Preppin' to Pour

Поділитися
Вставка
  • Опубліковано 15 вер 2024
  • Farm Website - borderviewfarms.com
    Seed Business Website - xcelseeds.com
    Merchandise - farmfocused.co...
    Amazon Link - amzn.to/3tClXuq
    Border View Farms is a mid-sized family farm that sits on the Ohio-Michigan border. My name is Nathan. I make and edit all of the videos posted here. I farm with my dad, Mark and uncle, Phil. Our part-time employee, Brock, also helps with the filming. 1980 was our first year in Waldron where our main farm is now. Since then we have grown the operation from just a couple hundred acres to over 3,000. Watch my 500th video for a history of our farm I filmed with my dad.
    I started making these videos in the fall of 2019 as a way to help show what I do on a daily basis as a farmer. Agriculture is different from any other industry and I believe the more people that are showing their small piece of agriculture, helps to build our story. We face unique challenges and stressful situations but have some of the most rewarding payoffs in the end. I get to spend everyday doing what I love, raising my kids on the farm, and trying to push our farm to be better every year. I hope that I can address questions or concerns that you might have about farms and agriculture.
    I hope you enjoy my content and ask questions as you have them. I do my best to answer anything I can. Thanks for watching!
    I appreciate you subscribing to my channel and liking my videos. You can also find me on Facebook borderviewfarms and on Instagram @borderviewfarms
    Mailing address
    P.O. Box 321
    Pioneer, OH 43554

КОМЕНТАРІ • 28

  • @martinvanderwerff7687
    @martinvanderwerff7687 10 днів тому +2

    You can't charge group 31 batteries through their posts. The power is received and given up only by the base circle around the studs. Charging adapters are mandatory for both charging and load testing. There is nothing wrong with the battery. It's not being charged due to improper installation. Tight contact to the base circles is mandatory.

  • @djwheels66
    @djwheels66 10 днів тому

    Nathan, you really are a do it all man!! I love it!! Farming, pouring concrete, UA-camr and most importantly family man. Amazing job!!!! ❤

  • @curtbrewster8635
    @curtbrewster8635 10 днів тому +1

    A silage harvest video would be great! As a kid loved running behind the trucks to unhook the chains in the silo. This would have been in the late 1970's and early 1980's.

  • @holdenmorse4645
    @holdenmorse4645 10 днів тому +1

    Hey Nathan, I had a similar experience on one of our irrigation motors this summer. If you know which wire on the back of the alternator is the excitor wire, you could try jumping a wire from the positive on the battery to that connection and see if it starts charging. Once it is charging you can take the wire off, only takes a second. Thanks for the videos 👍

  • @randywilson9611
    @randywilson9611 11 днів тому +1

    Great video good to see ya

  • @philm9750
    @philm9750 11 днів тому +2

    Thanks for the videos.
    Is there a separate voltage regulator or is it built into the alternator?
    If there is a separate regulator then it must be checked too.
    I know you already know this so is a reminder to always keep a voltmeter on hand and whenever there is an engine cranking issue check dc voltages with engine not running and engine running.
    With engine not running battery voltage should be around 12.4 vdc at battery + to battery -
    and 12.4 vdc at alternator output + terminal and 12.4 vdc at starter solenoid + terminal ( referenced to to battery - neg terminal, to alternator case ground and to engine ground).
    Check all associated positive and negative wire/cables terminals for corrosion and tight terminal connections. Wire/cable terminals may look good from the outside and may actually be corroded at the contact patches when looked at when disconnected.
    After jump starting an engine check voltages with engine running for 13.6 vdc (higher at cold temperatures) at alternator output terminal, at battery + terminal, and at starter solenoid + terminal.
    This will tell you if the alternator is putting out the correct voltage with engine running or if there is a wire/cable issue or an alternator/regulator issue.
    To repeat always check voltages at the battery and alternator and all associated wire cables ends to determine if the alternator/regulator, battery or wire/cables are causing a no crank or no (proper) charging voltage issue.
    Even if voltages measure good at all points on a cranking and charging system cables wire/cables must be in good shape to pass the required current needed for cranking and charging.
    Sorry for the long post.
    Let me know if you would like additional information and I could send you some published material.
    Measuring system voltages can save money in unnecessary alternator or battery purchases.
    And as a side note there are inexpensive battery condition meters on the market now that you can purchase and use to check the cold cranking performance of all suspect bad batteries.

  • @southtexashay777
    @southtexashay777 11 днів тому

    Good morning, hope you and the family have been well.

  • @curtisowens4588
    @curtisowens4588 10 днів тому

    Why when you are close to the machine does it look like it is moving faster than seven inch? Your wife was a success on her new garden ideas.

  • @jocalafarms4051
    @jocalafarms4051 10 днів тому +1

    If you have a rental store close. Try a power screed one time. You'll never go back to a board again.

  • @DavidKing-ig6jy
    @DavidKing-ig6jy 11 днів тому

    Good Morning

  • @mikekenyon3322
    @mikekenyon3322 11 днів тому

    Good morning

  • @LarryLindsey-i8c
    @LarryLindsey-i8c 10 днів тому

    Old guards good to raise bars up in concrete!!

  • @jameshattenbach5578
    @jameshattenbach5578 10 днів тому

    Take that one back and get the right one

  • @agger838
    @agger838 10 днів тому

    Need to get a volt meter on there see if gauge is right. Then test off alternator. Could be a voltage regulator somewhere that's bad. Usually on the alternator tho. I've had new alternators with bad regulators from parts stores

  • @chuckbeam7898
    @chuckbeam7898 11 днів тому +2

    It’s not charging maybe a fuse???

  • @briangloskey6901
    @briangloskey6901 11 днів тому

    Morning!!!!
    You still planning to make a video(s) on the corn & bean plots?

  • @user-sx1gb7tw9f
    @user-sx1gb7tw9f 10 днів тому

    Use a volt meter to check out put of alterantor at battery

  • @b_lumenkraft
    @b_lumenkraft 11 днів тому

    That it is not connecting correctly was my suspicion all the time. Because I had that with my car. :)

  • @davidruffjr6045
    @davidruffjr6045 11 днів тому

    👍🏻👍🏻👍🏻

  • @markpontes4457
    @markpontes4457 11 днів тому

    You had over 13 volts in the battery without engine running that gage probably not working, try checking with volt meter you checked it with at shop. Is that the generator that had mice in it they could have chewed a wire!

  • @jimpolk
    @jimpolk 11 днів тому

    Is there a voltage regulator?

  • @danyockey6584
    @danyockey6584 10 днів тому

    Are you tying original driveway conrete to new pours with drilling in rebar?

  • @jocalafarms4051
    @jocalafarms4051 10 днів тому

    Curious as to what they want for a yard of cement in the Buckeye state these days?

  • @rogerfillion2804
    @rogerfillion2804 9 днів тому

    All NDP offers to Canadians is hope and its leader calls it a vision?

  • @sandman8424
    @sandman8424 10 днів тому

    Do you people ever run out of money. You sure spend alot of money trying to make things perfect looking. Esthetically pleasing for everybody. Everything that you have bought the last 5 years and having three kids to support. You people have got to be in debt up to your eyeballs.

  • @kirklothert3435
    @kirklothert3435 11 днів тому +2

    I think I'm first. Woo-hoo! I don't think I've done that in a long time