How to Jailbreak Nintendo Switch 18.1.0 // Atmosphere 1.7.1 Hekate 6.2.1 Tinfoil 18 // BEST GUIDE
Вставка
- Опубліковано 11 січ 2025
- #switch #nintendoswitch #atmosphere #hekate #switchjailbreak
/ @idx3tutorials
‼️Special benefits for supporters. I can guide you through a tutorial,
help with troubleshooting, hb applications and much more!
For more information, contact me on IG!
Donations:
buymeacoffee.c...
Jailbreak tutorials:
-Unpatched jailbreak • [Unpatched] How to Jai...
-Unpatched update • [Unpatched] How to Upd...
-ModChip Jailbreak • [ModChip] How to Jailb...
-ModChip Update • [ModChip] How to Updat...
🔥 Thank you for watching! Subscribe and hit the notification bell!
Attention! This tutorial is for Unpatched Nintendo Switch V1.
For other Switch consoles, you must have a modchip installed.
Before the process, check the status of your switch on this site: ismyswitchpatc...
Hi everyone. I will not confuse you in this tutorial, we will do it quickly in just a few steps.
At the end of the video your switch will be successfully modded and after that you
can watch the videos below how to protect yourself from Nintendo Ban,
install .nsp/.nsz files and much more...
Files:
mega.nz/file/O...
90dns alternative:
• How to Avoid Getting B...
Complete list of switch tutorials: • Nintendo Switch Tutorials
🌐 Connect with me on social media:
/ gameroomdnd
/ idx3gaming
If you have a cheap (fake) sd card, expect that it won't work. Those sd cards have strange names (SanDian), "large capacity" and they are cheap. Instead, buy a quality sd card from brands such as SanDisk, Kingston, Samsung, etc.
*Update: Tinfoil 18 just came out and has been added to the pack.
At the time of recording the tutorial I was using hekate 6.1.1 but I included the latest version 6.2.0 in the package (don't be confused by that).
thanks for adding tinfoil
@Rayoski321 You're welcome!
How do I get hbc
Let's assume that the Nintendo Switch is broken. Are these the steps we need to do from scratch to SD card?
wait so after i do all this i will see tinfoil in my albums?
i followed many guides. yours was the first to yield me good results. should have came here first. subbing
Thank you for the sub 🙂
Watched like 10 videos and none of them worked except for this one. Thanks a lot!
You're welcome 🙂
@@IDX3Tutorials help please rcm not found is all i get
I got my switch on the shelf for a while after upgrading it to 18.1 and atmosphere not longer working with it. After following this tutorial it came back to life! thanks
yes, donot update your fw until you are ready to update your cfw or it wont work...
AMAZING WORK! I watched COUNTLESS of videos and discords and everything didnt work! Now it worked! TOTALY LEGIT very good job!
Working!
Thanks for the kind words!
@@IDX3Tutorials brother, can you please make a video about how to transfer files larger than 4gb to the switch or SD card? So many guides are sooooo bad.
I spent all day trying to update my CFW on my Switch I haven't used in like a year and everything went wrong.
Literally followed this guide and less than an hour (mostly waiting for installs) it's all setup perfectly.
Thanks so much
I'm glad to hear that! 🙂🙏
The only guide to actually work. Subbed, keep up the good work!
Thank you for the sub 🙏
The only one that actually works for me, Thanks a lot!!!
You're welcome!
gaaah leee boiii been looking for a quick video like thisone forever lol.... subscribed!
Thanks for the sub!
Was quick and easy to follow. Thanks for the vid and appreciate the work you put into doing this.
You're welcome!
Bro Cheers! what a no-nonsense guide. After hours of time waster guides, you just make it so simply. Was done in 10 mins as it should be
Glad to hear that bro! Greeting to you!
This was a solid entry point for me, super easy to follow and worked immediately.
This guide follows an emuMMC(emulated operating system, basically) that runs off the SD card.
The emuMMC in the video is being created as a file on the SD card (4:40).
From what I read online, the partition method is more fast/more safe in terms of performance and brick protection, respectively.
Was there a reason to use the SD file over the partition? I could be totally wrong! i just started haha. was reading about this on reentry
thanks for posting this and getting me into the rabbithole lol. cheers!
There are several reasons why I practice SD File based emuMMC. One of them is that I like to keep it simple. And the second is that I have never been able to run Partition based emuMMC on one console. There's nothing I haven't tried to solve that problem and I haven't succeeded. Regarding speed and other things, I didn't notice any difference or have any problems with SD File based emuMMC. It's just a theory for me. So I suggest that you don't bother with unimportant things and do what suits you better. Greetings to you my friend!
@@IDX3Tutorials Thank you for your input man!
I completely agree the SD card file is way easy by comparison, this seems a bit more involved.
I'll let you know how it goes, I'm definitely going to at least give it a try, reading a shit ton about everything x)
I really appreciate your response my guy, hope youre having a good day so far:D I'll send the rentry post if you'd like, it is an interesting read
Awesome video and love your responsiveness, mate. getting a new switch soon so i can try this on my first gen switch. checking everything now.
Thank you mate! Welcome to the club! 💪
Only tutorial that actually worked. Earned my sub and like.
Thank you for the sub!
One of the best tutorial I ever found, simple, quick, complete, thank you , you made my day. Subscribed.
You're welcome 🙂
Best guide so far! worked perfectly!
Thank you 🙂
Thank you for including the all in one. No dead links 😁
You're welcome!
ok i finally picked up a new SanDisk legit 129gb and am gonna try it again. thanks for all your help
Nice tutorial, Subbed!!
Thanks 🙂
After following this guide, I turned the Switch off for the night and now when i turn it back on, its reverted back to normal
Every time you shut it down completely, you have to inject the payload again and launch cfw.
thank you so much after 6h i finally came to the right guide!!!!!
You're welcome 🙂
bro you are a god i cant thank you enough!! everything works perfect now i subscribe to the channel. keep up the good work!!
Thanks for the sub!
THANK YOU SO MUCH! its the best tutorial ever, i love it. have a nice day ❤
You're welcome and thanks for the kind words!
Super easy guide process was completed in less than 25mins ❤
Thanks for the feedback.
Thx dude i really appreiate that u saving me rn , je te souhaite du courage pour la suite je t'envoie de la force depuis la France !
You'rewelcome, greetings to you my friend!
Hands down best guide, thanks!
Thank you 🙂
Woah Great job man
Thank you!
Thank you very much! This is the easiest way to do it!
You're welcome!
Thankyou so much I subscribed :3
You're welcome! Thank you for the sub!
Wait, so if the website says my switch is most likely patched does that unfortunately mean I have no way of installing this onto my Nintendo Switch or is it still possible? I guess that's what I didn't quite understand
There is no way without hardware modification.
Nice guide!
I wonder of a back-up step is needed before proceeding with the guide? I have nothing on my Switch, it's a pretty fresh V1.
Another question as I'm very new to own a Switch.
Injecting payload is necessary in case of a total power-off, to be able to boot again into Emunand.
Is there anyway to make (Emunand) the default booting by change the boot order somehow😅?
I read about AutoRcm as a method to skip the rcm jig, do you think it's something preferable or not? Any Android app recommendations for injecting payload?
Thanks in advance
Yes, every time it shuts down completely you have to inject payload and launch cfw. It's not hard, don't be lazy 😀 And don't play with auto rcm! Leave it off.
@@IDX3Tutorials haha thanks for the answer!
About the back-up step is it something necessary? And do you have any guide for it?
Would you recommend the Rekado injection app for Android?
@saleemrustom5827 You can make a cloud back-up if you have save data on it before you format the sd card. As for the injector, use what suits you.
I had a fatal error occured while running atmonsphere 01000000000000000000bd00 ... my fix was write down what the error number is ... go into atmonsphere/contents... look for folder error number and all I did was delete file 0100000000bd00 which was causing the error and boom OLED switch started no problem.
This will surely help someone! Thanks for sharing.
You help me bro!! Thanks for sharing .. ❤
I told you bro... 😀🥳🙏
Hello! I have a Nintendo Switch Lite. It has a chip in it 😀 When I start the original game (Márió Odessy) it asks for an update 😒 If I update it, will it modify the programs on the SD card? Will the Hungarian cfw version work? Anyway, I liked this Switch modification 😀
Hello and welcome to the channel! Is it a game update or a system update? In cfw you should not update anything through their servers. So if it's a system update, you need to update it via the daybreak app. If it's a game, update it through tinfoil. This is my tutorial for updating switches with modchip ua-cam.com/video/-FfETfYXUQA/v-deo.htmlsi=xIZwTcfrdkaM7-QW If you need more help, contact me on IG.
5:28 , mine popped up saying "panic occurred while running Atmosphere"
Title ID : 010041544D530000
Error : std : : abort (0xFFE)
ua-cam.com/video/dNvALYpid_A/v-deo.html
@@IDX3Tutorials thank you, now i got a new issue when i try to block the servers on 90DNS testing , it says "unblocked" instead of blocked and 2 said unresolved
@judie2313 make sure you are connected to the internet before running the tester. restart the home internet if necessary
@@IDX3Tutorials great I managed it, i cant seem to open tinfoil, when i open it it says "could not start software"
Sorry to ask, but I’m a newbie in homebrew stuff. I want to find out if this also updates the original firmware as well assuming the modded switch has an OFW v. 17
Yes, sysmmc and emummc.
Hi, at the beginning you say these files work for other versions of the Switch too, which have the mod-chip installed. What do you mean by that? I have a v1 Switch and its on SW-Version 18.0.0 right now. Should i update to 18.1.0? My Switch has never been Jailbreaked before. Thanks in advice :D
Do not update for now because version 19.0.0 is out. Wait a few days, there will be a tutorial on the channel.
I followed the guide, but when I apply the RCM Jig, insert the SD Card, and then hold + and tap POWER, either it goes into the normal mode with the normal menu, or it's not booting at all.... 🤷🏻♂ Anyone? When I updated the system, i got version 19.
Tutorial for fw version 19 coming soon
@@IDX3Tutorials Ok, thanks. I got it up and running again, and managed to inject the payload.
Then, I created the emmEMU SD File and waited for an 30 mins until it was done.
When I then tried to "Lanuch", i got an error, saying "Unknown PKG1 Version, and HOS version not supported".
Now, when I start the Switch, I just get back to the normal hom screen again, the "hbmenu" thing you have on "Album" is not there.
I just want to double check, is the file package from the mega link you provided also include the sigpatches in the package too or do I need to download that separately? I want to make sure before I download the file and get started on updating my switch.
Yes, sigpatches are included.
I am new to modding, I have jailbroken switch and have emmuc on and I want to use the hb apps but can’t because I need Wi-Fi. I Saw on the video that I need 90dns so would I have the turn my Wi-Fi and then run? I am confused cause I don’t wanna get banned
If you protected yourself with 90dns or some other method, you can use wifi in emummc
*QUESTION* I already have a 32Gb sd card with games on my switch (unmodded yet). Would you recommend having 2 sd cards like the 32gb for the ofw and new sd card for the cfw??
Yes, you can. But keep in mind that you need at least 64gb for cfw.
@@IDX3Tutorials yeah I will buy a 512Gb soon🤩🙏🏻
Hello from Greece. May I have a question. After this jailbreak method, if the console close, normal closing not a sleep mode, we will need to perform a jailbreak again, or it will be active after the opening of switch? Thanks. 🙏
Hello, I will visit your sea soon! Unfortunately after every shutdown you have to re-inject the payload to be able to launch cfw. But everything remains, you just need help to launch cfw.
@@IDX3Tutorials so I'm new to switch jailbreaking. This guide don't need a mod chip right? Is the advantage of a mod chip is you don't need to re-inject the payload, am I correct?
@sdgsabobo If you have a v1 Switch that's unpatched (see website in video) then you don't need a modchip.
With v2, OLED, and Lite Switches, the only way to jailbreak is with modchip. And yes it injects the payload for you so you don't have to do it manually like a v1 Switch.
Thnx. It worked! One question do i also have to follow your video about 'How to avoid getting bannend' or did i do that already by following this video?
If you got all green on the 90dns tester then you are safe.
Thank you 😊
@@kimberleydejonge4521 You're welcome 🙂
everything works but the games don't work and at minute 7:00 mine says „unresolved“ in yellow instead of „blocked“ in green like yours. Can you help me plz !
Have you checked if your switch is unpatched?
yes my switch already has a jailbreak on it I actually just wanted to update now I'm confused
@@magicienschneider9597 You didn't have to jailbreak from the beginning, on my channel there is a tutorial on how to update an already jailbroken switch. But it's too late for that now, here's a fix for your problem ua-cam.com/video/gtVzofxG9Q0/v-deo.html
Need help please! Everything worked until I launched the CFW-emuMMC. It works for a few seconds and then crashes with an error code 2162-0002 (0X4a2). Any assistance would be greatly appreciated.
Go to atmosphere/contents and delete the folder that corresponds to the program id you get with the error.
@IDX3Tutorials i actually have a bigger problem now. My switch will only power on using tegra and the payload. It is no longer powering on normally. I don't know what I did.
You turned on the "auto rcm" option.
@@IDX3Tutorials Just checked, it's disabled.
I've tried everything. Is there anything inside the switch like a memory chip I can pull to completely clear the memory out?
Hello on the page where you can check. I have XKJ written on the switch and this is not mentioned on the page!
That means you need a mod-chip.
Good tutorial thanks! Just a question: if the Switch is restarted... I should run again TegraRCM with usb connected right?Thanks
Exactly!
@@IDX3Tutorials use internet connection without launching the Homebrew should be not a problem... that's right? My Switch is primary used but my daughter (6 years old) and I would like to BLOCK Tinfoil (to avoid unusual activity). Do you know how I can do? I would also like to block the "album icon" with all the modded utility. Any idea?
I want to install atmosphere not update. Can the tutorial above be used to install it too?
Yes, this is the tutorial you need.
Hey so when I try to reinstall one of my games it says "A server communication error has occurrred." I looked it up online and people are saying that it means you are banned. Is this true?
If you try to install the game in cfw, it won't work. You can only use Nintendo services in stock firmware.
@@IDX3Tutorials ohhhh you’re right. Thank you!
You're welcome
@@IDX3Tutorials Do I need to use 90 DNS every time I add a new wifi network? Also I saw on a thread online that said it is not good to have only 90 DNS as the main protection. They were saying to also install atmosphere redirect tool and exosphere. Should I install those?
Yes, every time you add a new network, you have to repeat the 90dns process. I think that 90dns is quite enough, but if you want additional protection, why not...
hi! a quick couple of questions: does this work with 19.0.1? and with an "official nintendo" 128gb micro sd card ? thanks:)
ua-cam.com/video/zHBaFsf8z_k/v-deo.html
4:08 can we use controller or butons for this part? beacause the touchscreen of my switch dont work
You should be able to control the mouse cursor with a joystick, but the joycons must be attached to the switch.
@@IDX3Tutorials thanks
Hey sir, when I try to inject the payload into the switch from the program it says TegraRcmGUI (Not Responding) each time .. is there something I am doing wrong ?! Pls help 😭🙏 ! Is it my laptop ? If the laptop is an issue can I do everything from a MacBook instead of a windows laptop ?? 3:53
Does the Tegra RCM recognize the Switch when you connect it?
@@IDX3Tutorialsyes , tegrarcmgui recognizes the switch when it’s plugged up and in rcm mode ! I’ve looked online and some people said to get a better usb c data transfer cord and it should work or to get a usb a hub and connect the usb c data transfer cord through the hub and the tegrarcmgui should work ! So I’m going to field test now ! But what else do you think could be the issue ?!
@gsensei_ Since you say that Tegra recognizes the switch, another thing that can cause a problem is the USB cable...
@@IDX3Tutorials I literally just bought a new cord , like 3 different ones .. I’ve tried all of them and it’s still saying TegraRcmGUI (Not Responding) :/ .. is the software crashing or something ?
@@IDX3Tutorials UPDATE: Nvm ! I’m sorry for the confusion and sorry to bother you ! I figured out the reason why I was having the issues I was and it was because I have a gen 2 switch and didn’t check what model I had beforehand like you said to do ! So for anyone who’s going through what I was make sure you check to see if you have a gen 2 switch cause if you do you’re gonna have to get a mod chip installed via soldering (and that’s a pain when you don’t have the skillset to do it yourself) .. SO the only other workaround is to buy a gen 1 Nintendo switch that’s mod-able by either going online and find one on eBay or facebook marketplace .. but I recommend going to a local pawn shop to see if someone has turned in a Nintendo switch that’s a gen 1 model .. that’s what I did today and I found one for $140 and it’s in perfect working condition ! GOODLUCK ! And thanks for the tutorial dude !
can i just ask question,is that just installing on sd card ? so when i will take that sd card he will not go in any sort of mode he will go directly to normal official version of switch ?
Exactly
@@IDX3Tutorials thats great ,thanks mate!
also quick question when u are in mod after installing a game are you able to perfrom update of game if needed ofc while have 90dns on?
thanks for you help!
@Edi8RI When you are in cfw, you cannot use nintendo services. You can install game updates using tinfoil. You can contact me on ig, I will help you with that.
@@IDX3Tutorialscan you go online with cfw on emmunand? I mean to use the homebrew app store etc? Not to play.
@@xdsmastermia If you used my jailbreak method then you can.
hello i am new here and it seems people like and love your tutorial video about jailbreak Nintendo Switch, btw bc i am new, are the tutorial and all the steps on the video also works for NINTENDO SWITCH OLED model? I hope it will. Bc i own a NINTENDO SWITCH OLED. Thanks in advance!
In order for it to work on OLED, you must first install the mod-chip. It's a job for an electronics guy.
@@IDX3Tutorials thanks a lot boss for the quick response. Wow didn't know that, that there must be on an electronic guy.
Thank man for you tutorial
You're welcome 🙂
Hello. I have a quick question. So my switch currently is on 18.1, should I do this jailbreak or update to 19 and use the latest method from your latest video?
ua-cam.com/video/zHBaFsf8z_k/v-deo.html first update and then do everything as in the video.
hi, I have another question. I’ll be enable to mod my PATCHED nintendo switch with a RCM loader(or a jig) and with this tutorial? thanks
UNPATCHED only
@@IDX3Tutorials fuck, so I am cooked. thanks so much for answering to my 3 questions!
hi, i noticed the airplane mod for avoiding the ban, but with this feature i won’t be able to use my pro controller and my joycons on wirelesss?
It's temporary until you block nintendo servers with one of the methods. after that turn off airplane mode.
Hey man. I'm currently following your guide, but this is completely unrelated.... but I NEED that screensaver 😍 Where did you get that from?!?!?!?
Wallpaper engine on steam
hello. and thanks for all the help. i followed your tutorial but am having issues.. i do have a 1TB card.. not sure if that might be the issue. its good up to 5:19 of your tutorial when i go in to Launch.. that is where i get error
any help will be really appreciated. thanks
Which sd card do you have?
@@IDX3Tutorials its a generic one that i got from Walmart online. am redoing the tutorial as we speak. am in the step "create SD File emuMMC 5:03
i also notice that after the file is created under "emuMMCInfo & Selection" mine didn't say "Enabled"
@@IDX3Tutorials do i need to create a "emuMMC (RAW) partition before doing the "create SD File emuMMC"?
Try sd partition instead of sd file based emummc
Hi everything's working but my 90DNS test doesn't block anything at all! How can I sort it out? Thanks
ua-cam.com/video/gtVzofxG9Q0/v-deo.html try this method.
@@IDX3Tutorials I was able to sort it out by not renaming the file
My little sister updated my switch now I have to do it again (before it was on update 16)
Any issues I should know about
If you follow each step there should be no problem. Happy modding!
Hi, for someone that is completly new to modding, what else should I watch beside the "how to not get banned" video? If I dont know how about any of the stuff like Awoo, Tinfoil, , exosphere, etc
HI,You can write to me on IG and I will explain
Hey Dude I cant find one of your videos that I was watching in june this year..... I was addicted to the song, it was more or less eletronic and a girld voice in the background echoing like" I just want to live a new day...." I dont know for use if this what she says, since thevoice sounds echoey and in the background.
A New Day by Ethan Sturock (FTUM release)
Hi. The cable that connects from SWITCH to PC, is this the cable that comes with SWITCH to charges Pro COntroller? I am using this and it shows "NO RCM" when I try to run Tegra. Also, when I held down + in VOLUME while holding down power, was the switch supposed to come on? It did not for me. Appreciate your answers video is well made. thx
OK I now see RCM detected (GREEN) though when I try to inject playload it doesnt do anything. In your video you show a picture in picture of switch at 3:55. Cant see what is being done here. I have no image on my switch. Battery charged it powers up fine before all this. Thx.
Did you check if your switch is unpatched at the link in the video description?
@@IDX3Tutorials Hi. I got it working well. However, I had to add one more file to enable Android transfer, so, I took SD card out and when I put back in and booted it up (like I do normal switch), the files do not show in the album. I check all file still on SD card. Is there something I did to lose connection to the "HomeBrewed" switch? Thx
Its a first day 2017 bought switch. COnfirmed serial number. So, do I need to use the jig everytime to boot up in homebrew? Or just power it up like normal? The album area no longer has the Modded/Homebrew Element to it. thx
@@IDX3Tutorials Ok so, after removing the sd card to add a video game onto it, I put the card back into the switch and the switch is not showing the homebrew/mod files in the ALBUM. This is the second time this happened (I modded it again after the first and it was working fine until I removed the card). Am I doing something wrong? Is there a special way to boot the switch up to put into Homebrew Mode? Thx
this tutorial is great but when I tried injecting the payload it says "Couldn't open payload file 'C:\Users\dani_\OneDrive\Desktop\SD Files\hekate_ctcaer_6.1.1.bin' for reading
Error while injecting payload (RC=-2)"
You have to select the payload from your computer.
@@IDX3Tutorials thank you. My switch was patched the whole time
You have to check that first
I want to know, I clicked on inject payload and it still shows a black screen and the Hakate page doesn't open. What is the reason?
Maybe your switch is patched.
Hey I have switch with SX OS dongle, if I use this jailbreak instead, it means I can't use sx os anymore right? So I need to always inject the switch with tegra and can't use my dongle anymore to inject?
My switch firmware is still at 11 btw, since that's the last compatible firmware for sx os.
You are right my friend. I advise you to wipe everything before the system update.
@@IDX3Tutorials Oh i tried ur steps, but i got an error SD has GPT only, failed to launch when i choose CFW-emuMMC. what can i do to fix it?
@@rezaherdiansyah8575 Can you write to me on ig?
@@IDX3Tutorials it's fixed! I only need to copy all the SD files to the root SD card and now works like a charm! Thank you so much for your fast tutorial! 👍
@rezaherdiansyah8575 You're welcome!
Thnx for Tuto...its work fine.. i want ask u about the FW update manualy (offline)... i need to use sysnand or emmunand to install ?it?
Emunand. You can also find a tutorial for the update on my channel.
@@IDX3Tutorials i have black secreen after update and still is on FW 17.0.1... i used daybreak to install it... i will tray again with ur files
@user-ik5zl7gq4h ua-cam.com/video/F1DJIc8Cysc/v-deo.html follow this guide.
Hello. :) I download the file from the infobox, but there is "hekate_ctcaer_5.0.0.bin" inside, not 6.2.0. Is this right so?
No, it's 6.2.0 in the package. If you are trying to update an already jailbroken switch, you have a tutorial for that on my channel.
5:28 days unknown pk91 version HO$ not supported or mummies corrupt
If you have version 19 on the switch, you will have to wait a few days for the new tutorial
do you know to get homebrew appstore on it ? , btw great vid
ua-cam.com/video/zF_sc79NNJY/v-deo.html
I have a question. I bought switch that has hekate, but guy didnt used it long time. Do i need first to update software, and then transfer games? And how to access browser for youtube and stuff like that? One big thing that i wana ask is, can i change that i play on another account online games free from switch, and other account for modded?
It would be best for you to start from the beginning like in the video in order to understand the jailbreak. At the end of the process, you will have emummc, which is a completely separate system and you use it for mods, etc. You also have the stock firmware that you use for online and Nintendo stuff.
doesnt work for me, when i try to setup says NO RCM, but RCM is physically in... and when i try to turn on Switch with power button+power up, nothing happens, and when i plug it into PC via cable, automatically turns on
Hold + and press the power button. If it won't detect, maybe you need to install the driver from the settings tab. But first of all, check on the website whether your switch is unpatched. Link in video description.
@@IDX3TutorialsI can’t press inject payload
can you solve your problem !! i have the same issue
Hello, just one question : tinfoil 18 doesn't have newest games, while in their site they have almost all of them, is there any way to refresh library of games?
Milose,pisi mi na ig
Does it include new sigpatches as well?
Sigpatches included
Hello! Will this work on a Switch OLED 18.1.0 with a mod chip installed? Thanks! ❤
Yes, just follow the steps.
Would this work if I updated a previously modded v1 switch to 18.1.0? Basically tinfoil etc was working but pressed update and everything broke. so do I have to re do this process or it’s bricked?
ua-cam.com/video/F1DJIc8Cysc/v-deo.html follow this tutorial.
Nice worked, had to install NUT too off tinfoil, but was super easy then, once you locate where to download the game. Although launched the game, doesnt seem to be up to date, but you can cancel the update, launch the game, but then the game seems to want to update in the background which is worrying?
DNS wasnt blocked, so done that again. ah so tries to update in the background now, but not working i think. But before I re-blocked the DNS it was "updating" in the background I think, so have I messed up? Will the switch be banned?
Need to find a more up to date to get the games.
DNS blocking is the first thing you should do after jailbreaking. I hope you were lucky and didn't get banned.
@@IDX3Tutorials yeah, i had then moved location and wasn't blocked in the 2nd wifi so it went through and had to re-block. Switch finally died, so need to work out how to re-boot, cant seem to get it to work?
jig in, Power + "+" (switch dosent respond) plug it into the computer, then run the program per 3:50 thats on your computer, then inject and this should turn on the switch? Should be all for a re-boot?
@Iby00 That's right, after that just launch emummc
@@IDX3Tutorials read... 3:55 missed the bit that said i need to choose Hekate then inject that, then it just sits and loads? not sure if i messed anything up by the attempts earlier that were wrong. sorry
great tutorial, have you had issues with 90dns? all the servers are "unresolved"
If 90 dns doesn't work for you, this is an alternative ua-cam.com/video/gtVzofxG9Q0/v-deo.html
@@IDX3Tutorials works a treat now. Thanks
My switch didnt boot up hekate when I injected the payload even though it says the payload was successfully injected, did I do something wrong?
Probably your switch is patched. Did you check the website? You have the link below.
@@IDX3Tutorials it said it was possibly patched, so I'm guessing it is
That's right
Hi, I am about to jailbreak my switch, I would like to play GBC and GBA games, my question is do I need to install another app? Or with the awoo installer it’s good?
After jailbreak install hb appstore. There you can find various emulators. ua-cam.com/video/zF_sc79NNJY/v-deo.html
@@IDX3Tutorials thank you so much for the reply. Just subscribed to the channel ❤️🫶🏼
@gustavtoxxxx thanks for the sub!
hey there! Quick question. So the switch that just got a chip installed. Whats the process? Just plug in, drop files on switch and inject?
Thanks in advance :)
everything is the same as in the video, only you don't have to use tegra rcm because you have a mod chip.
@@IDX3Tutorials So I just flash it via cable. And then ad files to sd card to booth from?
@skyglidestudios3443 Once you put the files on the sd card just turn it on and continue the process.
@@IDX3Tutorials Ok. So I dont need to flash anything. Just put the files on the sd card.
just follow the steps
I have the Picofly mod chip.
After i updated all it boots up fine then once you restarted, the boot is crashing.
0100000000000001F
If the fw is 19.0.0, you will have to wait a bit. There will be a tutorial on the channel soon.
when I try to dounload the driver for tegra I get an error, any ideas
What error are you getting? Maybe the driver is already installed. Try with tegra rcm installer. It is portable in the package. Also check the connection.
Hi how to erase all of these if I want to go back to un-jailbroken switch? Thanks
Just format the sd card.
i have a question, i have a v1, but in website it says that mine serial number has a yellow sign(warning), did a need a modchip?
You can try. If the payload doesn't pass, then you need a mod-chip.
hey i just updating my atmosphere using aio deepsea before i found your video, and now my hbmenu cannot be opened saying "is not currently on the console" is there any way to fix this? thanks.
The files are probably in the wrong place.
@@IDX3Tutorials just figure it out, i deleted the homebrew menu from apps tile and run it on applet mode. works perfectly fine
@IDX3Tutorials hey, No matter what I try, I cannot launch CFW - emuMMC. It gives an error and in "emuMMC info & selection," it shows that its disabled. Can you help me? I tried both your old and new videos, but none of them work
If it says Disabled after creating emuMMC, the sd card is probably bad or of poor quality. Try another one.
@@IDX3Tutorials Its a Xiaomi 1T SD card. I saw other people use it as storage for Nintendo. Could something else be the problem? Because with my old 64GB SD card, your old video worked a month ago
@@IDX3Tutorials Is there a way to enable it manually? I saw another UA-camr create an SD partition instead of an SD file, but that didnt work for me either
@vvegasa You can try. Press "select emuMMC" and then select it.
@@IDX3Tutorials Did that but it does not work (( thanks anyway for the response
Hi great tutorial, when i try create the emuMMC it finishes & says disabled emuMMC disabled and eMMC will be used for boot. any advice? thanks
The answer is in the pinned comment.
@@IDX3Tutorials i have resolved this issue now thankyou. I have another problem however, i run the 90dns setter, reboot and then run the 90dns tester & every region says 'unresolved' any advice? Thanks
@KoSnody Did you turn off airplane mode before testing? You must be connected to the Internet for this check to pass.
@@IDX3Tutorials yes I did, I managed to sort it by copying a file with the ips blocked onto the sd card from another tutorial & then the test was successful.
Thankyou
Hey man im having a problem. I recently got a new sd card and its a 2TB FAT32. I did all the steps but I'm it would show "emuMMC is disabled and eMMC will be used for boot". When i try launching atmosphere it wouldnt work and would show an error.
I'm guessing it's some cheap noname sd card and it won't work
@@IDX3Tutorials I mean I _did_ get it for 3 bucks.
Everytime I try to launch emuMMC after completing every step it says a panic has occurred while running atmosphere and an error screen appears. Any suggestion on how to fix this?
ua-cam.com/video/dNvALYpid_A/v-deo.html
If I had games on the sd card already, after all the setup is done, can I just move the nintendo folder back to the sd to get my games back or what? Because I'm not in the mood to redownload 215gb of games
Also, if I have the card in Fat 32 already with my games in, can I just put the hack files in the card without formatting or I need the card clean?
If your switch is already jailbroken, on my channel you have a tutorial on how to update a jailbroken switch. That's the only way you won't lose data.
@@IDX3Tutorials no that's not what I meant, I mean if I'm going to do the jailbreaking process in my unpatched switch with my already formated FAT32 512gb SD card with the "Nintendo" folder with all my games, saves and screenshots, do I still need to format the card or I can keep the Nintendo folder with all my legit games in there while doing the thing?
If it's fat32, you don't have to format it again. You can just skip the guiformat.
@@IDX3Tutorials thx for the info, I thought I have to do it with an empty card only, but I saw in other video that as long as the card is FAT 32, have enough free space and the jailbreak files are placed in the correct place, there should be no problem having the normal switch SD contents.
hello brother i wanna thank to u for your wonderfull video but i have one question for your.
i have v2 switch and i did not do anything on it. i mean its original can i jailbreak mine or not?
You can't bro. You need a mod-chip.
I have a problem... once I rebooted my switch and launched CFW-emuMCC all the games disappeared. The strange thing is that in the stock version (without launching CRW-emuMCC) the chips are present (but they cannot be started naturally). Some idea?
EDIT: i have changed my user profile so maybe the games was removed. No problems to reinstall the games but: any ideas to restore the saved data for games?
If you followed this tutorial, the sd card is formatted and you have to download everything again.
@@IDX3Tutorialsso... everytimes you turnoff and on the console all the saveddata is formatted? Wtf
@@IDX3Tutorials wait... the Switch was already modded. Al the game installed was installed by Tinfall.
Did you do this tutorial or just have a problem not related to the tutorial?
@@IDX3Tutorials yes. And everythings works good. I have installed it one weeks ago. Today I tried turnoff the console. When I started (in stock mode) all the game installed by Tinfoll was present. Than I turned it off again and restarted it with emuMCC. Everything was ok, the problem is that all the game installed with Tinfoill was removed (also Tinfoill was removed). I need to reinstall it all again and all the savedstate was lost. I don't know why but the games installed with Tinfoil was present into the sotck page of the Switch but not when I start emuMCC.
Hi, could you please help me please??
So while creating the SD File emuMMC it say
Error (5) while creating
emuMMC/SD00/eMMC/BOOT0
i don't know how to solve please help??
You don't have enough space or the sd card is bad.
Should I wait before updating my modded switch? I'm still on the last version before this update
If you are already jailbroken, there will be a tutorial on the channel in a few hours.
@@IDX3Tutorials I guess I'll wait for that one!
What happens when the console eventually powers off? Do I need to reinstall everything? I’m confused
No, just inject the payload and launch CFW - emuMMC
@@IDX3Tutorials thanks 🙏🏼
@@IDX3Tutorials so my switch turned off, I re injected payload but then I also went and did the “create emummc” step. I launched cfw but none of the games I had downloaded previously are showing up. What can I do?
You don't need to create emummc every time. You just need to launch emummc from the launch menu...
@@IDX3Tutorials gotcha 🫡
So what about the games I had downloaded from tinfoil? I can’t see them anywhere but my memory card is full.
Nothing seems to happen after clicking Inject Payload. Says it was successful but i get black screen, Any advise?
First, check if your switch is unpatched at the link below. If not, you can't do anything without hardware modification.
Hi, please could you help me. The jailbreak worked. But when i put games on the sd card, my jailbreak is gone. 😞
My sd card is from Scandisk.
When you completely shut down the console, you have to inject the payload (hekate.bin) and launch emummc again.
@@IDX3Tutorials I feel a littlebit stupid right now ;) I did the thing with the paperclip and your whole video. But when i put the games on the SD card en put in. The "albums" is changed back to the real albums/gallery. So if i understand it right i can't go to de emummc, because you go there to use "albums"? Or did i understand it wrong. I tried it more than once and every time this happend. Thanks for your help again.
Hi, i have just bought my very first unpatched v1 Nintendo Switch current system version 13.0.0 as well as ( RCM JIG , 256gb SD Card and a SD card adapter). The only thing i have done is format my 256gb SD card to FAT32. I have not connected my switch to the internet or signed into my Nintendo account. Could you please help me on what to do next!?
Just follow the guide
@@IDX3Tutorials Thanks to you i have successfully installed the jailbreak following your video without any errors. it was one of the simplest and easiest guide ever.
@@dontruecorleone7505 I'm glad to hear that! 🙂