SubiSpeed - JDM Front Grille Install - 2015 Subaru WRX and STI
Вставка
- Опубліковано 6 сер 2014
- Find out More: www.subispeed.com/products/91...
------
We just got in the JDM Front Grilles for the 2015 Subaru WRX. We go over installation and front bumper removal for this cleaner JDM look!!
------
Snapchat - Subispeeddotcom
Twitter - / subispeeddotcom
Instagram - / subispeed
Facebook - / subispeed - Авто та транспорт
Went to the dealership and asked them to do this for me and wanted to charge $300+. I watched this video and did it with my boy and only costed me an Empanada lmaoo
You guys at Subispeed do a great service to the whole enthusiast community by making these super clear instruction video's, All I can say is thank you very much, this empowers people to try and do it by themselves and builds a lot of confidence along the way to tackle even more difficult projects.
Took me 20 minutes doing this by myself. Thanks for the great DIY video! I didn't even have to undo the light cables as there was enough space between the car and the bumper cover to undo the screws snd remove the grill.
Had to like this! "Overnight parts from Japannn." Will be getting the grille, after I recover from the last purchase I made from you guys earlier this afternoon...
Thank you for the tips about lining up the 3 bumper bottom tabs first, that was a life saver as I was having alot of issue getting the bumper to snap back on to the bumper tabs near both of the fender
Thank you! You guys really add so much more than just products to the community, for that....I will be a customer shortly.
Thanks for this video! It showed nearly every step needed for my JDM grill install. There was a extra step needed to remove the wiring loom from the bumper on each side but it came off without incident.
Best videos ever!!! My favorite channel to watch!!!!!
put it on my tab at Harry's
JDM grille goes good with those new lights you guys have that go behind the grille
If you remove the c-clips from the inner fender (front wheels removed) you can access the turn and fog lights to disconnect before fully removing the bumper. To me this is an extra step but you don't have to worry about wires being pulled off.
I don't get why people don't just keep the stock stuff around?
You guys have got some great videos, very helpful. Thanks.
Nice looks sweet. I will definitely look into getting one of these.
Looks Great. I bought a 2015 Satin Pearl BRZ and why Subaru/ Toyota did not design these with a mesh grille was a bad idea. The Mesh Grilles look incredible on the WRX and BRZ. Anyway, I am trading mine in next year for the WRX STI which I wanted to begin with but had to wait 6 to 8 weeks and my kids talked me into the BRZ which I had in 2 Days...
Just got mine. ;) So excited.
Nice song with this video. Might have to get this grill lol
What is with the bug guard thing on the bottom? Is it necessary or can it be removed for a cleaner look?
Thanks.. used this to help install the front view oem camera on my 2019 WRX
MtnXfreeride is it compatible with 2019 wrx cuz On site it says 2015-17
ive got a front lip installed does this mean i have to remove that to get to the c clips underneath ?
Are the c-clip removers that was used the same kind hat are sold for upholstery?
If someone already asked..... I apologize.
the wrx and sti comes with these stock in australia, think only USDM has that
Like the JDM grille much better. Nice video Yo (informative yet fun too).
I want this grille but I have a question. Is the emblem the same size on this grille? I have a black/red emblem on the back and I would want to switch out the blue to match
i noticed the engine cover is off. is it because it breathes better? cuz i wish thinking of taking it off.
Do headlight washers next since you guys sell the covers. It’s a JDM exclusive thing
Can I remove the OEM sti badge and install directly onto the new JDM grille?
Are these back ordered? I have been waiting for my confirmation for 6 days now...
Where can I get that c clip removal tool?
Definitely gotta get this grill
Do you know the part number of the fastener clip you took off at 1:50? Thank you!
No need to fully remove bumper. Just remove top fasteners in engine bay and top side fasteners in wheel well. Then, lower top end down. You have more than enough access. I used a stubby Phillips screwdriver to remove/install screws. Great tutorial though, as always.
rckstdy013 thankyou i'm watching this vid because ive got a wrx emblem badge i want to install on the grill and i just could get enough space from inside the engine bay to getvmy hand behind it so i thought i'd have to take off the bumper just to install a little badge your comment gives me hope i don't have to take off the whole bumper !
I'd like to see the mesh grills on your site installed on a white STI.
If OCTurboJoe gets one of these. He may do a vid. He has a white 2015 sti :)
what are the remixes of the songs used? i cant find them
Thank you so much! I love your videos! Bought my 15 STI in January and recently hit the biggest opossum you've ever seen! Basically punched the lower grill loose inside the cavity. It's still completely intact, just loose inside. It looks like there are clips all around for it to click back in, but I don't see a way I can do it from the front. I had a hunch I was going to have to remove the front bumper to access and put back in place the lower grill. If so, this video is going to be a great tool to help me do it myself! GOT ANY ADVICE FOR ME? Thanks again!
metfan16 Just go slow and grab a helping hand if you can!
SubiSpeed will do! Thanks!
Do you have the factory short throw shiftier?
I hang my stock grill above my bed. It's actually a great piece of decoration
+Rufio In You are clearly not married. haha
@@richb7414 LOL i was just thinking the same thing
Will this fit a 2018 WRX? Please does anyone know?
How can i get the STI grill badge on this?
How much horsepower does that add?
Is this doable by yourself?
I ordered one from you guys and it just arrived and came with an extra bracket. The video doesn't show that part of the install, can you please elaborate or provide details on how the bracket is used?
Joe Labrie the extra bracket isnt required there is already one installed on the bumper of your car.
that was quick, thanks!
Stock is nice and fine
Can I re use the STI emblem from my USDM grille? It should just unbolt right? I don't want to have to remove the bumper twice just to check.
Yes it unbolts.
SubiSpeed Great, thanks! I'll be ordering one soon.
Awesome. Got my answer here after reading more. Lol. Thanks.
can you guys do a video on installing the hella horns
We have a special mount, wiring and etc coming out soon for the horns. ;)
@subispeed when? could you provide an eta by any chance? Keep up the good work
Nice . I'm gonna order soon with your hella horns
Wait for it... we have something special coming out for the horns.... ;)
When is this new surprise for the hurnz tgat you have coming up? Is it out yet
@subiespeed
Does this grill have a glossier finish than the stock one?
Aubrey de Jong Yes, it matches the JDM S4 Fog Light Bezels.
Will you guys be selling lips in the future?
I prefer the stock grill .. on the top portion there are larger air flow openings. But that's me.
" toothy grin " lmao!
Is there a functional reason why these grills are different?
+mobeatsfoyall no
Is the spacer I received with my order just a spare part?
Yes, there is already one installed on the car.
Would this work on a subaru legacy like 2015 and above? looking for a newer grille for a legacy if possible.
No, these are completely different from the Legacy.
hmm gotcha. you sell the c clip remover tool? i know flat head screwdriver works also.
Dominic Montague ?'
Mm.
I
Are the screws for 2015 grille the same for 2018 grille?
Yes, should be the same.
Don't forget us girls!
do you guys have anything for lower grilles?
Yes, there are some mesh style options available.
www.subispeed.com/2015-subaru-wrx/exterior/grilles/subispeed-lower-grille-for-nbr-challenge-style-upper-grille-2015-wrx-2015-sti#.V5nyWfkrKrw
SubiSpeed what kind of wheels are those?
Huy Nguyen they're these:
www.subispeed.com/2015-subaru-wrx/wheels-and-accessories/wheels/wedssport-sa-10r-blc-18x-9-5-38-r-face-2015-wrx-2015-sti.html
=)
can i use my sti emblem on jdm grill?
Following..
Sorry but in my opinion the result is not worth the work and the money. It looks real good but not much different to the stock one!
rolexr good thing it’s just your opinion
Where is my exhaust at its been a month wtf
Did you ever get your exhaust?
US one is fugly w half done mesh. While that bumper is off Im gonna hit those 2 core support bolts w black paint and remove the stupid US only 2.5mph parking lot wreck beam..its about 20-22lbs w bolts and they do nothing for the car in a wreck above 2.5mph lol
make one for 2019 please
In the works!
One of those things if the jdm one was OEM, people would swap it out to the usdm and vice versa. Usdm looks way better ;)
Nah. All preference, what it all boils down to.
I would have to agree with you the usdm grill does look better.
SportSharp especially with a red pin stripe on the halfway break
It's one of those "It's jdm" mod. Only reason I replaced mine was because a truck backed into me and cracked my oem grille
Lmfaoo you're right
lol grass is always green in the other side. im sure the fans from japan are paying good money for the US style.
rear 2.5mph rated beam is same weight, get those outa there!
what the color of that sti
its a WRX, but the color is World Rally Blue
Does this work on 2018?
No, the 2018 grille is different.
Ok thanks
Oem didn't look bad at all imo.. Waste of money that could be used for something more practical for the car..
What color paint is that?
+eduardo ortiz WRB
+SubiSpeed thats what i thought but it had this purplish shine to it at some point in the video lol didnt know it looked that good under a different light
yeah, subarus with the word rally blue paint just look damn sexual :)
The grill looks exactly the same lol
You can install the jdm version without taking off the whole bumper.
Tyrell Hawk how?
Charles Cab I'll post the link in a sec,
Charles Cab I know 5 other people who did it this way also. No need to make more work by removing the bumper
got the link?
I just posted the link
Wow . Wish I could just take parts from my car or bike n just throw them after an upgrade lol $$
It wasn't trashed. It was caught by his friend. lol
usdm looks better imo
USDM looks better. Seems too shiny, it doesn't match with the fog light bezels.
lol u can see someone catch the usdm grill haha why even use the sound effect and pretend?
wtf lol the grilles look exactly the same...
Looks too glossy imo. I prefer the matte.
US only one is whack....all busy and weird. What about the 2.5mph (useless) crash bars that weigh 20+lbs under bumper.....if they dont support front can they be unbolted and tossed into dumpster also? Those beams are worthless above 2.5 mph
Wow. What a colossal amount of time and effort wasted for an aesthetic upgrade that doesn't actually look better/worse.
JDM AF
JDM looks awful. The USDM lines up much better with the headlamps.
CADM and USDM are the same shit.
Meh
Not worth the money . If you drove by wouldn't notice.
It literally looks almost the exact same as the us version lmao that’s a complete waste of money
It really doesn't. Otherwise people wouldn't be buying them.
Waste money, can tell much different.
+Sam Scharder You can definitely tell a difference in design and finish. The JDM Grille is one of the most popular mods on the 2015 WRXs and STIs.
+SubiSpeed I would think the most popular mods would be ones that actually add performance or a noticeable improvement in looks. This grill just doesn't look like anything worth spending money on.
Take out the shitty music next time