The construction method was similar to Kumkang Kind which i work for nearly 10 years. Compare to conventional method which are using plywood, wood and nails, this method was really fast which is 3 to 4 times faster. As my experience, normally we manage to raise 4 level per month easily. And for an Apartment that have 10 level, it just take 1 year to complete it all from concrete to finishing (painting, installing windows, doors and tiles).
The actual problem is the electrical conduit for outlets, lights, switches not to mention the pipes for fresh, gray and black water that should be very very carefully planned and have several extra just in case because once the concrete is poured there is no way back and to run a cable or a pipe on the face of the wall just doesn't look good. I can see the cost savings. I have seen first hand a building being built with a very similar system and I use to work in the building after it was finished. It was a 3 story restaurant and they did it very fast when started. I have no idea how long the planning took.
Saw the power boxes, but where do the wires run? Plumbing? Put together, take apart, it most add to the overall bill. I think the foam block system would be better.
The advantage with this over polystyrene block concrete builds is that this can do the floor and underlying walls at the same time. Possibly also the door and window openings are way easier and better with this sort of Alulinium system compared to foam blocks. Maybe the extra cost doesn't isn't justified by the few days of time you may win with that as it only workds for few story residential buildings anyways. You can of course just run the pipes and pour the concrete over or grind the wiring in later but this is a thing with almost all kinds of construction isn't it?
Дороговато выйдет такая алюминиевая опалубка. Это подойдёт для типового проекта массового строительства. У нас в России такие технологии не нужны, воровать на строительстве станет тяжело прорабам и всей начести, что кормяться этим. Только индивидуальный проект для честных застройщиков. Но тут круг замыкается )))
It is only for a few floors, residential though the aluminium otherwise zouldn't hold the load of all the floors while the concrete sets. Otherwise your building takes too long to comlplete. At least that's what I think. Very interesting, cool concept. Full concrete construction is great for soundproofing, fireproofing, durability etc. To optimise it just needs a good thermal insulation system that at the same time reuces the amount of concrete needed. You can of course just insulate the outside against the concrete but it would be nice. Maybe this is more cost and few advantages over foam polystyrene block concrete builds or is it? Maybr doorways and stairs are better and easier with aluminium concrete formwork? I would ike to see them compared.
Where are the insulation, plumbing, electric conduit, Airconditions, etc..? The external vibrator will not reach down the bottom of these tall walls!. Pouring concrete should be done on stages ( at least 2 ) . But the idea can be modified/ improved.
In the Netherlands there is a old lighthouse which was built this way. They had a small mould which they moved upwards after each pouring of a bit of concrete.
And after 10 million working hours the house is ready. (huge cost). Oups i need to change (add /remove) a wall socket. Eh sorry it is veeery hard what you ask (more cost). Would it be better to use pre fabicated panels?
and why we need so heavy duty walls ? Is any tank going to rush to my house ? And is it good to have so big load for the concrete slub ? And what about thermal insulation / moisture absorption etc ? Just take a look at SIP houses (speed / insulation / etc etc)
Das ist kein Haus aus Aluminium sondern eine wiederverwendbare Giesform für ein Haus komplett aus Stahlbeton. Sind wahrscheinlich aufnahmen aus Japan, wo so ein Haus sicherlich größeren Erdbebenschutz bietet.
Very great, quick , precision, and strength..very expensive cost..but labor wage in there very expensive, time is money..i think the end of calculation more efisien this method..
It's all nice and clean at the start. Wait tell you get dried concrete on them. But I like it alot. Save on your body. 1 out of 10 10 being the best it gets a 10.
TheSaeed111111, чтобы “коммуникации” совместно с закладными “трубные каналы” благополучно перемололо щебнем, валящимся с трёхметровой высоты при отливке этажа целиком. Чтож, «рацуха» зачётная! Гениальность прям сквозит. Воистину оптимизаторский подход.
normal sa lindulin lugar solid concrete. gaya sa japan. ang mahal un forming materials pwede naman plywood bakit aluminium pa maraming cuts and drills in different measurements ang gagawin mo dyan. kung i reuse mo sa ibang bahay panibangong sukat uli. at walang column at beams yang ginawa nila
@@ivanshabalin2489 кретин гугли аренда опалубки и фанеры для опалубки, фанера с 10ок раз используется на различных объектах, есть как на стальных таки и на алюминиевых каркасах , по вылазят мамкины мажоры с дивана которые ничего тяжелее пениса не держали и протирают штаны в офисах и заявляют потом авторитетно
у меня только один вопрос - какой марки бетон, что он сам затечет во всю конструкцию и как они его вибрируют для усадки? потому что бетон, который залит без вибратора - бетоном не считается
It looks pretty easy, but i would have liked to see a real world example, where construction elements have difficult configuration tuat does not match with you standard formwork element dimensions, this building looks like it has heen made with the exact dimensions to match formwork dimensions, which we all know that it hardly ever found on sites
The forms are genius, but that "BREAKING NEWS!" music from the 1980's is driving me up the wall.
I love this kind of product. I wish I had the money to invest in a full set of forms & build in hurricane prone areas.
это не опалубка, это МЕЧТА любого застройщика ))))
Однотипных домов можно штамповать!
После 3-х заливок это будет мусор, хлипкий конструктор.
The construction method was similar to Kumkang Kind which i work for nearly 10 years. Compare to conventional method which are using plywood, wood and nails, this method was really fast which is 3 to 4 times faster. As my experience, normally we manage to raise 4 level per month easily. And for an Apartment that have 10 level, it just take 1 year to complete it all from concrete to finishing (painting, installing windows, doors and tiles).
I'm confused since you have experience with this I'll ask you , these molds do they get removed after the cement drys ?
@@recklesslove2880 of course they remove it once the cement dry.
@@shinobi1804 thanks .
I think it will be hard to be adjusted after the concrete dry out. For example, remove a specific wall between two rooms.
Circular saw can do it.
The actual problem is the electrical conduit for outlets, lights, switches not to mention the pipes for fresh, gray and black water that should be very very carefully planned and have several extra just in case because once the concrete is poured there is no way back and to run a cable or a pipe on the face of the wall just doesn't look good.
I can see the cost savings. I have seen first hand a building being built with a very similar system and I use to work in the building after it was finished. It was a 3 story restaurant and they did it very fast when started. I have no idea how long the planning took.
Saw the power boxes, but where do the wires run? Plumbing? Put together, take apart, it most add to the overall bill. I think the foam block system would be better.
The advantage with this over polystyrene block concrete builds is that this can do the floor and underlying walls at the same time. Possibly also the door and window openings are way easier and better with this sort of Alulinium system compared to foam blocks. Maybe the extra cost doesn't isn't justified by the few days of time you may win with that as it only workds for few story residential buildings anyways. You can of course just run the pipes and pour the concrete over or grind the wiring in later but this is a thing with almost all kinds of construction isn't it?
молодцы , нечего добавить!
Electrical boxes are installed, but where is the conduit for the wiring?
shh... don't worry about it.
They already had piping for wires which was concealed along the reinforcement bars....
Was wondering the same thing. Probably transmitting electricity through the air, Tesla style.
Musch halt durchn Beton Schlitzen
You just stick the cable in-between the bars and into the box
These are good, I'm fed up of steel and wood frames. Rusty and filthy, easy to break. And they are heavy!
Heavy is more like it. The key to success for future technology is less weight, which means less energy used in moving the required equipment.
ICF ("insulated concrete forms") uses foam. Even lighter.
this kind of forming is neat but way tooooooooo expensive
Strong but free from labour,wastage,bricks,plastering etc. V good innovation
Могли бы сразу и провода тогда заложить...и на опалубке сразу обои растянуть, чтоб потом не клеить...
Электрика по идее уже проведена, а обои это конечно может стать хитом!
Дороговато выйдет такая алюминиевая опалубка. Это подойдёт для типового проекта массового строительства. У нас в России такие технологии не нужны, воровать на строительстве станет тяжело прорабам и всей начести, что кормяться этим. Только индивидуальный проект для честных застройщиков. Но тут круг замыкается )))
It is only for a few floors, residential though the aluminium otherwise zouldn't hold the load of all the floors while the concrete sets. Otherwise your building takes too long to comlplete. At least that's what I think. Very interesting, cool concept. Full concrete construction is great for soundproofing, fireproofing, durability etc. To optimise it just needs a good thermal insulation system that at the same time reuces the amount of concrete needed. You can of course just insulate the outside against the concrete but it would be nice. Maybe this is more cost and few advantages over foam polystyrene block concrete builds or is it?
Maybr doorways and stairs are better and easier with aluminium concrete formwork? I would ike to see them compared.
This is the very best formwork video I have ever seen
no columns and beams all walls and yet its the best ever? way tooo expensive for forming too
If you need any aluminium formwork and scaffolding, pls contact me. jack@geto.com.cn
wow!!!! just 12mins to finish a house.. amazing
地盤用緊 一搬用三十層塊鋁板就甘不多玩完，同埋要吋常剷模，唔剷就算落左板模油都會出現大量沙眼。
Thickness of walls is 5 mm with copper 0.2 mm wire inside?
Where are the insulation, plumbing, electric conduit, Airconditions, etc..?
The external vibrator will not reach down the bottom of these tall walls!.
Pouring concrete should be done on stages ( at least 2 ) .
But the idea can be modified/ improved.
How long did this floor take?
How many days floor cycle?
If you need any aluminium formwork and scaffolding, pls contact me. jack@geto.com.cn
How do you install plumbing and electrical inside the walls?
Before pouring concrete
That music is from a 70s day time tv I’m sure of it 😂😂😂
In the Netherlands there is a old lighthouse which was built this way. They had a small mould which they moved upwards after each pouring of a bit of concrete.
ua-cam.com/video/K67j5juf-V4/v-deo.html
That is known as slipform technique or climbing formwork
*Now I feel like going for a run or something.*
pump some concrete weights
It's going to be a great day tomorrow! Things are looking up!
And after 10 million working hours the house is ready. (huge cost).
Oups i need to change (add /remove) a wall socket. Eh sorry it is veeery hard what you ask (more cost).
Would it be better to use pre fabicated panels?
and why we need so heavy duty walls ? Is any tank going to rush to my house ?
And is it good to have so big load for the concrete slub ?
And what about thermal insulation / moisture absorption etc ?
Just take a look at SIP houses (speed / insulation / etc etc)
Nice invention. Prefab-home on the same location as the building itself :-)
Comes from a US company wall tie.
Das ist kein Haus aus Aluminium sondern eine wiederverwendbare Giesform für ein Haus komplett aus Stahlbeton. Sind wahrscheinlich aufnahmen aus Japan, wo so ein Haus sicherlich größeren Erdbebenschutz bietet.
Very great, quick , precision, and strength..very expensive cost..but labor wage in there very expensive, time is money..i think the end of calculation more efisien this method..
It's all nice and clean at the start. Wait tell you get dried concrete on them. But I like it alot. Save on your body. 1 out of 10 10 being the best it gets a 10.
What computers are running their CAD programs? Something from 2005? It looks like it's running at 5 fps....
just awesome. solid concrete
all my question has been answered in a video. nice one
The rebar diameter is too small. and concrete walls are too thin. the structure of the house is too weak.
Probably it will meet the regulations. Many buildings are way stronger then needed.
Thinner than dry walls in America?
no the size of the rebar and wall are all good for 2 story house. the problems are i dont see column and beam
where are the columns and beams? dont tell me the support of this house are only the walls?
уже и с подрозетниками ,молодцы !
تحياتي للشغل الذكي
تعالوا عندنا في المملكة العربية السعودية
في شغل كثير ياصديق
Interesting concept and very versatile product, I wouldn't want to live in one though. Whoever thought this music was a good idea needs replacing.
How much does it cost to build this house ?
can you rent it as a kit make your pours and return it? how much is the kits, the site is not legit..
How many floors can be built like this
Any cost advantage compare with traditional construction
What is the life of this constructions
Currently our government (tdp) has started this project for ...cost will decrease but time will save
A good way to reduce wood use in construction. And aluminium panels are reused many times
Supply is there in Alibaba ... For India.
Will be cost effective & save time.
再看一次影片工地好乾淨沒有雜物真的是化繁為簡以後想要的房子就是這種型式，請問一下，一坪建造費用，要多少錢？
full concrete house...... cost reduction only on how much worker when build
its also solid. and would last even if you die 4x
I was thinking wtf until the concrete went in :D
The rebar was an early tip off.
excellent job and team work.
Hmm didnt se any tubes for the electronic boxes connected.
Можно было сразу коммуникации проложить, или хотя бы трубные каналы, а не только подрозетники
TheSaeed111111, чтобы “коммуникации” совместно с закладными “трубные каналы” благополучно перемололо щебнем, валящимся с трёхметровой высоты при отливке этажа целиком. Чтож, «рацуха» зачётная! Гениальность прям сквозит. Воистину оптимизаторский подход.
So the formwork is reusable? Nice.
Aluminum melts at 600 degrees centigrade, beats steel, while wood may need frequent changes as more boards warp up.
How much it will cost for double bed room home
Excelente video buen trabajo 🍺🍻🍺🍹🌮🌭🍕🍟🍔🍗🍖🍻🍺🍹🍺🍻🍻🍺🍹🍹🍺🍺🍻🍺🍺🍹🍺🍻🍺🍹🍹🍺🍻🍹🍹🍺🍻🍻🍹🍹🍺🍻🍻🍻🍻🍺🍺🍹🍹
I need buy one of this how much will it cost
solid concrete for walls? good but looks expensive..
normal sa lindulin lugar solid concrete. gaya sa japan. ang mahal un forming materials pwede naman plywood bakit aluminium pa maraming cuts and drills in different measurements ang gagawin mo dyan. kung i reuse mo sa ibang bahay panibangong sukat uli. at walang column at beams yang ginawa nila
Do you have suppliers in Philippines?
how long is take for bulled this building ?
What a mazing brains they have...fantastic
За то время пока они собирали эту алюминиевую опалубку, можно было из обычного кирпича сложить две коробки для такого дома.
Интересно а за сколько по времени из кирпича собрать такую коробку пятерым мастерам?
the music is kinda legend of Zelda, btw good video
This is very interesting sir now i am learn it sir
Super, if compared with brick or hollow block is this method cost effective?
How many floors can be built?
Классная технология! Жалко у нас в России так не строят, ведь это на века!
Иван Котов , ага, одноразовая деревянная опалубка
@@ivanshabalin2489 кретин гугли аренда опалубки и фанеры для опалубки, фанера с 10ок раз используется на различных объектах, есть как на стальных таки и на алюминиевых каркасах , по вылазят мамкины мажоры с дивана которые ничего тяжелее пениса не держали и протирают штаны в офисах и заявляют потом авторитетно
good ol house of rock amirite?
เจ๋งจริงๆอยากมีบ้านแบบนี้จังเลย
Without breaks, only chips and concrete, it's costly right?
No, it is not
Because the target is to make it fast.
Which reduces labour and time.
And you know time is money.
@@souravbarman1800 then what you say it is cheaper then use break
@@souravbarman1800 if yes then how much cheaper in percentage explain..
Hi, when do you attach the hose for copper lines? Also I didn't see the sewer system. Or this was only a demo?
Was really expecting TJ Hooker or Magnum PI to run onto the scene telling everybody to get down
How much for that complete set USA Ohio delivered?
模块化打印生产之前没出来国人有这么先进的模板技术！我顶
There is a reason why there is PERI and DOKA ;-)
Do you train how to use these forms ?
Вау! Супер просто супер конструкция!
I felt like Chuck Norris was about to come on screen..
Hi, how long does it take to finish formwork, all this process?
I don't see water pipes in that building...
neither see electricity piping.
Deshuttering time for wall pannels?
Welcome to LEGO AGE...🏗
Good one
Nice job super engineering
Wow.. electric friendly
see full video before commenting. It makes you see less stupid.
great, whats the cost?
The video is not complete. What about all those support struts holding up the ceiling -- they're still in place.
классно! Интересно какова стоимость 1 м2 форм вертикальной и горизонтальной поверхности
Я так понял, это Япония. С их сейсмикой точно дешевле, чем каждый год новое строить, но у нас такой дом золотым будет.
@@medant80 идиот они заливают в формы бетон и потом их снимают.
По надписямь это китай
пластиковая опалубка подобной сборки когда-то стоила 100 баксов за щит в 1 м.кв. Алюминий, думаю, мало чем уйдет от пластика.
@@Висталь.байВикторЯковлев алюминий будет долговечней, можно довольно много домов построить
Nice, but looks expensive
The aluminum is only for forming the concrete ... Did u watch the whole video ?
@@TheDukanu Can you suggest more videoes.
very nice job.......
Hi
How to buy this one
Why drive out the steel ties? What's the point?
you can make any molding on the walls.
I m doing it with plywood. This is bomb proof structure.
no its the same its just neat and way too expensive. why make it perfect in one go? for sure they will plaster it after
у меня только один вопрос - какой марки бетон, что он сам затечет во всю конструкцию и как они его вибрируют для усадки? потому что бетон, который залит без вибратора - бетоном не считается
У меня встречный вопрос - ты мотошлем снимал когда ролик смотрел?
Fantastic new sistem construction..concret..home
It looks pretty easy, but i would have liked to see a real world example, where construction elements have difficult configuration tuat does not match with you standard formwork element dimensions, this building looks like it has heen made with the exact dimensions to match formwork dimensions, which we all know that it hardly ever found on sites
Superman music. Heroes in action.
Where can I rent this equipment in America? 👍🏼👍🏼👍🏼
Where can I get this aluminium formwork?
I need the whole set..
So what are the benefits, drawbacks, cost etc...
Doka had this 10 years ago. Its only good when the working force is cheap
Is it more laborious than wood construction or brick, block? Can't be can it?
很棒，除短裤和运动鞋比较扎眼，整体上视频质量很高。
very smart work and very clean
Отличная технология.
Thank you for the useful information.
where is the plumbing and electrical
Gracias por compartirlo un saludo 👍
Excellent musical decision