How to Update a Jailbroken Nintendo Switch - latest Firmware Ver. 19.0.0

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 171

  • @JonnyTroche
    @JonnyTroche  7 місяців тому +9

    JITS Alternate Link: sigmapatches.su/
    *Incorrect fusee version FIX*: Go back to the Atmosphere page and download the Fusse.bin file under the latest Atmosphere. Place that on your sd card in Bootloader/Payloads/
    ◉ Discord: discord.gg/cvPDdrdUxz
    ◉ Twitter (X): twitter.com/jonnytrochejr
    ◉ TikTok: www.tiktok.com/@jonnytroche
    ◉ Twitch: www.twitch.tv/jonnytrochejr

    • @LGND_PAYAKAROON
      @LGND_PAYAKAROON 6 місяців тому

      never mind about that i figured it out for some reason the new fuse bin wasnt replacing the older one so it had 2 bin files basically but for some reason the switch was showing the older one so i basically went back and deleted the older fuse bin and copied over the new one and that worked for me

  • @stuckinabucket6873
    @stuckinabucket6873 7 місяців тому +4

    Thank you my man!
    You just saved me from having to restart my 35 hour save on unicorn overlord.

  • @GJKiller-uk4vp
    @GJKiller-uk4vp 2 місяці тому

    Haven't done switch modding in a while, you tutorial is very straight forward and simple. Thank you!

  • @maximerenard8524
    @maximerenard8524 6 місяців тому +1

    I love you so much, my switch was stuck with error HOS, and your video helped me a lot, thank you so much !! 18.0.0 / 1.7.0E

  • @julie2452
    @julie2452 5 місяців тому

    Thank you! Absolute life saver. You make updating so painless.

  • @YoungWill163rd
    @YoungWill163rd 8 днів тому

    This video finally helped me out thanks so much!!! definitely works for update 19.00

  • @kansai555
    @kansai555 6 місяців тому

    i dont usually leaves comments, but god damn!!! all works brother!!! thank you for saving me :)

  • @LuoQiin
    @LuoQiin 6 місяців тому +1

    Perfect as usual!!

  • @LGND_PAYAKAROON
    @LGND_PAYAKAROON 6 місяців тому +4

    @JonnyTroche i did everything has you said hekate booted perfectly showing its v6.1.1 but when booting the payload fuse it just goes to a blackscreen no error code or message just a black screen and i did download the latest fuse along with atmosphere as you said putting it in the payloads folder. but in this whole process i didnt do the jits and yes i did have the older aio file downloaded but the reason i skipped the jits part cause jits is no longer running it just brings you to a 404 error code could this part of the issue of why its not running if so where could i download a aio?

  • @tyresr
    @tyresr 7 місяців тому +12

    I’m just gonna wait until 17.0.1 cant play games any more

    • @JonnyTroche
      @JonnyTroche  7 місяців тому +1

      What errors are you getting

    • @tyresr
      @tyresr 7 місяців тому +4

      @@JonnyTroche Oh no I’m saying that I’m gonna stick to 17.0.1 until new games require 18.0.0 lol. I haven’t actually updated

    • @real.jepzryo
      @real.jepzryo 7 місяців тому +5

      Same here . I will just update if new game require this update .

    • @Yo_Naseem
      @Yo_Naseem 6 місяців тому +1

      Facts

    • @TrayGaming_Reactions
      @TrayGaming_Reactions 6 місяців тому

      ​@@tyresryou mean to tell me you can't install new games if you're on a different version I was hoping that wasn't the case😬

  • @fornogg
    @fornogg 6 місяців тому +2

    Hey, thanks for the tutorial. I'm a little stuck. I had it on cfw before but my friends updated the ofw to 18.0.0 when we were at a cottage together. I followed everything you said and I just can't seem to boot into RCM at all. I even bought a new jig and when I hold volume up and press power, it just boots the switch normally. Do you have any ideas that might get me started?

  • @TREBOMB1980
    @TREBOMB1980 7 місяців тому +2

    Can i just use the all in one updater on the switch? And then ill just manually install the sig patches? Or does the updater not have the latest stuff yet?

    • @JonnyTroche
      @JonnyTroche  7 місяців тому +2

      Not sure if it will but you can check. It's Atmosphere 17.0.

  • @Future-Gamers
    @Future-Gamers 6 місяців тому +3

    In fact, I followed all the steps that I did and the device worked well. However, there is a problem with installing the games, as it does not work after installing it, and the games that were previously installed before updating the framwere to the last update 18 system are no longer working either. I deleted the games and reinstalled them, but they still do not work. I hope that Learn a video explaining how to install games in the correct way after the update so that they work correctly. I am suffering from a real problem, my friend, and I need your help.

  • @vortex_dynamix
    @vortex_dynamix 7 місяців тому +4

    My atmosphere keeps booting up to version 17.0.0 even after installing the recent firmware and files

    • @JonnyTroche
      @JonnyTroche  7 місяців тому

      That's the newest though?

    • @JinxTheCat2552
      @JinxTheCat2552 7 місяців тому +1

      @@JonnyTrocheyou didn't explain how it will change to 18 if we change the files? do we go on our system update then go in to emu partthen it would change is that it?

    • @JonnyTroche
      @JonnyTroche  7 місяців тому +1

      Updating your firmware on Emunand is a completely different thing. This video is to update atmosphere to version 17 which supports firmware v18. You don't have to update. This is just for people who did that are on a older version of atmosphere.

  • @sonnypvristoo4984
    @sonnypvristoo4984 3 місяці тому

    Thanks man! You helped me a lot! I started reusing my unpatched version after a long time! I only have one problem tho: it doesn’t let me use tinfoil😅 I can use all the games I downloaded before with no problem but when I try to open tinfoil it says that there’s corrupted data, and when I press “check” to see if I can restore, it says that I need to install tinfoil again, and when I try it doesn’t let me and gives an error. Do you have any advices?

  • @RADMikkoo
    @RADMikkoo 2 місяці тому

    Sir can i ask something? I accidentally updated my OFW to 18.1 . I cant open my CFW anymore. Whenever i restart my switch the cfw button is not there anymore. Can you teach me how to update?

  • @PADILLA950
    @PADILLA950 6 місяців тому

    What about 90dns or exosphere? I have also heard about incognito? Can you do a video on those?

  • @cyberslasho8
    @cyberslasho8 5 місяців тому +1

    Quick question:
    Instead of taking the SD card out of the switch, can I just use the SD tools in the hekate menu? Or do I have to fully turn off my switch?

    • @PLiVX
      @PLiVX 3 місяці тому

      ofc you can

  • @keepitshort4208
    @keepitshort4208 2 місяці тому

    I had a question: If i transfer games from pc to switch by making a game folder on the main root of SD card, do i need to keep the game file ? I just dont want to make a copy of the game
    Also, what is the best way to install updates and dlcs ? Sorry for the bother. I'm just kinda confused to be honest.

  • @iNoFeaR93
    @iNoFeaR93 Місяць тому

    Is it necessary to redownload the files? I have all the files but when I delete them of my sd card en just put the Jits files back and then tegrarcmgui inject the bin it gives me the error again. Or do you have to redownload the files?

  • @deimos6809
    @deimos6809 2 місяці тому +1

    great video

  • @Brikzilla
    @Brikzilla 20 днів тому +1

    Accidently updated my switch to 19.0.0 after installing the microsd, can no longer jailbreak mine now till atmosphere updates 😭😭

    • @JonnyTroche
      @JonnyTroche  20 днів тому +1

      Hopefully a update this week

    • @Brikzilla
      @Brikzilla 20 днів тому

      @@JonnyTroche look forward to it!

  • @dhioferhan8145
    @dhioferhan8145 5 днів тому

    I still havent understood the RCM part, and can this also be done with a switch lite? I got the CFW but accidentally updated it to 19.0.0 on the OFW, please help me on finding out how I can still boot up on RCM. Thanks

    • @JonnyTroche
      @JonnyTroche  5 днів тому

      How do you have CFW without knowing what RCM is? Recovery mode, the state you put the switch in when you inject the payload.

  • @iiTCTV
    @iiTCTV 7 місяців тому +1

    just modded for the first time does tinfoil need to be updated as well to get the free shop? libera or the other tech shop isnt working

    • @JonnyTroche
      @JonnyTroche  7 місяців тому +1

      Tinfoil doesn't need to be updated

  • @jvdg_hanna
    @jvdg_hanna 3 місяці тому

    maybe a bit of a noob question but can I update my sysnand ofw normally through the settings after doing this without a risk of getting banned or bricking it?

    • @JonnyTroche
      @JonnyTroche  3 місяці тому

      All depends on what your doing with the switch. If your using a emunand then updating the sysnand is safe.

  • @8gohl
    @8gohl 7 місяців тому +1

    i got an error saying, "a fatal error occurred when running atmosphere" i did everything right, i am also able to boot into hekate but when i run the payload of fusee (the new version) i just get that error. I am also able to boot into the regular switch menu with the sd card still in it. just no mods or homebrew in.

    • @JonnyTroche
      @JonnyTroche  7 місяців тому

      Check the pinned comment

    • @8gohl
      @8gohl 7 місяців тому

      Ok​@@JonnyTroche

  • @Xyzxyzxyzabc6
    @Xyzxyzxyzabc6 6 місяців тому

    Thank you really much!

  • @wingular6600
    @wingular6600 6 місяців тому +2

    Is there a way to jailbreak a switch through the consoles Web browser yet?

  • @Chris-vm3ym
    @Chris-vm3ym 5 місяців тому

    I know its a month old but thought id ask. I followed your other guide for 18.01 and one vid doing with a piece of tinfoil. I did this 2 weeks ago It worked great. I set it in the setting to not need the rcm jig.
    Today i thought id add a game and pluged it into my computer. I got the ok sign my unit was on. I thought id just restart it first before adding a game. Now it wont come back on and im not getting the ok sign.
    Also since i set it to not need rcm jig i dont even know if its powering up. Any suggestions on how to fix this issue would be appreciated.

    • @JonnyTroche
      @JonnyTroche  5 місяців тому

      This is the reason why I don't use Auto RCM. I would recommend plugging the switch into a charger directly. Not a dock. Wait 10 seconds then hold power for 20 seconds. Then leave it plugged in for 10 minutes. Then try again with your computer. Switch might be dead but there's no way to tell. You can also try another wire and or USB port.

  • @ronderev
    @ronderev 5 місяців тому

    I just bought a jailbreaked switch lite, how would I know if the past owner used JITS to jailbreak his device? I can't contact him anymore.

  • @MiekeleRossi
    @MiekeleRossi 6 місяців тому +1

    “a fatal error occured when running fusée.
    invalid GPT signature”
    what should i do??? i’m going crazy please help me🙏

  • @MarceThePunk
    @MarceThePunk 5 місяців тому

    Hey, I went through all the steps from the previous and this one and nothing happens after injecting payload with Tegra... Just blackscreen and Hekate is not booting

  • @JulieFaith-mt7wz
    @JulieFaith-mt7wz 5 місяців тому

    In your other video, you said if I reboot or power off the Switch, I have to push the payload back again. What does that mean?

    • @iNoFeaR93
      @iNoFeaR93 Місяць тому

      Just use the rcm Jigg and hold power/ volume + and its loads your Hekate. Or you can do it with tegrarcmgui and inject the Hekate bin and this works as well

  • @dualcooper4159
    @dualcooper4159 7 місяців тому +1

    Will this update for homebrewing the switch on 18.0. When I homebrew my switch It freezes when injecting. I wasn’t able to homebrew my switch on 17.0 before I updated to 18.0 and now I can’t homebrew

    • @JonnyTroche
      @JonnyTroche  7 місяців тому +1

      This update is for 18.0

  • @TREBOMB1980
    @TREBOMB1980 7 місяців тому +1

    Ok well I downloaded the files and installed them but now it says " no main boot entries" when it loads into hekate. What file is it missing?

    • @JonnyTroche
      @JonnyTroche  7 місяців тому +1

      nh-server.github.io/switch-guide/user_guide/sysnand/sd_preparation/
      Go to this site and download "The hekate config file: hekate_ipl.ini"
      Place that file in your bootloader folder. Check again if you have that problem.

    • @TREBOMB1980
      @TREBOMB1980 7 місяців тому +2

      @JonnyTroche I figured it out. I'm a dummy lol I forgot to install the new copy of fusee into the bootloader payloads folder. It's all good now!

  • @shamarrose127
    @shamarrose127 3 місяці тому

    hey johnny i recently had 1.6.2 and tried following your video... now my switch wont turn on.... could you please help me

  • @teydenpearl2447
    @teydenpearl2447 6 місяців тому

    So this might be a silly question. I have the 29GB partition made on a 128GB SD card and everything is on the 29GB partition and nothing is on the other 89GB. How do I use the other partition for storage? or what can I move to the larger partition?

  • @PADILLA950
    @PADILLA950 6 місяців тому

    Do I need to disconnect from the internet or airplane mode before hacking? Then do it then run the 90dns thing, still offline? THEN I can get back on wifizzle?

  • @alejandrocambra2502
    @alejandrocambra2502 7 місяців тому +1

    i got the yellow screen how can i make sure my sd is seated properly? ive tried several times and cant figure it out

    • @JonnyTroche
      @JonnyTroche  7 місяців тому +1

      I had to take it out and place it back in 3 times before it read. Also make sure the pins on the sd card are clean.

    • @alejandrocambra2502
      @alejandrocambra2502 7 місяців тому +1

      @@JonnyTroche ive done it several times it doesnt work, how can i make sure its clean?

  • @MrJohecker
    @MrJohecker 7 місяців тому

    I really fcked up. I wanted to Jailbreak my Switch and did a Hardreset in that process bc i threw in some wrong programms. Did that with Haku33 Like in your Video. After that the NintendoLogo shows for 3 seconds and i get a blackscreen after. Happens over and over again if i try to restart it. already loaded in the newest sigpatch. Didnt helped. Any Ideas?

  • @rigoutz6870
    @rigoutz6870 7 місяців тому

    I havent jailbroken my unpatched switch yet. I got the jig. I was going to this week then saw fw 18 came out. Can i update my switch to newest fw before jailbreaking?

    • @JonnyTroche
      @JonnyTroche  7 місяців тому

      There was a update to the files so yes you can update to v18 if you want. No need to really thought.

  • @safin_playz9690
    @safin_playz9690 6 днів тому

    what should i do if my rcm tegra stops responding when i click inject

  • @adrianbeltran-uj6qt
    @adrianbeltran-uj6qt 7 місяців тому +1

    I'm trying to play my games that I had install but it said (unable to start software. return to the home menu and try again).

    • @thump3r
      @thump3r 6 місяців тому

      You need to update your sigpatches then they will run again.

  • @Betterwalsh
    @Betterwalsh 7 місяців тому +1

    "a fatal error occurred when running fusee. unable to identify package1!" is the message I got.

    • @JonnyTroche
      @JonnyTroche  7 місяців тому +1

      *Problem:* "A fatal error occurred when running Fusée. Incorrect fusee version!" *
      **FIX:** Download the latest **fusse.bin** from here: github.com/Atmosphere-NX/Atmosphere/releases
      Place that on your sd card in Sd/Bootloader/Payloads/

  • @ChrisChase-uo6uz
    @ChrisChase-uo6uz 7 місяців тому

    do i have to power off switch to put fusee.bin in bootloader folder and does that mean i have to inject payload again?

  • @tritonb9139
    @tritonb9139 6 місяців тому

    Dose your modding switch video for 18.0.1v works on older versions of the switch my is 14.1.1v

  • @itsjaby3403
    @itsjaby3403 6 місяців тому

    Wat if I bricked it like a year or 2 ago and I want to unbrick it but I don't remember what version it was will I have to get the newest version or am I going to have to download all of them until I find the right one

  • @SonicKidXD
    @SonicKidXD 2 місяці тому

    I’ve updated my switch to 18.1.0 and installed everything that is required to update it now I can’t open some of my games it’s saying the software close due to an error what’s the fix?

  • @franckrossi9726
    @franckrossi9726 6 місяців тому

    thank you for all . i have the update 17.0.1 on my switch ; will it work with the firmware 18.0.0

  • @Christiansmoviesnow
    @Christiansmoviesnow 11 днів тому

    is it safe to update from 18.00 to 19.00 on switch while its modded or not?

    • @JonnyTroche
      @JonnyTroche  11 днів тому

      No reason to. Best stay on 18 until you have to go to 19.

  • @djjdkdjf
    @djjdkdjf 4 місяці тому

    you can do all of this in android right? if you don't need rcm mine is jb oled

  • @johnlawrence5819
    @johnlawrence5819 5 місяців тому

    So just tried updating to 18.0.1 and after a bunch of errors I did eventually get my switch to boot with everything* ill explain the star in a bit!
    Firstly let me just say that i didn't kno I had to go into the normal firmware of switch and update it lol id only updated the cfw I guess so it wasn't working. I updated it after booting this way through hekate which thankfully worked. That didn't solve my issue..
    Secondly I had my switch previously in auto rcm mode thinking wtf do I need an rcm jig for its in auto rcm... well I guess when u update the switchs actual firmware it corrects auto rcm meaning I needed a jig..
    So I drove from my friends place back home to get my jig cuz wtf didn't I have it for my jailbroken switch 🤦.
    Anyways got back inserted the jig and continued..
    3rdly I had no idea I had to remove my custom stuff b4 attempting this lol luckily it was as simple as removing a few folders in Atmosphere/contents. Thank you switch modding reddit community for all the help glad to see im not alone in these problems lol
    Anyways finally after all this and following the video above I got my switch to turn back on with my cfw with everything* ill explain the star now!!! By everything I mean everything that ud expect such as games installed and working! All saves still there everything seems right! Only thing missing was my custom stuff from my custom firmware. Also mission control messed up on me so I had to update this through hekate and then my ps4 controller started working again! Thank God it was accessible throu applet mode cuz I didn't have my joycons!!!
    Hope this helps anyone 🙂!

  • @Dante-ub5lb
    @Dante-ub5lb 4 місяці тому +1

    its telling me panic occurred wile running atmosphere and a title id numer
    help

  • @acegreen7231
    @acegreen7231 3 місяці тому

    im having trouble no RCM device detected , followed every step. does anyone have any idea how to fix this.

  • @createspaceone
    @createspaceone 5 місяців тому

    i am getting 2160-8007, i forgot to put 90dns block on. what do i do or is it banned?

  • @fordein3605
    @fordein3605 6 місяців тому

    I updated to 18, but give me error after 10 sec when launch swith even when use ofw 18 ! but all happend when try to connect internet but when use fly mode everything is fine! how fix that?

    • @JonnyTroche
      @JonnyTroche  6 місяців тому

      Did you update atmosphere?

  • @JoshAdeoye-mz3wg
    @JoshAdeoye-mz3wg 6 місяців тому

    Thank you so much

  • @ADAMMAGIC39
    @ADAMMAGIC39 4 місяці тому

    Can you use this method to Jailbreak a region free Switch?

  • @lostfrequency09
    @lostfrequency09 6 місяців тому

    what is AIO on jits , never heard of it.

  • @gamerfox____
    @gamerfox____ 6 місяців тому

    5:27 i did every step and hit payload and fusee.bin atmosphere and gave me A fatal occurred when running Atmosphere :c again
    got some updates i got it working :D on my 12th Attempt

  • @acewhotalks4487
    @acewhotalks4487 3 місяці тому

    Updated my firmwares and all that, but my games can't boot up, they send me back to the home menu with the same errore message

    • @mrflopa3684
      @mrflopa3684 25 днів тому +1

      I exactly have the same error rn did you find a solution if so can you please tell how did you do it ?

  • @Dabbingtonsir
    @Dabbingtonsir 4 місяці тому

    Can you show me how to update my switch with my android or without a computer please please please

  • @OmniOmar2
    @OmniOmar2 5 місяців тому

    when I boot fuse bin I get Failed to run tsec_keygen firmware any fix?

  • @Snake-b7x
    @Snake-b7x 6 місяців тому

    How to run switch in rcm?i've got it already modified through the chip

  • @westernllamas
    @westernllamas 6 днів тому

    I can’t inject payload. No matter what I do it’s greyed out

    • @JonnyTroche
      @JonnyTroche  6 днів тому

      Install drivers. Are you in recovery mode?

  • @carlosramos4013
    @carlosramos4013 7 місяців тому +2

    Can i use usd flash drives

    • @JonnyTroche
      @JonnyTroche  7 місяців тому +1

      has to be a micro sd card

  • @NoahOnline69
    @NoahOnline69 6 місяців тому

    I did the update and now I get an error as soon as my switch connects to internet. Is there a fix to this?

    • @NoahOnline69
      @NoahOnline69 6 місяців тому

      Also I cant even start up any games. It says "unable try again". Also the error code I get when I connect to the internet is 2123-0011.

    • @NoahOnline69
      @NoahOnline69 6 місяців тому +1

      UPDATE: I ended up having to block servers using 90dns and update the sig patches. They were easy fixes but I still felt they should have been mentioned in this video.

    • @IGRPoseidon
      @IGRPoseidon 6 місяців тому

      @@NoahOnline69 I had this same issue and as soon as I updated SIG patches it was perfectly fine.

  • @Th3ProGamer
    @Th3ProGamer 6 місяців тому +1

    Please, how can I update my modded PicoFly/Hwfly Nintendo Switch?

  • @Filip-xk6of
    @Filip-xk6of 7 місяців тому +1

    Can I use tinfoil normally after updating?

    • @JonnyTroche
      @JonnyTroche  7 місяців тому +2

      Yes. No need to update tinfoil

  • @TurboV8boi
    @TurboV8boi 3 місяці тому

    Mine boots after the update but I'm getting a message saying that my games are corrupted lol

  • @sadeka8131
    @sadeka8131 7 місяців тому +1

    How to FIX Panic occurred while running atmosphere

    • @JonnyTroche
      @JonnyTroche  7 місяців тому +1

      I need the full error code.

    • @sadeka8131
      @sadeka8131 7 місяців тому

      @@JonnyTroche
      i found a solution
      its just delete contents folder in atmosphere/

  • @suke6432
    @suke6432 6 місяців тому

    Is this still dependent on my serial number?

  • @mohandmohand2047
    @mohandmohand2047 12 днів тому

    Emummc??? 18.1.0 cfw the ofw 19.0.0 how fix error.

  • @Brian.lol446
    @Brian.lol446 3 місяці тому

    JITS site not working? What do I do

  • @vorz9994
    @vorz9994 7 місяців тому +2

    the jit site is not working for me for sum reason?

    • @Alexiisanxhez
      @Alexiisanxhez 7 місяців тому

      Same for me.

    • @JonnyTroche
      @JonnyTroche  7 місяців тому

      Working for me. Might have been due to traffic to the site. Try again.

    • @JonnyTroche
      @JonnyTroche  7 місяців тому

      Working for me. Might have been due to traffic to the site. Try again.

    • @oscardaniel755
      @oscardaniel755 7 місяців тому

      Currently not working sure down??

    • @JonnyTroche
      @JonnyTroche  7 місяців тому

      Just tested and works for me jits.site/

  • @100manslayer6
    @100manslayer6 5 місяців тому

    I just cope file Atmosphère by replace and working, thx.

  • @karimhabashy9087
    @karimhabashy9087 Місяць тому

    i dont understand the TegraRcmGUI

  • @xanderzavier3095
    @xanderzavier3095 6 місяців тому

    I have new switch,and new patch,is it work on my switch?

  • @ninx003
    @ninx003 2 місяці тому

    Am not seeing the games i had on my sd ?

  • @PADILLA950
    @PADILLA950 6 місяців тому

    with this tutorial i can mod my 18.0.1 and download games straight from tinfoil? can you make a video about how to get games thru tinfoil?

  • @hamzaattia-h3h
    @hamzaattia-h3h 6 місяців тому

    I want a video how to jailbreak Nintendo switch oled in firmware 17.0.1

    • @JonnyTroche
      @JonnyTroche  6 місяців тому

      Requires a mod chip to do that. Thats a whole other process.

  • @AyaanShams-qj4pm
    @AyaanShams-qj4pm 2 місяці тому

    I have 1.18.1 what should i do

  • @Nimble.
    @Nimble. 6 місяців тому

    I can’t find the .bin file in the hekuda file

  • @X0t1cRag3
    @X0t1cRag3 6 місяців тому

    jits is not working for me

  • @hamzaattia-h3h
    @hamzaattia-h3h 6 місяців тому

    My Nintendo switch firmware is 17.0.1 can I jailbreak it

  • @edwinrosario8533
    @edwinrosario8533 7 місяців тому +2

    WHAT IS JITS

    • @JonnyTroche
      @JonnyTroche  7 місяців тому +1

      A all in one that has a few added things that gets you up and running quick.

  • @ianvaca6386
    @ianvaca6386 7 місяців тому +1

    It just tells me incrrect fusee version

    • @JonnyTroche
      @JonnyTroche  7 місяців тому +3

      Go back to the Atmosphere page and download the Fusse.bin file under the latest Atmosphere. Place that on your sd card in Bootloader/Payloads/

  • @zappy33
    @zappy33 6 місяців тому

    jits site doesnt work it gives 404 error

    • @JonnyTroche
      @JonnyTroche  6 місяців тому +1

      alt links in description

  • @mikemods9455
    @mikemods9455 6 місяців тому

    its still saying im on 16.0.3

  • @umokbye6970
    @umokbye6970 6 місяців тому

    does this work on macbook

    • @JonnyTroche
      @JonnyTroche  6 місяців тому +1

      I believe there is a Mac app for TegraRCM.

  • @markreyes3673
    @markreyes3673 7 місяців тому

    Can you show me version become 18.0

  • @cat.2558
    @cat.2558 6 місяців тому

    how the hell do you boot to rcm?

    • @JonnyTroche
      @JonnyTroche  6 місяців тому

      This is a update guide not a Jailbrake guide.

  • @Marmaralone
    @Marmaralone 6 місяців тому

    Anyone tried Hekate with 18.0.1? Does it work?

  • @EvanfelipeAgudelogallego
    @EvanfelipeAgudelogallego 6 місяців тому

    Bro, im searching piclofly witch chip, and this is what i get? fck

  • @kipanilee4267
    @kipanilee4267 6 місяців тому

    Help me T-T

  • @kipanilee4267
    @kipanilee4267 6 місяців тому

    JK!

  • @mohammadanaskhan7846
    @mohammadanaskhan7846 4 місяці тому

    mine is nintendo switch oled and bymistakenly my system is updated to the newer version to 18.1.0 i dont know what is jits now i want a clear guidance please help how i need to replace all new files in the sd card