Bloody hell its so hard to please everyone unless u pop over and do it for em. This is the possibly the BEST instructions I've ever come across. No 7min intros., no product promoting, no bullsh1t. Very practical, detailed and clear. All done in silence, tops. Thanks a mill man/woman... been great help.
Brilliant.... no waffle just really very clear demonstration. 10/10 ! Watching this has taken away any concerns I had about buying one of these Bosch machines to replace my old machine Thank You!
Yeah, have to add my kudos to the list. You really saved the day! Incredible accomplishment considering the "language-free" format. The instructions (non-verbal hieroglyphics) that came with the machine were incomprehensible. You demonstrated all that was needed. Can't thank you enough! Of course, it would have been easier to listen to the spoken word, but I have NO IDEA which language you speak. so, good job! Best of luck to you.
great help , suppliers no longer want to speak to you on the phone now they dont want do communicate on the instructions , the instructions provided is like visiting an escape room , one big puzzle ! thanks for the helpful vid !!
Соединение аквастопа со шлангом в сущности нивелирует само наличие аквастопа. Аквастоп у же частично функционален. Вот тот электромагнитный калапан следует накручивать непосредственно на вентиль подачи воды. Я так понял ПММ 450мм устанавливалась вместо шкафа ш 500, от которого остались боковины с множественными отверстиями для полок. Эти боковины следовало бы развернуть отверстиями наружу. Еще вы не показали операцию подрезки высоты этих боковин снизу чтобы нижний фасад в них не ударялся при открытии . Кремление к боковинам ПММ делают после навески фасадов - так удобнее точнее выровнять плоскость фасадов ПММ с плоскостями соседних фасадов. Еще германцы в инструкциях настойчиво советуют засверливать отверстия для саморезов диаметром 2мм. В какой нибудь дуб или ясень головка самореза может и отломаться. А ЛДСП МДФ саморез может плохо держаться без предварительного засверливания . А в целом - лайк конечно.
Thanks for this video! I was unsure how to install my door panel, and thanks to you I finally understood how to do it exactly (especially since I have an Ikea door panel which isn't compatible without "cheating").
What a star. The instructions on fitting the door are next to useless and it shows by the amount of views you have had that this film is so useful to people. If only my landscape photography films could command such an audience! Thanks for this.
Это единсвенный контент как установить посудомойку от а до я. Весь инет изрыл и нормалного ничего нет. Иструкция так вообще идиотская. Огромное тебе спасибо, мужик. Такой такой крутой!!!
I found the video informative, although no words where used all the information or how to was clearly shown I much prefer to see how it's done rather than explained using words as the saying goes picture is worth a 1000 words. Thanks
Just did install a bosh non integrated, and the included manual was.. "there is this image of plastic thing removed from squarish thing".. "I wonder if this is the correct thing or if I permanently break the machine if I remove it". And the spacers on the sides I didn't figured out what they was at all. Bosh (and others) should seriously hire you and put a instruction QR code in the manual.
Wat ze niet laten zien en wel belangrijk is bij je siflon een aftakking maken en een kraantje moet plaatsen en daarna nog de vaatwasser zelf aansluiten een gemiddelde vaatwasser gebruikt veel stroom een extra stroom groep is ook noodzakelijk
Hi, can you tell me what is the purpose of the metal plate at 0:24? If it's to protect the underside of the worktop from heat, I'm wondering if I can use adhesive aluminium foil tape instead.
Đây có là dòng máy rửa bát Bosch taij Bếp Thái Sơn giới thiệu hômvowitaij, và đang trưng bày tại Showroom. Có nhiều công nghệ đáng quan tâm như: VarioSpeed, Purity Active Plus, EcoSilence Drive, đặc biệt là VarioFlex sử dụng rất tuyệt vời
Great instructions....where can I buy the 2 round plastic fixings you insert into the side of the door? They are missing and Bosch don't have any spares!!
How did you attach the water inlet? When I screwed mine on to inlet that was previously for a washing machine it leaks a ton of water from where that black ring sits between the bulky plastic body and the screw itself.
Thanks for this.. v useful! Quick question… I have a v similar one and the door closes v fast and doesn’t stay open.. I’d that normal or is there a way to adjust?!? Thanks again
Hi, thanks for the video, can you tell me what the width of the cabinet was? It looks like you've installed it inside a cabinet - normally the cabinet is 560mm wide, yet Bosch is usually 600mm wide - how did it fit? Thanks
5 років тому+1
Hi. Sorry for replying to this after 2 years but I think most cabinets are either 45cm or 60cm already. 60cm is pretty standard almost everywhere
I love watching videos on You Tube, So 1min in, fit the plastic side screws to dishwasher, i see the holes, great! But the plastic screws are nowhere to be found! So already 1min and im totally screwed. Trying to fit "BOSCH SMV25AX01E" its 26th Aug 2019, maybe they dont come with these screws anymore. Good video, should help me with installation, looking forward to lots of swearing and stress.
I want to temporarily fit an old door to a new Bosch D/W, I wonder if that sticky tape would hold the door enough for a couple of months? Then all template and rubber parts would be unused ready for the fitters next year.
And the problems installing a custom panel on a Bosch dishwasher continues into 2020. The door cannot be opened all the way because it is hitting the kick plate. When closed it aligns with my cabinets and looks beautiful. The installer wants to do some crazy work around by using 1/2" PVC pipe as thick 1" washers. Please someone tell me (and him) there is an easier way!
It's very confusing how these machines are supposed to be leveled with just the two front legs. Do I just basically extend the legs until the machine pushes against the countertop to prevent it from falling back? Seems fairly janky, and I don't understand why wouldn't they include back legs to make this straightforward.
check the floor in the back of the opening for level (R-L). If it's out, put a shim on the low side. and set the machine on that. How would you reach an adjustment screw in the back with the machine in place??
The machine is being raised by 60mm to its maximum height, so there's space to reach under it. I already installed it by setting it on temporary supports; I was lucky to need an exact distance and the cabinet and floor being level, otherwise I still have no idea how Bosch intend for these machines to be leveled while raised higher from the floor.
В комплекте к моей посудомойке Bosch небыло ключа для защиты от детей и не было боковых пластмассовых крепежей по ширине. Так и должно быть ? Вы покупали их отдельно ?
Спасибо за подробную инструкцию, если можно пару слов куда крепить черный лист резины, который изначально лежит сверху и вы от него отрезали пару ушей для крепления двери.
Hi, good video. I am trying to take washer out , but.... bottom board seems to be blocking it. Question .Is that board glued to dishwasher or are there any clips. Do not want to pull the board with the force if there is something holding it.I can't find anything, and getting the guy that installed it would be bigger task. Thanks for any tips.
Bloody hell its so hard to please everyone unless u pop over and do it for em.
This is the possibly the BEST instructions I've ever come across. No 7min intros., no product promoting, no bullsh1t. Very practical, detailed and clear. All done in silence, tops. Thanks a mill man/woman... been great help.
Thank you so much Goran. So much easier to understand than the manufacturer's instructions!
Спасибо! Толково показано без лишних слов.
Благодарю
Very good Organisation, Very good preparation and completion.
Brilliant.... no waffle just really very clear demonstration. 10/10 ! Watching this has taken away any concerns I had about buying one of these Bosch machines to replace my old machine Thank You!
Yeah, have to add my kudos to the list. You really saved the day! Incredible accomplishment considering the "language-free" format. The instructions (non-verbal hieroglyphics) that came with the machine were incomprehensible. You demonstrated all that was needed. Can't thank you enough! Of course, it would have been easier to listen to the spoken word, but I have NO IDEA which language you speak. so, good job! Best of luck to you.
Thanks
great help , suppliers no longer want to speak to you on the phone now they dont want do communicate on the instructions , the instructions provided is like visiting an escape room , one big puzzle ! thanks for the helpful vid !!
Гвозди очень порадовали)))
Thanks
А что не так с гвоздями? Это комплектные гвозди из нержавейки.
Соединение аквастопа со шлангом в сущности нивелирует само наличие аквастопа. Аквастоп у же частично функционален. Вот тот электромагнитный калапан следует накручивать непосредственно на вентиль подачи воды.
Я так понял ПММ 450мм устанавливалась вместо шкафа ш 500, от которого остались боковины с множественными отверстиями для полок. Эти боковины следовало бы развернуть отверстиями наружу. Еще вы не показали операцию подрезки высоты этих боковин снизу чтобы нижний фасад в них не ударялся при открытии .
Кремление к боковинам ПММ делают после навески фасадов - так удобнее точнее выровнять плоскость фасадов ПММ с плоскостями соседних фасадов.
Еще германцы в инструкциях настойчиво советуют засверливать отверстия для саморезов диаметром 2мм. В какой нибудь дуб или ясень головка самореза может и отломаться. А ЛДСП МДФ саморез может плохо держаться без предварительного засверливания .
А в целом - лайк конечно.
Cheers mate, printed
instructions are one thing but seeing the install in the flesh is so much better.
Thank you
Thank you very much for taking the time to make this video and share it, it is very very useful!
I hoped for explanation how to do it "bosh way", because I completely don't understand their instructions, but your way is pretty smart :) Thank you.
Thanks
Thanks for this video! I was unsure how to install my door panel, and thanks to you I finally understood how to do it exactly (especially since I have an Ikea door panel which isn't compatible without "cheating").
+Vanessa Du Frat Please. I am glad that the video was helpful.
Thank
Great video. Didn't think I could do this installation myself. But video tutorial proved me wrong. Thanks!
You can. Just do as I do.
Thank
I have put on top steel pate double sided tape and just glue instead nailed it . Thanks for video
This good idea
What a star. The instructions on fitting the door are next to useless and it shows by the amount of views you have had that this film is so useful to people. If only my landscape photography films could command such an audience! Thanks for this.
Thank
thanks man. Im installing one in couple weeks or soo and instructions are the worst but your video says it all
Ok
Thank
Very good video! A master at work.
Thanks, I have exactly same dishwasher. Useful video!
Ok
Спасибо, дружище! Очень помог. А то эти инструкции по монтажу умственные инвалиды придумывают!
+Александр Подосинников Спасибо вам
А как быть если на шланге подачи воды нет защиты от протечки, это норм? Машинка бош 45см
Thnak you very much it's very helpful
Thank very much
Это единсвенный контент как установить посудомойку от а до я. Весь инет изрыл и нормалного ничего нет. Иструкция так вообще идиотская. Огромное тебе спасибо, мужик. Такой такой крутой!!!
Рад что помог
I found the video informative, although no words where used all the information or how to was clearly shown I much prefer to see how it's done rather than explained using words as the saying goes picture is worth a 1000 words. Thanks
Thank
Thank
Really helpful. Exactly what we needed.
This is an extremely useful video. Thank you for taking the time to post it. By the way we have a Thermador, it's the same dishwasher and it works!
Brilliant video!
Very clean job 👍
Thank
Thank
Best video ever.
Thank
лучше раз увидеть- чем сто услышать. Спасибо !
Спасибо
Real nice video! Simple to understand! Good job!
Thanks
Just did install a bosh non integrated, and the included manual was.. "there is this image of plastic thing removed from squarish thing".. "I wonder if this is the correct thing or if I permanently break the machine if I remove it".
And the spacers on the sides I didn't figured out what they was at all.
Bosh (and others) should seriously hire you and put a instruction QR code in the manual.
Fantastic material !!!
+Ryszard Szczudłowski Thanks !
Thank
It's really helpful! I've got my dishwasher from secondhand and I've got no instruction. Thanks.
Thank
Спасибо!!! Очень помог!!!
+lostprey Рад что видео было полезно.
Рад что помог
Просто и понятно
Спасибо
Wat ze niet laten zien en wel belangrijk is bij je siflon een aftakking maken en een kraantje moet plaatsen en daarna nog de vaatwasser zelf aansluiten een gemiddelde vaatwasser gebruikt veel stroom een extra stroom groep is ook noodzakelijk
這影片很棒, 它幫助我安裝.
thanx 👍👌⭐ goed job
thanks for video very helpful
Thanks
just one question - does anyone know what the role of the metal slice that we see at 0:50 is ?
Steam shield for Laminate tops
Thank you for the video instructions. Was great help for me trying to install a Siemens built in dishwasher.
+Konstandinos Kechagias Glad I could help
Thank
Hi, can you tell me what is the purpose of the metal plate at 0:24? If it's to protect the underside of the worktop from heat, I'm wondering if I can use adhesive aluminium foil tape instead.
Is to protect the worktop from the steam when you open the dishwasher. Yes, you can use alumninium foil or the Fixa attachment from ikea
Thank you so much for making this video!!! So useful!!
Thank
Thank
Thanks for this very usefull video. The notice from Bosh is awfull. Tomorrow I will mount my door, I am confortable now with the procedure :-)
Thank
Đây có là dòng máy rửa bát Bosch taij Bếp Thái Sơn giới thiệu hômvowitaij, và đang trưng bày tại Showroom. Có nhiều công nghệ đáng quan tâm như: VarioSpeed, Purity Active Plus, EcoSilence Drive, đặc biệt là VarioFlex sử dụng rất tuyệt vời
Merci👍👍👍
Thank you this is so helpful!!
Thank
Thank
Глухонемой , что-ли.
Great instructions....where can I buy the 2 round plastic fixings you insert into the side of the door? They are missing and Bosch don't have any spares!!
Спасибо!
+Oleg Regotun Пожалуйста :)
Спасибо за отзыв
How did you attach the water inlet? When I screwed mine on to inlet that was previously for a washing machine it leaks a ton of water from where that black ring sits between the bulky plastic body and the screw itself.
So helpfull, thanks.
Really useful video!! but how do you deal with the baseboard? did you have to cut it?
thanks a bunch - really useful
Thanks
Love the 2nd handle...... friends family will be tricked 😁😁
Thank
Super helpful, thank you!
Thanks
useful video but the extra handle is a bit funny :)
Thank
Good stuff Mate. Thanks very much.
Thanks
Thanks. This was a big help.
+Steve Eldredge Thanks you
Thank
Thanks for this.. v useful! Quick question… I have a v similar one and the door closes v fast and doesn’t stay open.. I’d that normal or is there a way to adjust?!? Thanks again
Thanks
+fergo747 Please.
Thank
Nice work mate.
Thank
Thank
super
+Tobiasz Konefka Thanks
Thank
Hi, where did you add the rubber flap , Bosch part number 00646750.
Not 100% right but thank you very much!
U need to use the medium screws for the sides. Not the long ones. U need to fix the door with 4 long screws. Thx
Thanks for corrections. I did as comfortable for not professional
Thank
Thanks for the vidéo. Good job
Thank
1:23 what are these two screws? the handyman forgot to add these. Does it matter?
Зачёт!
+Денис Поляков Спасибо
Спасибо
Hi, thanks for the video, can you tell me what the width of the cabinet was? It looks like you've installed it inside a cabinet - normally the cabinet is 560mm wide, yet Bosch is usually 600mm wide - how did it fit? Thanks
Hi. Sorry for replying to this after 2 years but I think most cabinets are either 45cm or 60cm already. 60cm is pretty standard almost everywhere
Ikea
Посмотрел на швы между плитки,да ну нафиг эту плитку))))
hey pro, the metal plate installed on the bottom of the bench, what's that for ?
Which is why I have a free standing one! What is so terrible about seeing the door of the machine?
I love watching videos on You Tube, So 1min in, fit the plastic side screws to dishwasher, i see the holes, great! But the plastic screws are nowhere to be found! So already 1min and im totally screwed. Trying to fit "BOSCH SMV25AX01E" its 26th Aug 2019, maybe they dont come with these screws anymore. Good video, should help me with installation, looking forward to lots of swearing and stress.
Thank you
гвоздями и молотком! сурово, по-русски! ))
Это так она укомлектована.У меня тоже пластина и гвозди.
Has this dishwasher been fitted into an old cupboard, without removing it? as am looking to fit one and the only space i have is next to the cooker
+trina Harris
I installed an old cupboard from IKEA
You forgot to put this black mat under the door. I made this with one parted door and it was a lot of trickier.
Jesus, don’t bother coming to my house, cut the tape, don’t overtighten the screws. Can’t watch the rest.......
I want to temporarily fit an old door to a new Bosch D/W, I wonder if that sticky tape would hold the door enough for a couple of months? Then all template and rubber parts would be unused ready for the fitters next year.
Thanks!!! great job!!
Thank
And the problems installing a custom panel on a Bosch dishwasher continues into 2020. The door cannot be opened all the way because it is hitting the kick plate. When closed it aligns with my cabinets and looks beautiful. The installer wants to do some crazy work around by using 1/2" PVC pipe as thick 1" washers. Please someone tell me (and him) there is an easier way!
Thanks
@@800techwhatsinside7 THANK YOU - It is installed correctly, no crazy work around and it is beautiful and just what i had pictured,
Spijkers in plaats van parkers met een accumachine, uit wel tijdperk kom deze intro.!
You can always I.D. a shoemaker who uses nails in lieu of screws.
4:30 ножницы? Не. Не слышал.
самое начало видео: саморезы? не, не слышал)
It's very confusing how these machines are supposed to be leveled with just the two front legs. Do I just basically extend the legs until the machine pushes against the countertop to prevent it from falling back? Seems fairly janky, and I don't understand why wouldn't they include back legs to make this straightforward.
check the floor in the back of the opening for level (R-L). If it's out, put a shim on the low side. and set the machine on that. How would you reach an adjustment screw in the back with the machine in place??
The machine is being raised by 60mm to its maximum height, so there's space to reach under it. I already installed it by setting it on temporary supports; I was lucky to need an exact distance and the cabinet and floor being level, otherwise I still have no idea how Bosch intend for these machines to be leveled while raised higher from the floor.
slikts There’s a leveling leg in the back,middle. The adjustment is in the front. It’s a flathead/10mm
И без лишней болтовни.
Thank
I am struggling despite your instructions, there is a rubbery sheet (No 2) that is not shown anywhere on the instructions it should go!
15 лет ставлю на скотч и шурупы. Но я не понял, зачем ты низ крепил 2 раза?
Ну я не профи. Мне показалось так лучше.
Hello, can you show the film on how to mount the rubber between the door and a dishwasher. thanks Roman
+romanosky1968 Roman, for me it is riddle too. DId you find finally place for this rubber ?
+Vladimir Titov postimg.org/image/l3zmuyeit/
Can you tell me what name of the rubber cause I don't have one for our dishwasher and I need to buy one. Thank you.
В комплекте к моей посудомойке Bosch небыло ключа для защиты от детей и не было боковых пластмассовых крепежей по ширине. Так и должно быть ? Вы покупали их отдельно ?
Все было в комплекте
В ашей были уголки крепления к столешнице и боковинам. Разные бывают варианты
Спасибо за подробную инструкцию, если можно пару слов куда крепить черный лист резины, который изначально лежит сверху и вы от него отрезали пару ушей для крепления двери.
+Vladimir Titov Вот этот postimg.org/image/l3zmuyeit/
+Vladimir Titov Она крепится снизу. Насколько я понял нужна на случай протечки чтобы вода не уходила неизвестно куда.
+800Tech Он - часть шумоизоляции.
Hi, good video. I am trying to take washer out , but.... bottom board seems to be blocking it. Question .Is that board glued to dishwasher or are there any clips. Do not want to pull the board with the force if there is something holding it.I can't find anything, and getting the guy that installed it would be bigger task. Thanks for any tips.
Thank
Can I just ask how long did the actual installation take? As in tubing, waste and was it awkward or difficult to do? Thankyou
3-4 hours
What stops the water coming through the screw hole from inside the dishwasher? Thx
+Matthew Shipp The special gasket. You can use a sealant.
На троечку!
Is that IKEA cabinet? I'm also planning to buy bosch but ikea told me I don't need to have cabinet
Yes Ikea
the sound of silence
Where can you find parts for dishwasher installation ?
In the Shop
Scusami al minuto 11:10 quel tappeto di gomma..? Tutto quel tappeto x solo due gangi
I do not know
What's the name for that sticky tape you used please
Anyone
Where does the dishwasher vent out the steam
dzienna
Thank
0:35 молоток то маленький что то взял))))