Yo dude, solid Outback build! I too have been on an Outback build journey. I'm working on my 2008 Outback XT. Lost track of what "stage" I'm at, but so far my build has the following: Nameless Catback Exhaust with Resonators & Mufflers IAG UEL Header PLM Up Pipe w/EWG flange Invidia Catted Downpipe Grimmspeed Top Mount Intercooler Kit with Splitter & Black Thermal Dispersant Coating Koyorad Aluminum Racing Radiator and cap Grimmspeed Radiator Hose Kit COBB Air / Oil Separator COBB SF Intake with SF Airbox Injector Dynamics 1050x Fuel Injectors AEM 50-1215 Fuel Pump (340 lph) iWire Fuel Pump Controller Hardwire Kit with Bypass Stud Kit IAG Fuel Rail & Lines IAG EJ Street Series Oil Pan, Pickup, Street Baffle, & Windage Tray COBB 3-Port Boost Control Solenoid COBB LF Bypass Valve Perrin Turbo Inlet Hose Forced Performance Green UHF Tial MV-S 38mm external wastegate GrimmSpeed TMIC STI-Style Turbo Outlet Hose GrimmSpeed Pitch Stop Mount Whiteline Front & Rear Anti-Sway Bars Whiteline Front & Rear Endlinks COBB Lightweight Main Pulley ADF MT Anti Wobble Insert (60d) COBB Front & Rear Shifter Bushings COBB Short Throw Shifter Grimmspeed Tallboy Aluminum Shift Knob Exedy Stage 1 Clutch & Flywheel Kit E85 Pro Tune NGK Iridium Spark Plugs COBB Accessport V3 AEM X series wideband gauge AEM X series fuel pressure gauge Grimmspeed Alternator Cover Grimmspeed Radiator Shroud COBB Delrin Oil Cap COBB Battery Tie Down Sylvania Silver Star Ultra low beams, high beams, and fog lights Draw-Tite Max-Frame Class 3 2” Trailer Hitch COBB Gray Hitch Cover Primitive Racing Outback Suspension Kit Including: King Lift Springs + .75″ Front & 1″ Rear KYB Struts with upgraded rear shocks
Very nice i wouldjust say stage x haha. Next video for Stage 4 I will be installing tomei uel headers and a Blouch 1.5xtr 10cm turbo. Thanks for watching!!
Here is a link, im not affiliated with flatirons tuning so you can buy it from another website too. www.flatironstuning.com/rcm-samco-bpv-hose-08-10-wrx-05-09-lgt Thanks for watching!!
It's hilarious to see ya facial hair getting longer as you do shit. I would've liked to have seen a more detailed look at putting in the AOS. Did you use the drain line from Flat Irons to drain into the back of the block vs the top of the block?
Yeah haha, this video was pieced together over a few months so there was alot of facial hair growth in that time. I have a more detailed AOS video for the crawford AOS that I uploaded a couple years ago. And I just use the drain on the top of the block and haven't had any issues with it that way.
Here is the link to the video: ua-cam.com/video/Lmjuj7znKfM/v-deo.html The process and line routing is pretty similar to the cobb aos with some minor differences. Thanks for watching!!
Awesome dude would love to see this series continue, just starting on my 04 impreza!
Yo dude, solid Outback build! I too have been on an Outback build journey. I'm working on my 2008 Outback XT. Lost track of what "stage" I'm at, but so far my build has the following:
Nameless Catback Exhaust with Resonators & Mufflers
IAG UEL Header
PLM Up Pipe w/EWG flange
Invidia Catted Downpipe
Grimmspeed Top Mount Intercooler Kit with Splitter & Black Thermal Dispersant Coating
Koyorad Aluminum Racing Radiator and cap
Grimmspeed Radiator Hose Kit
COBB Air / Oil Separator
COBB SF Intake with SF Airbox
Injector Dynamics 1050x Fuel Injectors
AEM 50-1215 Fuel Pump (340 lph)
iWire Fuel Pump Controller Hardwire Kit with Bypass Stud Kit
IAG Fuel Rail & Lines
IAG EJ Street Series Oil Pan, Pickup, Street Baffle, & Windage Tray
COBB 3-Port Boost Control Solenoid
COBB LF Bypass Valve
Perrin Turbo Inlet Hose
Forced Performance Green UHF
Tial MV-S 38mm external wastegate
GrimmSpeed TMIC STI-Style Turbo Outlet Hose
GrimmSpeed Pitch Stop Mount
Whiteline Front & Rear Anti-Sway Bars
Whiteline Front & Rear Endlinks
COBB Lightweight Main Pulley
ADF MT Anti Wobble Insert (60d)
COBB Front & Rear Shifter Bushings
COBB Short Throw Shifter
Grimmspeed Tallboy Aluminum Shift Knob
Exedy Stage 1 Clutch & Flywheel Kit
E85 Pro Tune
NGK Iridium Spark Plugs
COBB Accessport V3
AEM X series wideband gauge
AEM X series fuel pressure gauge
Grimmspeed Alternator Cover
Grimmspeed Radiator Shroud
COBB Delrin Oil Cap
COBB Battery Tie Down
Sylvania Silver Star Ultra low beams, high beams, and fog lights
Draw-Tite Max-Frame Class 3 2” Trailer Hitch
COBB Gray Hitch Cover
Primitive Racing Outback Suspension Kit Including:
King Lift Springs + .75″ Front & 1″ Rear
KYB Struts with upgraded rear shocks
Very nice i wouldjust say stage x haha. Next video for Stage 4 I will be installing tomei uel headers and a Blouch 1.5xtr 10cm turbo. Thanks for watching!!
@ can’t wait to see it!🤙🏻
Good build
Thank you!!
i need a link to the silicone bypass valve hose please
Here is a link, im not affiliated with flatirons tuning so you can buy it from another website too.
www.flatironstuning.com/rcm-samco-bpv-hose-08-10-wrx-05-09-lgt
Thanks for watching!!
@SWSpeedCo thanks I really needed to find one!
It's hilarious to see ya facial hair getting longer as you do shit. I would've liked to have seen a more detailed look at putting in the AOS. Did you use the drain line from Flat Irons to drain into the back of the block vs the top of the block?
Yeah haha, this video was pieced together over a few months so there was alot of facial hair growth in that time. I have a more detailed AOS video for the crawford AOS that I uploaded a couple years ago. And I just use the drain on the top of the block and haven't had any issues with it that way.
Here is the link to the video:
ua-cam.com/video/Lmjuj7znKfM/v-deo.html
The process and line routing is pretty similar to the cobb aos with some minor differences.
Thanks for watching!!
@@SWSpeedCo it perfectly encapsulates working on a Subaru. EVERYTHING you do to 1 that involves tools, is NEVER a "quick fix".
@@SWSpeedCo you're effectively modding 2 OBXTs. I'm not gonna do the E__ thing thō.
I sent you a DM on Insta regarding the top feed injector stuff. Love the content 👌🏼
Thank you!!