
@@Skwisgar2322 wheelie bar
@@Skwisgar2322 thats what wheelie bars are for...
Love that you kept the original Exploder wheels on it!
Wheel speed is your best friend in the sand with high hp
Was watching another channel I'm subbed to (wont mention who, but you all know him/them), but immediately had to come here to watch this.
You guys rock.
WHOO HOO!! FINALLY 2JP SAND VIJAYO!😊
Im glad you guys realized what you were doing wrong near the end of the video. With those tires and sand, you need wheel speed. Think physics, the more sand you grab and throw behind you the faster you start accelerating. Cant wait to see what happens next!!!
Great video, in dry sand your gonna spin a lot the more wheel speed the harder it will pull grab second gear and let er eat.
You guys did NOT disappoint.!!! Sooo good. When are you going to JUMP it?????
Big "who's to say" guy 😀
Been waiting for 8 months for this moment........ now go race leroy....!!!!!!!!
It needs racing wheels and tires on the front the old bfs are too heavy awesome car though!!
Really pleased for you guys all the hard work paying off looks awesome from here in the uk
You guys should do race week in the 2jp
this is amazing! little sahara is where i go to rip. i saw the 2jp absolutely ripping at utv takeover. it was an amazing experience
Rear suspension needs to have less rebound. More sag. From the outside I can't feel it first hand.
Agreed. it is bouncing up off the hit and not hooking again until the weight transfer from the momentum hits the rear tires
I love that I live with yall in this big ole beautiful country, but dang yall sound Canadian to me! Love you too!
Good Fn God! I can imagine how it feels to have the ground thumping under your feet when those buckets carve sand out and hurle it 3 states back. I think the earth rotation has changed again. Sun of a gun that thing Rips, Snorts, Sh*ts, Gits, and a bunch of other stuff I can't even think of. I think it wants to accelerate so fast your soul gets left at the line.
Next thing you know they will blame global warming on this thing!
That thing is freeking insane.Love it.
Let's see that thing hit 2nd gear boys
I have watched you guys build this awesome machine since day one it was so bad ass to see it rip on the sand finally thanks
Suprised he didint say "big paddle guy in the intro"
WoW this is just great to see this thing run like a monster in the sand.
my god that thing is a monster, cant imagine what its like behind that wheel
I'd drive it...
You guys make you tube a better place this thing is a fucking mazing. The best part is watching you guys grow as not only a channel but as people. ❤️
It’s time I’ve been waiting for a year let’s go 🤩🤩🤩🤩
Best UA-cam channel period!
Take it to the beach. You'll find that traction you're looking for.
And it would be exposed to saltwater so it would rust out badly.
Hell yeah!!! Great to finally see it on the sand!!
For the love of god, shift up! It could have gone faster if Doug would have just shifted. Smooth tires on the front and something is not right with the weight transfer from front to rear. Great first run though.
Thank you for a project completed and tested. It’s a beast!
The fact that this thing will be under 2 seconds to 60 in the sand is literally insane lmfao 🤣🤣🤣
JUST START BUILDING MINE NOW, canceled the speed order! Congrats guys, you've all worked so hard on the 2JP project, epic journey with you all and it's only just begun. I just can't wait till you have it dialed in and on a prepped drag event, I can think of a couple of "big guns" lol, I'd pay money to watch you fill their cars full of sand. Fun times, keep up the great content!
Hey. Lighter front tires & wheels
It's good to see the sand cannon out there blasting some sand into outer space.
There’s that freakin four digit rzr 😏
Those tires are nuts!
And this thing is a BEAST!!!
Great work boys as usual!
Shift to 2nd but yes tires what you need
Its about time i have been waiting for this what seems like for ever i know you guys have as well thank you
Oh this made my day 😂
From a mud racing point of view the more wheel speed the better (spin to win), in terms of tire bigger diggers are the most aggressive paddle (probably best for soft sand) but maybe think about large diameter boggers cut and scooped that's how a lot of fast rails hook up when they over power small dia tires like paddles. You guys are killing it as is, keep it up, love watching!!
"We actually need more tire"... Idk if they still do this but WAY back in the day they would double up the rear (duallys) paddles. That's your fix. Mr. Quick was the first sand rail to do this in the 70s. (edit) maybe some added weight to the front so it can get on plane faster.
That would be crazy heavy
RIP axles
Very cool glad y'all chose LS gonna be out there this weekend lotta folks going
Damn yall should have put the other set of paddles on the front🤣
Why
@@ytcoleman more traction
dillaboo19947 it’s rear wheel drive only
@Big Crunch yall are 100% right i wasnt paying attention thought it was 4x4
This is amazing! You guys are doing things dreams are made of! Rocky mountain is the sh*t!!!