How to replace Clockspring (spiral cable) for 2007-2013 TOYOTA TUNDRA
Вставка
- Опубліковано 7 вер 2024
- Air bag, cruiser control Clockspring spiral cable
2007-2013 TOYOTA TUNDRA
"This channel and I do not claim any right over any of the graphics, images, songs used in this video. All rights reserved to the respective copyright owners."
Excellent video and straight to the point. Not a word spoken and it was clear as day. Thanks, it went exactly as your video and now I have a horn and cruise control working again. AAA+
You’re welcome bro🙏🏻
Best instructional video ive seen in a long time! Great work! Love it when you get right to it. A+
Thank you 🙏🏻🙏🏻
Thank you🙏🏻
Great video! I followed all the steps in the video, and this helped me a lot with replacing the clock spring in an ‘08 Sequoia. Thank you!
🙏🏻
Another 08 Sequoia about to get the same treatment thanks to this vid! Thank you!
Video was spot on for me as well. Where I should have had the Phillips screws holding the upper and lower plastic housings together, some dimwit used wrong sized place holder torx screws. They didn't fit, didn't bite, but I put them back in regardless. My 2007 Tundra has 290K miles on it, and my cruise control still worked, but my horn didn't work and the airbag light was on. Only thing I'd add as advice...disconnect the negative cable from the battery when working on an airbag module. ;) Took me 20 minutes start to finish to make the repair.
Great Video, quick and accurate. Worked for my 2009 Landcruiser!
Dude thank you so much!! Your video made it super easy to change out and now my horn works again! 2013 Tundra 4.6l with 78,000 miles
Simple as can be. Good video. Thank you.
You’re welcome 🙏🏻
Donde vive para arreglar mi troca sobre ese problema ?
Just did mine and all of 20 minutes of work. Thanks!
Very helpful. Thank you for taking the time.
Video was spot on! even the locations of the release clips shown in the video made the replacement soooo easy! Thank you
this is an awesome video very short informative and time saving for everyone who are looking to change this spiral cable
Perfect instructional video! Love your style, my man.
Thank you🙏🏻
Awesome video!!!! Straight forward and it was as easy as you made it look, thank you.
Thank you very much for the good video !
By the way great video. Was supper easy to do. Helped a lot.
Thanks man! Horn works now thanks to you!! 👊
You ARE the Professor! Thumbs up!
Any guidance for how to get the airbag light to go off after replacing the clock spring? Great video! Thanks!
have you tried clearing codes with scan tool that can read airbag codes
Thanks for the video! Just a couple questions. Airbag light came on and blinkers don't snap back after the turn. Any ideas? Great video, thanks.
Does the steering wheel nut need to be installed with an impact drive? and is there a specific torque rating? Great video BTW.
Great video. Now can you make another on how to put the steering wheeling back on Straight? 😑
Hi, great vid. About to start working on our Tundra. Would we still need to disconnect batt first or not needed? Thank you
Thanks 🙌🏻
You’re welcome 🙏🏻
Do you have a link to the new clock spring?
My 2011 corolla cruise control doesn’t work, the light is on when turning the steering and stays on but cruise doesn’t engage, no airbag light and horn works. Any suggestions? Should I change the clockspring
Bro, many things can be the cause, I can't say yes but if you want to try changing, go ahead👍🏼
Are there torque settings on the steering wheel nut? 2013 Tundra 5.7?
You bought an OEM replacement or other after market part? If after market, what brand and where did you purchase? Is it still working or any other problems?
Sorry late response,
My Costumer bought this part from ebay $35
Brand ISUMO, Made in China,
i don’t know for the quality, he he he
@@pacetansasonny_soei2515 I ended up buying one from EBay also, which was $14 and was every bit as good as the original.
My cruise control works but my horn doesn't work unless the steering wheel is turned. Is it the same problem? Great video. I think I can do this.
Blue wire goes top left slot of the cruise control connector..make sure it's in that hole good. My metal piece end broke but It still worked for me.
My steering wheel seemed straight when pickup was off, but when I drive it seems it's to the left some. I'll need to take off and move to.the right some.
Yea I just did mine and it is off just a little as well did you end up doing it and did it work?
@@steelers454 yeah I took it off again and moved it a little. Seems to be pretty good to me.
Yea I just did mine as well pretty easy. I got my straight also. Just stinks to have to take the battery cable back off and lose everything again lol.
@@steelers454 I know!
Your steering wheel removal tool was your fist you might want to clarify that LOL
Did the customer have any other symptoms besides cruise control not working?
Yes, Cruise Control is not working 👍🏼
Hello dear, I have the same 2008 Tundra model car. My mullet gets damaged, and every time I change a piece, it gets damaged in a week or more. Are there reasons!! Is there a correct way to install!! Can you help me bro, thank you
hey mate is that the same as Toyota Highlandar or kluger TIA
This part fit/same for:
2004-2006 LEXUS RX330
2004-2009 TOYOTA PRIUS
2005-2007 LEXUS GS430
2005-2012 TOYOTA AVALON
2005-2013 TOYOTA TACOMA
2006 LEXUS GS300
2006-2008 LEXUS RX400H
2006-2010 LEXUS IS250
2006-2010 LEXUS IS350
2006-2012 TOYOTA RAV4
2007-2009 LEXUS LS460
2007-2009 LEXUS RX350
2007-2010 LEXUS ES350
2007-2010 LEXUS GS350
2007-2010 LEXUS GS450H
2007-2011 TOYOTA CAMRY
2007-2013 TOYOTA TUNDRA
2008 TOYOTA SEQUOIA
2008-2010 LEXUS GS460
2008-2010 LEXUS IS F
2008-2010 LEXUS LX570
2008-2010 SCION XB
2008-2010 SCION XD
2008-2012 TOYOTA HIGHLANDER
2008-2013 TOYOTA LAND CRUISER
2009-2013 TOYOTA COROLLA
2009-2013 TOYOTA MATRIX
But i am not sure the same for do.
is this the same as a 2010 sequoia ?
Yes👍🏼👍🏼
2:08 how did you remove the connector so easily?
My horn stopped working and was told this is the issue. Would replacing the clockspring fix a horn?
Yes sir👍🏼👍🏼
I decided not to rent the steering wheel puller. I was tugging on it with a lot of force and when it finally came loose it hit me in the face lol
Did he disconnect the battery
Yes, sir🙏🏻
@@pacetansasonny_soei2515 weied, seemed like the horn was working......