I am getting some new ball valves for your co2 confetti blowers. We attach the ball valve on the confetti blower and not on the co2 tank side. We have one brand with nice valves, but were pretty sure the hollowed part were the gas flows through (i dont know what that part is called, sorry), is too small. How much space does co2 need to flow properly to avoid possible daming from build up/freezing?
This might be a little off your area but do you know the type name of the connection type that goes on a co2 cartridge cylinder with a 1/8" thread? When the cartridge cylinder is screwed in place the sealing on the cartridge is punctured. I am trying to find litterally any form of fitting (coupler, regulator, adapter etc) that connects to a cartridge cylinder but I don't know the name of it and what to search for. The only thing ive found so far i a bicycle pump but it has very limited usage because it can only pump a bicycle. If it had a G1/4" on then I could do something else with it.
Sir, I want konw that our CO2 cylinder Hydro testing failed due to adaptor failed during Hydro testing, is it recommended to replace with new adaptor ? Please suggest
is there somekind of raiser pipe under the actual cylinder valve that keeps the gas in liquid form until the valve exit point or smth? and is the co2 gas inside the cylinder actually in liquid form at all lol
Hello, I am looking for some help regarding a connection between a hydraulic tool to a nitrogen tank. Is there any way to send you a picture and receive your suggestion? Thank you very much
Hi yes, please see the charts we have for fittings here: www.cryofx.com/co2-cryo-hose.html for the hydraulic side, and the nitrogen fitting should be one of two types depending on pressure. A picture sent to us will help notice which type.
Is it common for these sizes to almost, but not perfectly, fit? I would hope that with pressures this high, 'almost' wouldn't happen, but I received an effects machine from China that came with a CO2 hose having an end fitting much like the W21.8 you show. I bought an adapter, and either it or the hose is off by about 5 thousandths. It's maddening that NOWHERE on the web can I find a drawing for the W21.8. Your video was literally the only source of info on these connectors I could find anywhere on the web. Thanks for the information you provided! If I can, I will buy parts from you since you actually know what you're talking about.
![Co2 Cylinder Markings - Co2 Tank Markings [CryoFX]](http://i.ytimg.com/vi/6WkSDzFwfC0/mqdefault.jpg)
![Co2 Cylinder Markings - Co2 Tank Markings [CryoFX]](/img/tr.png)
![How Long Can A Co2 Tank Last - Co2 Tank Sizes Chart [CryoFX]](http://i.ytimg.com/vi/P9sOpZfRK6g/mqdefault.jpg)
Thanks for watching! Comment questions and we will be sure to answer them! More info available here: CryoFX.com
Excellent video. Now I have a place to send new welders to who need to understand CO2 for their MIG machines. Subscribed!
Awesome, thank you!
excellent over view
Great Video!
Wish I could find the fitting that Coldfire Trainer is using to refill their barrels
AlwaYS very informative! Thank you!
I am getting some new ball valves for your co2 confetti blowers. We attach the ball valve on the confetti blower and not on the co2 tank side. We have one brand with nice valves, but were pretty sure the hollowed part were the gas flows through (i dont know what that part is called, sorry), is too small. How much space does co2 need to flow properly to avoid possible daming from build up/freezing?
Very helpful and thank you for making this. 😁
This might be a little off your area but do you know the type name of the connection type that goes on a co2 cartridge cylinder with a 1/8" thread? When the cartridge cylinder is screwed in place the sealing on the cartridge is punctured. I am trying to find litterally any form of fitting (coupler, regulator, adapter etc) that connects to a cartridge cylinder but I don't know the name of it and what to search for. The only thing ive found so far i a bicycle pump but it has very limited usage because it can only pump a bicycle. If it had a G1/4" on then I could do something else with it.
Why there are adapters available from CGA 320 to CGA 580? Can you do please do a video about Helium?
I need an adapter for large co2 tank (10 lb) to a 5 lb tank
Sir, I want konw that our CO2 cylinder Hydro testing failed due to adaptor failed during Hydro testing, is it recommended to replace with new adaptor ? Please suggest
is there somekind of raiser pipe under the actual cylinder valve that keeps the gas in liquid form until the valve exit point or smth?
and is the co2 gas inside the cylinder actually in liquid form at all lol
Hello, I am looking for some help regarding a connection between a hydraulic tool to a nitrogen tank. Is there any way to send you a picture and receive your suggestion? Thank you very much
Hi yes, please see the charts we have for fittings here: www.cryofx.com/co2-cryo-hose.html for the hydraulic side, and the nitrogen fitting should be one of two types depending on pressure. A picture sent to us will help notice which type.
@@Cryofx Thank you. How can I send you the picture?
Is it common for these sizes to almost, but not perfectly, fit? I would hope that with pressures this high, 'almost' wouldn't happen, but I received an effects machine from China that came with a CO2 hose having an end fitting much like the W21.8 you show. I bought an adapter, and either it or the hose is off by about 5 thousandths. It's maddening that NOWHERE on the web can I find a drawing for the W21.8. Your video was literally the only source of info on these connectors I could find anywhere on the web. Thanks for the information you provided! If I can, I will buy parts from you since you actually know what you're talking about.
I could tell you grew up in the hood me Vida Loca😁
Thank you. Problem solved.
Parallel.
Fucking Awesome Teach!!
Thank god your not doing flammable gas as you are totally confusing on this presentation covering way too much in far too little time.