I just got a Masters of the Universe Origins Hordak figure that was crammed into my mailbox so the card is crumbled and wrinkled. Your video hit the spot! I just need an iron now! I suppose i could heat up a pan, but that's harder to control temperature (and might get soot from the flame onto the card.)
@@fajarf1395 does this technique only work for hot wheels card board or can it but done with other forms of cards? also how long did it take to really get the crease out?
@@c00lkid53 sorta kinda. It flattened it some but when I was doing it. I rushed and it creased it more. It’s probably going to be a practice makes perfect kind of thing.
The before and after is quite stunning, and the technique is very helpful to know. However it's unfortunate you can see what i believe to be 'Iron V-Shaped' press marks arrayed across the front when viewing the afterwards footage. Perhaps there's more technique in not pressing as hard, or to perhaps use a layer in between the iron as well so as to not mar or 'press into' the card stock. Other then that, outstanding restoration work. Just please be mindful cause the effects of the iron are quite prevalent in appearance to the eye.
Holy shit. I’ve just a 2013 F&F Toyota Supra for $20 because it had two big ass veins. Had I known this before I could of sold made $35 easy. Well. Better late than never knowing
Om saya mau tanya.. Jadi beberapa minggu ini di tempat saya kan sering hujan, kebetulan saya taruh koleksian saya di Box container dan saya taruh di gudang. Nah saya baru dikasih tau sama orang tua, kalau di gudang itu atapnya ada yg bocor dan lantainya sampai basah. karena saya khawatir jadi saya putusin untuk ngecek, nah pas saya cek saya kaget karena Hw saya yg keluaran lama/card biru ada perubahan. 1. Di pinggiran bubble nya kayak ada basah" nya gitu. 2. Di pinggiran Card nya jadi kerut gitu. Padahal saya mikirnya karena saya nyimpen nya di Box container harusnya aman" aja, tapi yg berubah itu rata-rata Hw lama, kalau Hw baru masih bagus. itu kira-kira knp ya om? Mungkin bisa dibantu jawab 🙏🏻
I’ve found this definitely helps straighten cards but in terms of wrinkles I couldn’t get any out myself, has anybody else had any luck removing wrinkles?
I cant really believe if this is true . Reason is the card could have been switched. I would love for it to be true as Im a collector myself . Just that the card wasn't in continuous view of the camera the whole time . If it is true my apologies
I just got a Masters of the Universe Origins Hordak figure that was crammed into my mailbox so the card is crumbled and wrinkled. Your video hit the spot! I just need an iron now! I suppose i could heat up a pan, but that's harder to control temperature (and might get soot from the flame onto the card.)
good luck with the pan bro! try not to burn your entire house down
OK, that's extremely impressive..!! Well done my friend..!!
Nice video, no shade but could you let us know, did u use water, on the back of the card, and how hot to make the iron.
Yes i use pure water sir....iron hot looks like for Cotton Tshirt
@@fajarf1395 does this technique only work for hot wheels card board or can it but done with other forms of cards? also how long did it take to really get the crease out?
@@fajarf1395 for soft corner put water also
Thank you this came in very useful 😃👍
wish me luck on my civic EK9 STH lol. thanks for the vid!
Did you fix it? I Have one EK9 STh same😊 problem
I might as well try it. I’ve got all the components to make it happen. Thank you for sharing.
Did it work?
@@c00lkid53 sorta kinda. It flattened it some but when I was doing it. I rushed and it creased it more. It’s probably going to be a practice makes perfect kind of thing.
@@foundwanting1 ohh thanks, I was about to do it with my premium one. Thank you for updating your experience
Will the same method work on a box? I have a pretty expensive collector’s edition box which is sealed but has some creasing
What's the name of the liquid you used ?
Wah gokil nihhhh, bermanfaat banget, makasih ommm
how much heat do you need to use
Cool,I enjoy watching your video my friend
The before and after is quite stunning, and the technique is very helpful to know. However it's unfortunate you can see what i believe to be 'Iron V-Shaped' press marks arrayed across the front when viewing the afterwards footage. Perhaps there's more technique in not pressing as hard, or to perhaps use a layer in between the iron as well so as to not mar or 'press into' the card stock.
Other then that, outstanding restoration work. Just please be mindful cause the effects of the iron are quite prevalent in appearance to the eye.
What liquid use for it
Gotta try this. Gosh i hope this works... Gonna tell ya when i try it
Did it work?
Did it work ??!
Did it work?
Did it works?
2 years ago ,and u dont tell it 🥲
what is the flat iron settings? middle?
Cotton sir
What about crackhed hotwheels bubbels?
kad sth aku ...bolehlah bikin kalau berkerut mcn nie....info lagi
Yoyoyo
Leh uga neg dipraktekin aaahhh
Soalnya flying customs cardnya pada kena petir... Akibat perburuan keras 😁
Is that.. Just simple water?
What liquid did you put in it
i have a sealed acceleracers chicane that has a slightly bent corner, wish me luck as im gonna try this method
so, what happened?
@@ryjed193 Ngl I’ve been scared af to try it since it’s sealed from 2005 ☠️
Bermanfaat om ilmunya ☺️👍
Holy shit. I’ve just a 2013 F&F Toyota Supra for $20 because it had two big ass veins. Had I known this before I could of sold made $35 easy. Well. Better late than never knowing
How do you fix dent plastic?
Does this work on pokemon cards?
no
because aji😂ifbshw
What's that liquid you put
Om saya mau tanya..
Jadi beberapa minggu ini di tempat saya kan sering hujan, kebetulan saya taruh koleksian saya di Box container dan saya taruh di gudang.
Nah saya baru dikasih tau sama orang tua, kalau di gudang itu atapnya ada yg bocor dan lantainya sampai basah.
karena saya khawatir jadi saya putusin untuk ngecek, nah pas saya cek saya kaget karena Hw saya yg keluaran lama/card biru ada perubahan.
1. Di pinggiran bubble nya kayak ada basah" nya gitu.
2. Di pinggiran Card nya jadi kerut gitu.
Padahal saya mikirnya karena saya nyimpen nya di Box container harusnya aman" aja, tapi yg berubah itu rata-rata Hw lama, kalau Hw baru masih bagus.
itu kira-kira knp ya om?
Mungkin bisa dibantu jawab 🙏🏻
Lembab om, box kontainernya ditaruh silica gel aja biar aman cardnya
Mas mau tanya dong, ini setrika nya pakai di suhu yang pakaian mana ya puter2 an suhu di strikanya itu
Cairan nya pake apa om
Hallo kak itu memakai cairan apa ya?, air biasa?
Bang kalo yang kerut bagian belakang setrikanya gimana?
0:37 what do you put on the card
Water
Tequila
0:30 is that water?
yes
Bro he Waited 2 years Before He Got the Answer 💀@@mutaufiqulshobari8795
Is that just water?
can this work for a Pokémon card?
I’ve found this definitely helps straighten cards but in terms of wrinkles I couldn’t get any out myself, has anybody else had any luck removing wrinkles?
its just water?
Does this work on Pokémon cards
Guna air?
Is this water?
kalau blister crack gimana om
Did it work for anyone? And how much time to heat
Thank you soooo much !!!!
Nice job
What did he put on the card????
Water
Itu pake aer biasa bang?
hadir,, salam satu hobby
bermanfaat sekali,, tipsnya
Trmksh om☺
itu pake air apa pake aseton?
Di suhu berapa om?
Itu pake air biasa bukan?
That was beautiful
Blister premium bisa om?
Wuaoo 😲😲✌️👍👌👏👏👏
Pakai air om?
Itu di kasih air baru di strika om
I cant really believe if this is true . Reason is the card could have been switched. I would love for it to be true as Im a collector myself . Just that the card wasn't in continuous view of the camera the whole time . If it is true my apologies
Pake air biasa om?
Btw, nice trick.....
Iya air biasa om hehe
@@fajarf1395 o ya ya.... mantapp
thanks a lot man
What if you did this with a pokemon card
Same question
I use a glass cup, without the heat and just let it dry...that iron method is too risky!
Uwwoww bs ni
Eh ada om paung🤣
Awesome!!
Pake air kah itu om
pake cairan apa min
Itu pake cairan apaa
Cairan apa itu bang
Itu cairan apa mas yg di pake?
pake cairan apa itu
Di kasih air ya itu
Release it
pake air?
Don't try this on SW Vintage Collection.
Itu di olesi apa sih?
Air putih om
Mantap
Trmksh om sudah mampir hehe
@@fajarf1395 mampir juga ya, saya baru mulai juga konten diecast nya heheh
Wow that’s awesome
Thankyou :)
Oh woah
Udah saya coba gak berhasil 😂
Gimna hasilnya
@@fatwaa1362 tetep petir
Fake
Apa itu, pakai air biasa atau pakai apa?. Kok gk ada keterangan