How-To: Canon XF400 and XF405: Shooting with the Camera
Вставка
- Опубліковано 2 сер 2024
- The Canon XF400 and XF405 are very versatile ENG-style camera systems. In this video, host Jem Schofield demonstrates strategies for shooting with the camera for best results. He goes in-depth about frame rates, slow and fast motion, interval recording, zoom features and lens attachments, ND filters, and infrared recording.
- Наука та технологія
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
Thanks Jim
thank you for these videos!
Thanks for this very informative video. I ordered the XF400 and look forward to using it right away. I come from the XA20/30 series and miniDV Canon Proline video cameras before that. Can you provide the details on the large video monitor you are using? Is it just a large monitor or small LED TV ? If not, details please?
Hi, regarding the slow motion does when picked one does the shutter speed not adjusting to suit ? Or is this adjustment done automatically. Thanks Sam
@CanonUSA Just wondering what tripod was used outside of the restaurant?
Nice video, but why did you discontinue the production of the XF400 and XF405?
They were nice cameras, only an internal recording function at 4:2:2 10bit was missing.
With external recording at 4:2:2 hd can post software to create a film look allow for a pretty decent film look of shot in 24p wide dr? I’d like to mix it with a c100 or and 5d mark 4 film look.
Hi there! 4:2:2 provides great room to work with and editing software is quite helpful when it comes to matching up footage shot with other cameras. Our team of experts is happy to answer any questions you have and provide one-on-one advice. Please give them a call at 1-800-OK-CANON (800-652-2666) weekdays between 10 AM and 10 PM, or on Saturdays between 10 AM and 8 PM ET. We look forward to hearing from you!
Is Canon going to provide a Shooting with the XF705 Camera?
Hi. Is there quick access to change white balance on the fly. ?
Hi Scott. You can set one of the assignable buttons to [Set WB Priority]. This allows you to press that button to quickly switch between the current white balance and the white balance setting selected for [Set WB Priority]. You'll find [Set WB Priority] under [Camera Setup] in the menu. We hope this answers your question.
Awesome video!
How much run time do you get shooting at 4k usually? I know there are a few variables with frame rate and card options. What's the best option for single use card for 8+ hours of recording @4k?
Thanks! :)
Hi! As 4K video can eat up a lot of memory in a short amount of time, a bigger memory card is definitely better. Check the specifications at canon.us/3mcRAXT for information on the recording time you can expect from your XF400 and XF405.
Hope this helps!
any shortcut if i shoot in 4k if i want to take a scene in hd/120fps without menu diving?
Hi there. While it is possible to customize the functions of some of the controls, the assignable functions available do not include changing the resolution and framerate. We hope this answers your question.
Hi, why is slow and fast motion greyed out on my XF400? I'm in UK so settings are PAL.
You need to switch off Face detection and relay recording to make it live. You might need to shoot at 1080. You cannot record sound if memory serves. Cannot remember all the things you need to be disabled but I hope that works.
Thanks for the video, questions please: Is the LCD screen on the XF400 *really* 3.5" in size? From this video, there appears to be a black mask that seems to reduce the usable dimensions of the screen. I am considering buying the XF400 for its larger 3.5" LCD screen versus the XA50 for its smaller 3.0" LCD size. I have a hard time seeing those tiny icons and text on my Canon Vixia G60 camcorder 3.0" LCD screen and hope the XF400 LCD screen is in fact 1/2" larger (3.5") in size. Also, does the XF400 offer built-in WIFI for online streaming? The specs on the B&H website seems to indicate so, I just want to confirm that (or does it require a firmware update)? Thanks!
Hi, Casey! In addition to being equipped with a 3.5"-wide LCD screen, the Canon XF400 and XF405 feature Wi-Fi connectivity that allows you to stream live video and audio over IP without the need for any upgrades. Hope this helps!
@@CanonUSA Hello and thank you for your reply! Great, I'm looking forward to the larger LCD screen! So IP streaming is a feature already built into the XF400 without any firmware update? If so, that's great! The B&H sales rep I spoke with today says that IP Wifi streaming is possible assuming if the XF400 has the latest firmware update installed, otherwise if not, a manual update is required. Based on what you are saying that IP streaming is already included as a feature, that would indicate the B&H rep is wrong. In any case, I just today ordered a brand new Canon XF400 from B&H Photography in New York. Even better, I had B&H match the kit package pricing that Adorama Cameras is offering which is to include 2 free Canon BP 828 batteries. So B&H is giving me 2 free Canon batteries for my new XF400 purchase to match Adorama's kit pricing deal! I should receive that next week, looking forward to it!!
Hi just wondering why I can only see frame rate options of 50P and 25P ?
Hi Yannick! The system frequency / frame rates available will depend on what region of the world it is purchased. There is a version that has PAL, just like there is a version that has NTSC. 50p and 25p would indicate you have the PAL version. Here in the US, you are not limited to having PAL available to use, as you can send it to a Canon Service Center to have NTSC added later as a pay-for upgrade. We hope this answers your question.
Saw this pitted against the Sony Z90 and I couldn't believe how much sharper/clearer the Z90 footage is as compared to Canon. I prefer Canon, so I was wondering if there have been any firmware improvements for the XF400/XF405.
I'd love to see the footage you're referring to.
As an XF400 shooter, I can assure you, it absolutely, unequivocally has ZERO sharpness/clarity issues, or any IQ issues for a camera in this class. I love the look of the C100ii, and honestly, I think the downsampled XF400 4K footage is even better. I just finished a 2-cam shoot and I can tell you firsthand, the intercutting of footage has been pleasantly seamless.
The Z-90 is a fine little ENG tool, but like so many other Sony cams, its highlight roll-off is not good. The Canon just has a more appealing look (says the guy who has a Canon investment to defend, ha ha).
I can tell you from my experience shooting and owning an EX1r, FS5, FS7 and Z150, my Canon footage grades better, and it definitely has superior highlight roll-off. Here's a little demo we did to deduce how much color grading could be done with the thin 8 bit color with 4:2:0 subsampling: ua-cam.com/video/gXFXuavAOEk/v-deo.html
@@idahofallsmagazine3691 Sure...here ya go: ua-cam.com/video/QZy72JVYOaU/v-deo.html
James Matthew Gallagher I was looking to buy the XF400 from the shop that made that video and asked exactly the same question. Carl, who you saw in that video, said that the Sony is digitally enhancing the image and the exact same sharpness can be added to the Canon’s whilst post editing.
Can you explain the physics behind the IR? Is it detecting levels of heat to create a picture or r u casting an IR light on the subject to illuminate the area? If it is used from inside a helicopter at night and shooting at the ground below, will it detect hot spots on a forest fire burn area from the heat they generate?
Hi, Martin! Canon camera gear uses infrared light to help it focus. This is invisible to the human eye and the light's reflection isn't picked up by the image sensor. It's a pretty simple system and it doesn't detect heat signatures.
Hope this helps!
@@CanonUSA Thanks what about the 705 IR? Is that the same? No heat pickup?
Why in the LCD the counter goes forward when last clip end, when I begin
a new shoot? It should start at zero for each clip... How can I
resolved?
Hello:
The time code can be set to different configurations. If the time code mode is set to [PRESET] you can set the initial starting value for the time code. Then if the time code running mode is set to [RECRUN], the time code runs only while recording so clips recorded consecutively on the same SD card will have continuous time codes. Please refer to pages 74-75 of the camcorder manual for details. Here is a shortcut: Canon.us/9tubp . This aids in organizing clips on a timeline.
If you have more questions our video support agents are happy to assist you. For support, please register your product to under your Canon Account at the link: Canon.us/mcahy. Once you log into your account, click the [Service & Support] link and select the support method.
We hope this is useful.
CanonUSA yes but if I want that each clip begin from 00? How can I do?
Hello, interested in new firmware update for C-Log 3. My XF400 does not display a firmware submenu under the wrench in the menu. Also, does one need to have first completed the previous firmware upgrades? Or can you simply jump up to the most recent firmware? Thank you.
Hi Alec!
When you download the firmware file from the Canon website, there is the firmware and a detailed set of PDF instructions for installing the firmware. You will want to read and to follow these instructions very carefully. The firmware can be round here: . You can check your existing firmware by sliding the POWER switch to CAMERA and then pressing the MENU button. You will navigate to [System Setup] => [Firmware] to view existing firmware.
You do not need to have already installed previous updates. If you have other questions our video support agents are happy to assist. You'll find your personalized support options in your My Canon Account at canon.us/account.
We hope this answers your question.
@@CanonUSA Thank you. I did all of the above. The firmware update from 1.0.0 to 1.0.5 failed. The new profiles (C-log3, EOS, etc) cannot be activated because the CP option in the menu settings under the wrench icon is blacked out. Quite a bit of functionality is blacked out. Zoom blacked out...quite a few settings are blacked out. I'm befuddled. I followed the directions closely. I did send an email inquiry to Canon Support.
Is there any difference between the xf400 and the gx10 other than the accessory pro-handle attachment? If so what else is the main difference? I just received a new gx10, and can't find a single informative video on a $2500 camera.
Hello:
The major differences between the cameras is that the XF400 comes with the audio accessory handle with professional XLR inputs. The XF400 also has an Ethernet port for connecting to a wired network. You can contact our video support agents for additional information. They can be reached at 1-800-652-2666 Monday-Friday: 9:00 am to 9:00 pm ET, excluding holidays.
We hope this helps.
@@CanonUSA thank you so much for your reply. Would you recommend this video series as good reference to use for a how-to on the gx10? Also, is the handle attachment that comes the xf400 compatible with the gx10? If I ever had a need for it in the future, it would be nice to know I could upgrade.
I will like to know if I can mix the HD footage from the xf400 with my m50 and my 5dMk3
Hello:
The XF400/405 camcorder has an [EOS Std] custom picture option. This setting approximates the look of an EOS interchangeable lens camera when the picture style is set to [Standard]. Adjustments may be required in the editing phase for best results. Our camera support agents are happy to discuss your options. They can be reached at 1-800-652-2666 Monday-Friday: 9:00 am to 9:00 pm ET, Saturday: 9:00 am to 7:00 pm ET, excluding holidays.
We hope this information helps.
@@CanonUSA thank you, I have a line up of one 5d mk3 and two m50, I was wandering if it will better to use à XF405 in this mix or should I go with the XC15 for color adjustment.
wondering is there a a 23.97 fps in the pal version of this camcorder?
Hi! The versions of the XF400 and XF405 camcorders offered by Canon USA will conform to NTSC specifications. For information on the PAL versions of these camcorders, we recommend checking with a Canon subsidiary in a PAL region. You can find one by visiting canon.us/globalsupport and clicking on the map.
Hope this helps!
@@CanonUSA I think smikes is just asking if the PAL version shoots 24p (23.98, not 23.97, just to nitpick, haha). I think the obvious answer is yes.
Does anybody know if you can shoot infrared in 4k? What are the recording options for infrared? Thanks :)
Hello:
You can set your resolution as you normally would and just switch to infrared (IR) as desired. If you look at the camera screen displayed at 11:00 in the video, you will see, on the right of the display, the camera is set for 4K UHD (3840x2160 resolution). Certain settings are restricted when IR is enabled. You may want to review the NOTES list on page 93 of the camcorder manual for details. Here is a shortcut: canon.us/37QmxsB.
If you have other questions, our camcorder team is happy to help at 1-800-652-2666 Monday-Friday: 9:00 am to 9:00 pm ET, Saturday: 9:00 am to 7:00 pm ET, excluding holidays.
We hope this information is useful.
XF405 - attached external monitor via HDMI and can get static media menu view only - monitor indicates 'no signal' when I play media or switch into camera mode. This is important to fix - I have set output to HDMI. What am I missing - Monitor is Neewer
Hi! Our camcorder support specialists will be glad to go over your setup with you. They're available weekdays and Saturdays at 1-800-OK-CANON (1-800-652-2666).
Hope to talk to you soon!
Thanks for all the demo...hmmm unfortunately mostly in this kind of shoot you never mention which camera you use to film your shots ( as the main camera) most of the time people thinks that this is shot by XF400 or XF 405 can you please clarify and print on the screen bottom to say which camera was used to film this, which lens etc please....otherwise it will be misleading. thanks for all your effort.
Cheers!!
Vsauce
only sdr gamma curve camera. this is pathetic
Hang on a minute,you claim there is no degregation in quality when using the X30 Advanced zoom feature. Did you actually really look hard at the image you have recorded here. Look mighty soft and broken up to my eyes. Have a look at this point ua-cam.com/video/jSJhVD1lGGc/v-deo.html