I would try to open it up, disconnect it from it's battery and remove any remaining water first. Regardless if you open it or don't want to then the usual best practice is to leave it in an open air for few days to dry (not on a radiator, just let it dry by itself). In worst case scenario if it still doesn't work what helped with my devices it to open them again and swab the disconnected curcuitboard with pure alcohol and wipe it down. This should remove any conductive paths that remained from the impurities in the water (the softer water you have the better chance of recovery 😁).
@@pandaengineering i tested the right analog with gamepad tester website, and i saw that the analog works, it just have a huge delay. So if i clean the dust inside, it might help?
It may work or maybe it has problems because of the pairing mode it's in. Keep in mind that manual has at least 8 modes the gamepad can be paired (home+each face button). When I changed the modes, I had to remove the device and pair it again.
It turns out i figured out my problem, the problem is not the analog, but i think its the wire or cables inside because when i spread out the controller to place my phone, thats when the problem happens. Just one last question 😅, Do i just need to open the controller and fix the positioning of the cables? Your answer make me confident to open my controller, hoping it might fix it. (i really love this controller, and its quite pricey 😅)
![[1209] This Tiny WiFi Camera Owns Kwikset SmartKey (LockTech LTKSD)](/img/n.gif)
pls to up the light display?
The thing that you called speaker is the vibration motor
Bought same watch. Same problem didnt charge. Throw watch on the floor. Now its working :D
What was the floor? Hardwood or tile?
really?
Thank you man you're the best thing ever
You made my life 10 times easier 🤩❤❤🔥
Just clean the contact-points
What should I do if I washed my hands and water get into it?
I would try to open it up, disconnect it from it's battery and remove any remaining water first. Regardless if you open it or don't want to then the usual best practice is to leave it in an open air for few days to dry (not on a radiator, just let it dry by itself). In worst case scenario if it still doesn't work what helped with my devices it to open them again and swab the disconnected curcuitboard with pure alcohol and wipe it down. This should remove any conductive paths that remained from the impurities in the water (the softer water you have the better chance of recovery 😁).
Problem: it says drive disconnected
the right analog of my ipega red knight is broken, can you pls make a vid on how to fix it, pls im begging i really need your help 😭
Sorry, I have no idea apart from replacing whole analog stick. If it works from time to time, maybe use a contact cleaner?
@@pandaengineering i tested the right analog with gamepad tester website, and i saw that the analog works, it just have a huge delay. So if i clean the dust inside, it might help?
It may work or maybe it has problems because of the pairing mode it's in. Keep in mind that manual has at least 8 modes the gamepad can be paired (home+each face button). When I changed the modes, I had to remove the device and pair it again.
@@pandaengineering thanks for the info, it helped me a lot, you earned a sub 😁
It turns out i figured out my problem, the problem is not the analog, but i think its the wire or cables inside because when i spread out the controller to place my phone, thats when the problem happens. Just one last question 😅, Do i just need to open the controller and fix the positioning of the cables? Your answer make me confident to open my controller, hoping it might fix it. (i really love this controller, and its quite pricey 😅)
I want helpp
I have same problem
Bro i have same problem
3:20 that's the vibra- umm.. lol
not worth effort