Ultrasonic Range Finder Sensor DIY by ICStation
Вставка
- Опубліковано 9 вер 2024
- This KIT using Ultrasonic Waves (40KHz) to measure obstacle distance!
► Buy this KIT: bit.ly/33ZZOGz
● 15% off Discount Code: 91ics
The ultrasonic range finder sends a 40KHz ultrasonic pulse through the ultrasonic transmitter, and receives the transmitted echo with the ultrasonic receiver.
*Watch the video carefully at point 6:20 to avoid confusing the 0.1uF (104) capacitors
Visit ICStation: www.icstation.com
► For any questions ask me in the comments!
■▬▬▬▬▬ LINK & Support ▬▬▬▬▬■
Watch another video =)
● Halloween 2019 Ghost: • DIY Halloween Ghost (3...
● Water Level indicator: • LED Water Level indica...
● Police Light: • Police Light DIY with ...
● Electric Field Detector: • How to make an Electro...
● Vu-Meter Stereo: • Vu-Meter Stereo -20 +3...
● Traffic Light: • Make your own Traffic ...
● Vu-Meter 40 LED: • Vu-Meter 40 LED on PCB...
● Automatic LED Light: • Automatic LED Light ( ...
● Voltage Detector: • AC Voltage Detector DI...
● Music LED with TIP31: • Make Music LED with TI...
● NE555 Signal Generator: • NE555 Signal Generator...
Follow me
- UA-cam: / stefano91ste
- Instagram: / stefano91ste
- Pinterest: www.pinterest....
■ If you'd like to support the channel: Like, Subscribe, Comment and Share my Videos :)
■ Do you want to Make a PCB?
Look this: • Vu-Meter Stereo -20 +3...
WARNING: This video is only for demonstration. I don't take any responsibility for damage to things, people and animals.
#Ultrasonic #Sensor #DIY
Great! Thank you very much to upload this video! You have marked each components clearly, and good reminder us to avoid confusing the 0.1uF (104) capacitors
Thank you for this Kit ICStation 😁
Thanks for this, I was about to be caught out with the film resistors. Your video also helped me get the Sony part the correct way around also !
👍👍👍
Thank You!:)
Thank you so much for this Information Stefano! Boris🇨🇭
Thank to you Boris 😎
hii thank you for good videos. and i am wondering. in that STC11F02 chips there are need programming? or can i use STC11F02 with out programming?
thank you
Kyaa app reverse engineering krke isko ghr pr ckt diagram kr sath bna skte hai
How much it cost (roughly) ?
Hi. 5.24$ now on ICStation (link in video description)
1 like 😃😃😃😃 Good vedio
❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
DRS SOUND Thank you! 😎
Good!
Thanks😎
Ciao Stefano! I have Build to sets of this Kit from icstation and both are not working correctly. Don‘t know why. Sometimes the digits are showing very strange and incorect numbers or they‘re showing nothing. And also strange beeping sound. Did you have no Problems at all with it? Maybe I could send you a Short video of what is going on. Best wishes to you, Boris. 🇨🇭
Hi Boris!
What do you mean by strange beep? Feel free to send me the video on the email or a link to the video here, as you prefer. Mine worked right away as you can see in this video, the only thing to pay attention to were the two sensors, one TX and the other RX.. I don't think there was anything else :)
Best wishes you too!
Max Range?
Hi, max range is up to about 30 cm
great work, what is the voltage do you supply to it?
Thank you, i supplied with 5V (It supply voltage is DC 4.5-6V)
Thanks for sharing
which software you use to make pcb files
Hi Edmorbus,
Thank you for appreciating my work. I use Sprint Layout 6 to make my PCBs.. but this project is not my PCB, is a commercial diy kit :)
@@Stefano91ste ok thanks
කොහොමද යාලුවනේ 😃😃😃😃😃😃😃😃 අපේ පැත්තෙත් එන්න
📣📣📣📣📣📣📣📣📣📣📣📣📣
So I could install this on my wife's car so she will finally stop backing into other cars?
Hahaha xD
hy friends whatsapp? o email?
Beep is very annoying
You're right, maybe it would have been better to leave the sticker on the buzzer