Extreme capacitor. Nanocrystal, voltage increase part. 8
Вставка
- Опубліковано 4 жов 2024
- See also video part 1-2-3-4-5-6-7-8 at "larskro" channel.
• Extreme capacitor - He...
For more information.
Demo with heat, no electric pulses.
The soldering iron is disconnected. Max voltage I have seen is 16 volt.
I don`t fully understand what is going on, in this special multilayer nanocrystal capacitor 10uF 25v ??? - Наука та технологія
Conservation of energy. Heat causes the ceramic capacitor to have a drop in capacitance (reduction in dielectric constant) so same energy across lower capacitance requires higher voltage. I've seen the same with air dielectric cap, with plates pulled apart. Just need a very high impedance voltmeter.
Why is your motor still running when you put it into Loop OFF mode and only very slowly reducing in RPM ? Normally it should come to a stop or Reduce RPM very fast...
Does the rotor have so much mass, that this is just a flywheel effect ??
Great work many thanks for sharing. Where did you get nano crystal please? Is the other component a diode? Once again many thanks.
Thanks again. You can buy this on ebay.com
Cheers Larskro.
It`s a tantalio capacitor smd. Is a very well in radiofrecuency.
Please try this with a flame heated soldering Iron, if it still increases voltage with applied heat, you might be on to something. This could be a way to convert heat directly into electricity. Also, please see if you can heat and then cool capacitor to see if their is any gain or loss in power or amps. I think the heat might be causing the crystal to expand and cause a closer surface area, that might increase the efficiency of the capacitor. This is not a bad thing at all. You might be on to a much more efficient way to step up voltage.
is the cap from the tap light? its behaving like a thermocouple, thats pretty cool - not only can it store power but it can create it too
No. Search on ebay.com "ceramic capacitor" x7r x5r z5u y5v
I don`t know which type, there is the best type for heat
i just had a look and its the x7r ones that look like yours exactly. i did have a thought to put them in parallel to bump up the current and try use them like a thermal electric generator but from what i cant tell with this demo is that i dont need a cold side.
You have to buy the type, with the poorest temperature stability.
When you want to use it for a heat converter.
en.wikipedia.org/wiki/Ceramic_capacitor
Larskro just for fun i have bought a pack of 100 as they are cheap. lets see in i can get an amp or two out of them =D
Larskro
That would be Z5V, followed by Z5U, Y5V, Y5U.
www.marvac.com/fun/ceramic_capacitor_codes.aspx
You need caps that have the narrowest temperature rating, with the highest tolerance range (least temperature stable).
google "peltier effect"
there is no mistery. is just the resonance 60 hz of the iron soldier and you are receiving electricity from your own home. if you want to know how to make real free energy just tell me.
Carly Shake: Howdy, I was a carpenter for most My life but due to a near death accident (I was crushed by a truck driven by a drunk, illegal, gang member) now I've been teaching myself as much as I can about electronics via UA-cam, Google, Etc. You stated the if I "want to know how to make real free energy just tell (ask) You". Well I would love to learn as much as You are willing to teach me. I've made a couple Joule Thieves, 1 12Volt solenoid motor, a Newman Motor, & a couple of very simple motor's I forget what they are called, but it's just 1 AA Battery, 1 small button neodymium magnet & bent copper wire. Would You Please consider contacting & teaching me some of what You know? Thank You for Your time, Rick. If You want to contact me via email just ask & I'll send it to You.
Thermoelectric generator
You dont make any sence we dont know what your teying to point out what capacitor you dont have a capacitor you have a diode a cristal ocilator looks like it an led.?wheres the capacitor?