Thanks for the video. Sorry your pump didn’t handle two of the sprinklers but you saved me some money. I was going to use steel pipe to run mine till I saw you were using pvc. I had all the pvc I needed, just had to get a couple fittings. $8.56 later the rain gun was up and running. I’m reaching about 72 feet with the 2” pump from harbor freight with the predator 212cc engine. Pumps about 110 gal a minute.
Hi there. It’s been over a year but I just ran across your video. One thing that’s hurting the sprinklers is the main line your feeding them with. You need bigger main line for those sprinklers and a minimum of 80 PSI. Go to a 3 inch main line and tee off to the two sprinklers. That should pick your throw up. Good luck.
Thanks for the info. My pumps have 2"output and the better one only goes about 60psi, so this is the best I can do for now without investing in a bigger setup.
Sime makes some interesting sprinklers. I do not have any from them but I like their end gun impacts which is what u have. I seen 3 pivots with one of those rain guns at the end
You may have figured this out by now.....but if you have the smaller nozzles for each of those sprinklers, you could probably get the pressure back up by running the smaller nozzle in both sprinklers and regain that larger diameter you wanted. Then you could be watering with both sprinklers covering more ground.....and just run the pump a bit longer to get the amount of rainfall you need. OK...you mentioned that at the end......curious if that helped. LOL
Hi thanks for the comment. I've found the best result is with one head on the pacer pump which puts out about 50psi it'll shoot over 80ft radius consistently and put out a better rain curtain over that distance.
@@FlatCreekOutdoors .ive been researching which pump i want to get with my Big Sprinkler as well. Currently thinking I will spend the money on the Northstar model with the honda engine. I think its rated around 90 PSI on the top end. That would be enough to run two (I think) if I ever wanted to run two simultaneously.
I have two inch trash water pump and one rain gun and a 2.5 acre food plot and 200 meters of flexible PVC hose people am using to irrigate. How best can I split it using a connect to use a second rain gun to increase the irrigation radius.
Do u have a 480v electrical run by your pond ? Or do u have a engine with a pto output ? You could get a bigger pump like a pto pump I've seen farmers run 200 nelson big guns with them and they get some amazing range. Maybe invest in a bigger pump and a nelson SR100 or SR150. If you have a bigger pump you could run 2 SR150s and get maybe about 100 150 feet possibly
@@godwinsmimshach6646 my 7hp pacer se2ul e950 ran my nelson p150 with a 1.08 nozzle but it was weak. It's 50psi and 195 gpm total. But with a .70 taper bore it ran much better
Thanks for the video. Sorry your pump didn’t handle two of the sprinklers but you saved me some money. I was going to use steel pipe to run mine till I saw you were using pvc. I had all the pvc I needed, just had to get a couple fittings. $8.56 later the rain gun was up and running. I’m reaching about 72 feet with the 2” pump from harbor freight with the predator 212cc engine. Pumps about 110 gal a minute.
Hi there. It’s been over a year but I just ran across your video. One thing that’s hurting the sprinklers is the main line your feeding them with. You need bigger main line for those sprinklers and a minimum of 80 PSI. Go to a 3 inch main line and tee off to the two sprinklers. That should pick your throw up. Good luck.
Thanks for the info. My pumps have 2"output and the better one only goes about 60psi, so this is the best I can do for now without investing in a bigger setup.
My gosh Phil you sure have come a long long way with your irrigation great job.
Thanks 👍 It'll only get harder as we add more and more trees every year
@@FlatCreekOutdoors I'am sure that you are up for the challenge. Good luck Phil
Thanks so much for the videos. I'm doing something similar, and your videos showed it is possible!
That's such a great sprinkler!
Sime makes some interesting sprinklers. I do not have any from them but I like their end gun impacts which is what u have. I seen 3 pivots with one of those rain guns at the end
I've been pleased with it. It works really well
You can not use two different containers to measure water fall consistency.
Thanks, great demo and experiment. Great video! -Brad
Thanks for watching, Brad. Take care!
You may have figured this out by now.....but if you have the smaller nozzles for each of those sprinklers, you could probably get the pressure back up by running the smaller nozzle in both sprinklers and regain that larger diameter you wanted. Then you could be watering with both sprinklers covering more ground.....and just run the pump a bit longer to get the amount of rainfall you need. OK...you mentioned that at the end......curious if that helped. LOL
Hi thanks for the comment. I've found the best result is with one head on the pacer pump which puts out about 50psi it'll shoot over 80ft radius consistently and put out a better rain curtain over that distance.
@@FlatCreekOutdoors .ive been researching which pump i want to get with my Big Sprinkler as well. Currently thinking I will spend the money on the Northstar model with the honda engine. I think its rated around 90 PSI on the top end. That would be enough to run two (I think) if I ever wanted to run two simultaneously.
@@rbljackson it may not stack up that way that is restricted psi, redlion pumps are also good.
Would the old pump have gotten u more pressure with the same 2” suction hose…..but maybe a 1 1/2” or 1” discharge hose to the sprinkler(s)?
I have two inch trash water pump and one rain gun and a 2.5 acre food plot and 200 meters of flexible PVC hose people am using to irrigate. How best can I split it using a connect to use a second rain gun to increase the irrigation radius.
replace the trash pump's pump head . or i wonder if you can just replace the impeller? it is kind of hard just finding just pump heads though..
Can you use your old pump to power one of the sprinklers so you would have two going, but needing to use two pumps?
Definitely could do that. Just need to get a 2nd suction hose, or build one w/ PVC.
How did you attach the quick connect to the PVC pipe? Thanks
You should make a video of how you made the sprinkler.
How many hps is that pump
Great video! What is the horse power rating on your pump in this video?Thanks
I think its around 5hp. I can't remember if its a Honda GC160 (4.5hp) or GC190 (5.2hp).
@@FlatCreekOutdoors thank you
Is that 49 feet from the center of the sprinkler or a 49 ft diameter
Radius
Do u have a 480v electrical run by your pond ? Or do u have a engine with a pto output ? You could get a bigger pump like a pto pump I've seen farmers run 200 nelson big guns with them and they get some amazing range. Maybe invest in a bigger pump and a nelson SR100 or SR150. If you have a bigger pump you could run 2 SR150s and get maybe about 100 150 feet possibly
How much horsepower of a pump is required to use a nelson sr150?
@@godwinsmimshach6646 my 7hp pacer se2ul e950 ran my nelson p150 with a 1.08 nozzle but it was weak. It's 50psi and 195 gpm total. But with a .70 taper bore it ran much better
U need a 3” cast iron centrifugal pump coupled to a 25 horsepower gas or diesel motor for what ur doing
ok. thanks
Please i need your contact and how much is this sprinkler? I really need it
Is it possible to get one of those kind of sprinkler in Nigeria, and how much will it cost? Thanks.
can i got one of that to Tanzania please
Why not use a water reel?
you don't have a foot valve?? get one, so the water does not drain out of the suction hose.
need a water reel
😯