I did the same thing to clean the nozzles but after the cleaning process there are no more colors. The test print has become very bad. I spoke to a technician on the phone and sent him videos of what it looks like. He says that the print head has to be replaced because it is defective . can you possibly help?
I did some pressure but only got some drops, not a vertical rain, I am afraid of breaking if I apply more pressure, how much resistance should I expect when pressing?
if you have a capping, suck down from the capping tube. (capping take out to seal up nozzles). so the pressure is more evenly. for press strength, is difficult to tell.
I want to ask,, I did flushing on the yellow nozzle pole but why did the cleaner liquid come out on the black nozzle and can it still be fixed, I used an Epson L1800 printer.
@@artland1076 it depends on your DX5 Type. if the model is the golden surface model which both works for oil base ink and water base ink. and printer used solvent ink, then you can use solvent cleanser. but if you used water base ink. then you can not use a solvent cleanser
My dx 7 just leaks /drips ..short clean works perfectly ..after 1 print , leaks and drips white ink
I did the same thing to clean the nozzles but after the cleaning process there are no more colors. The test print has become very bad. I spoke to a technician on the phone and sent him videos of what it looks like. He says that the print head has to be replaced because it is defective . can you possibly help?
I did some pressure but only got some drops, not a vertical rain,
I am afraid of breaking if I apply more pressure, how much resistance should I expect when pressing?
if you have a capping, suck down from the capping tube. (capping take out to seal up nozzles). so the pressure is more evenly. for press strength, is difficult to tell.
I want to ask,, I did flushing on the yellow nozzle pole but why did the cleaner liquid come out on the black nozzle and can it still be fixed, I used an Epson L1800 printer.
Nozzles are perforated. not possible to be fixed
I flush on my 4 white nozzle but liquid not come from head... what we do
White at a time 4 nozzle not pri ti ng
after cleaning, there's motion of flash jet. if no inks from fash jet. the head is dead. change new printhead
may i do clean ownly?
what's this question about? do you not sure about how to do?
Which liquid do you use?
there's a clean flush, especially for Epson head.
when you don't have clean flush, you can use distilled water as well. for water-based ink used head.
For eco solvent Dx5 which cleaning materials i can use
@@UniPrintcn can we use solvent to clean Dx5 head?
@@artland1076 it depends on your DX5 Type. if the model is the golden surface model which both works for oil base ink and water base ink. and printer used solvent ink, then you can use solvent cleanser. but if you used water base ink. then you can not use a solvent cleanser