HOW TO REMOVE THE FRONT BUMPER of an M3/M4 F80/F82/F83
Вставка
- Опубліковано 21 сер 2024
- If you want to buy an "I AM THE WARRANTY" shirt OR if this saved you a good deal of time and/or money and want to buy me a coffee or a beer, you can do those things right here: ko-fi.com/help...
Made a DIY tutorial on how to remove the front bumper of your M3 or M4 (F80/F82/F83). It includes getting the freaking automatic headlight washer nozzle and cap off. It's really easy once you see how, but it was a pain to figure out! Hope this helps!
BMW Headlight Washer Nozzle for M4 (and i 320i 328i 335i 428i F22 F30 F31 F33 2011-2016):
amzn.to/2T8BEqg
BMW Headlight Washer Nozzle for other models:
amzn.to/363JYge
BMW Headlight Washer covers: amzn.to/2X3n30i
Milwaukee Fuel Ratchet: amzn.to/2SDsWjt
Milwaukee Fuel Batteries: amzn.to/2Wvqflh
Milwaukee Fuel Charger: amzn.to/3fgL5xg
Here is the QuickJack lift that I use:
amzn.to/2RY2JuN
--------------------------------------------------
Disclaimers
Help Me DIY is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
This video description contains affiliate links, which means that if you click on one of the product links, I'll receive a small commission.
I am a Do It Yourself, also known as DIY, mechanic. I am NOT a professional mechanic. I do not have any formal training in the automotive field.
Help Me DIY assumes no liability for anything you choose to do to your car, before, or after watching one of my videos or utilizing the content from this web site.
All DIY repairs or modifications you perform to your car are made at your own risk. Sometimes, even if you've done everything the right way, you can destroy or damage one or more things on your car. You must understand this, but by leveraging knowledge and patience, the probability of encountering one or more problems can be reduced.
Also, if for some unfortunate reason, I do give incorrect instructions and something breaks because you followed my instructions, I will NOT reimburse or pay in any way for whatever cost that may be incurred due to following my wrong instructions.
Lastly, please don't do anything to your car unless you yourself feel comfortable and confident in doing so.
Thank you very much for providing such a detailed video, which has helped me a lot. I need to remove the headlights. The first step is to remove the front bumper. Because I also have the headlight cleaning function, I found many videos. They It just tells people that they need to remove the screws and headlights for cleaning here or there, as well as the side radar and camera, but it does not tell others how to remove the buckle in detail.
+张youxin yes, I found the same. Glad it helped! Hope you’re a subscriber now!
Your channel is a Goldmine! Thanks!
+Magnus Wiberg thanks! Hope you subscribed for me.
BMW likes to make their suppliers, or they themselves, have some type of competition to see how many different types of electrical/basic connections in one car.
+Philip Gray 😆 I think so
Amazing video, do you need to disconnect the battery? thanks a lot
+@filipefrango1671 thanks! No you do not.
Great video BTW.
+Philip Gray thanks! 🍻
You don’t remove the headlight washers at all brother. You leave them connected and just undo the feed hose under the passenger headlight
You made sooooo much more work. You literally just pull connector on the hose back and the hose pops off. Washers stay on. Bumper just slides off.
Hi you disconnected the the camera sensor when removing the front bumper
Did you have to calibrated the sensors when installing the bumper back in ??
How did you go about doing that ??
Thanks
+tony pham no recalibration was required
@@HelpMeDIY long story short
I had a little incident and scraped the front right corner of the bumper
I took it to a smash repair places to get it fix they want to charge me $250-500 to calibrate the sensors I thought it was just a plug and play kinder thing,it wasn’t 1 shop but 3 of them said the same thing that it needs to be calibrated again for it to work I’m from Australia if it help with anything thanks
@@tonypham5491 as far as I know it is
No need to remove headlight washers, just main feed line needs to be disconnected on passenger side only
+Philip Mathew maybe… I couldn’t figure it out though 😆
Just pull up on the black plastic collar and pull the line off the T.
Can you tell me exactly where the long screw at 2:26 is ? I just changed the new fender liner and the lower deflector but I forgot the location of that long scew :(
+Vinh Phan should be where me ratchet is positioned at 2:21 I believe.
Where did you get your upper cf piece ? 😊
Any issues with the air bags?
+Ginger Racing (BudgetBeastBuild) not at all
Do you have pedestrian protection on your car. Is it dangerous to remove the bumper with pedestrian protection? Because i want to retrofit pdc and i cannot find a video to remove the front bumper of a car with pedestrian protection.
+Frank Lecock this is the first I’ve ever heard of “pedestrian protection”. I assume it’s a sensor or cameras similar to the park assist? Those where just one connector to disconnect so I would assume that would be similar.
Thanks, pedestrian protection is a system that makes that the hood comes higher on the side of the front window if you hit a person. It is indeed a sort of sensors behind the bumper, i am a little affraid that it will be activated wen i remove the bumper.
+Frank Lecock interesting. So similar to an airbag. I would think just like an airbag that if you disconnect the battery you would be fine.
@@HelpMeDIY Ok, Thanks. Will try that soon.
Frank Lecock let me know what you find!
Just take your wheels off .if your smart you already did the studd conversion and swapping wheels takes no time
+BPF80M Car that does give you more room to work for sure.
@HelpMeDIY yeah no hate. Ive just seen so many videos. Not yours of people making all kinds of excuses for not. My guess is alot of the youngerkids dont have propper tools. I cant talk im on my 6th lip and have decided just to get a lightwieght. Ive has 2 carbon m and a cs lip all from BMW and they broke the same as an ebay one. Good video
@@BPF80MCar-vi1pg thanks man! 🍻
My quick jack bleeds like a stuck pig
+Brad Jack 😂 mine is much better after tightening the connections
@@HelpMeDIY yeah you'd think that would help .I've taken those fitting off and taped the ?I've taped and liquid taped them. It seems to find a weak spot then dirty up my garage floor. If I had the room I would've gotten one of those post lifts