Did the job this weekend on my 04 with 145,500 miles, and this video was invaluable. It is very well laid out, easy to follow with good narration and camera work. Kudos to you! I actually broke the job down into two separate ones, one for the front/left rocker cover and one for the back/ right cover. Front was really easy. Back was more difficult and time consuming because of the intake plenum, but was still not that bad. The one thing I found was that there was also a 12mm bolt, threaded into the back of the intake plenum, attached to a bracket coming up from the block that wasn't mentioned in the video. Took awhile to figure out why it wasn't coming loose from the engine until I found that. Once it was out it was a breeze. I attempted this because I had an oil leak at the plug seals. As it turned out the back/right cover wasn't leaking but after finally getting that plenum off, there was NO WAY I wasn't going to change it. Also replaced the spark plugs and coil packs for good measure. I ordered the valve covers, coils, plugs, vent line, intake and throttle body gaskets at a combination of Rock Auto, Amazon and e-bay,and had $198in parts when it was all over. I also removed the throttle body and cleaned it with CRC spray cleaner while I had everything apart. It had a good buildup crap in the inside walls and butterfly valve. Thanks again for this video. It was a lifesaver!
Tom Leonard Awesome glad the video was able to help. Thank you for watching out for all the tips. I will pin it to the top thank you again for watching!
Yes sir you are correct about that 12mm bolt that holds the pressure line...what a pain to get that one out..definately gotta edit that into the video..but everything else was laid out great thank you..
Can you give me a idea of where this 12mm bolt is. I am actually doing my 06 murano and I think I am running into the same issue. All hoses and electrical clips are out from the back but i can not left the intake out. It feel like something is still connected. Should a feel like a metal plate where the 12mm bolt is? Also the hose attached looks like it has some silver covering on it. Am I in the right ballpark I've been working on this job for 3 days and quite frankly I'm getting super frustrated. ANY HELP WOULD BE GREATLY APPRECIATED
I have never seen any videos like this on UA-cam this guy is more or less trying to help people like us that aren't certified full mechanics on how to fix our own vehicle step by step bolt by bolt and more or less a perfect learning video that no one can deny
This is the best how to video I have ever seen on youtube. Right to the point, great lighting, and everything explained well. Thank you for all your effort, it is very generous to share your knowledge.
I'm very impressed how you explained and detailed every single part of the removing and putting every part together. Well done 👍👍👍👍👍but replacing the valve gasket at the back is a challenge. Very good video.
Your video is great! I wrapped my iPad in Ceran wrap (so it doesn’t get dirty) and followed each step as you did it. Pausing the video while I completed each step. The shop quoted me $865 to do this and swap the plugs. I was able to do it for under $200 thanks to your video.
$865??? That's insane! This is a $500 job at most. We were just quoted $469 for our soon-to-be 2003 Murano. My 2004 Maxima may need new valve cover gaskets now, too, which sucks because I just did my spark plugs last summer and the intake manifold was a PITA.
Just finished replacing valve covers and gaskets on my wife's 3.5 liter 03 Altima. Your video helped immensely and just wanted to let you know that I appreciated your effort putting this together! Thank you!
Thanks for the video and the well explained instructions! I now know that I can’t do this repair on my own! I appreciate you from a USMC veteran! Happy New Year
I have a 2004 Nissan Altima and it is exactly the same. I reviewed a couple other videos and yours was the best. The front was not as involved as the rear but the rear was not difficult. No special tools were required as I saw in other videos. Don't know why the customer did not go for the entire valve cover with the new spark plug seals. I have had several Nissans and the spark plug seals leaking was a common maintenance item. Although the Altima did not have any leaky seals like the Murano you worked on. Like your top poster, I will replace everything I can while it is apart, plugs, coils, vent line, etc. You can change the title to include the 3.5 Altima. Thank you for the great assist!
The windshield wipers can be removed and then the plastic shroud underneath. Remove the metal pan underneath that and you have easier access to the back of the engine which includes all of those connections from hell on the back of the intake.
Hello i have a 2003 nisssan murano with oil in the spark plugs. Does that mean i would need new valve covers or just the new gasket should be fine? Great video by the way.
I am planning on replacing both covers. Would it be a problem if I replace the front one first and then the rear one?.. I only have oil coming into #4.
I have a white smoke coming on hood on my Nissan Murano but the temperature still cool and no leak. You think is my gasket, and can a liquid sealer can fix it..
First off Great Video!! Very helpful! Now, I Just bought a 2005 Nissan Murano it has 193,000 miles. I changed the cam shaft sensor bank 2, then the egr vaccum thing. And all of a sudden when I was on the highway the engine began to bog down and was having a hard time accelerating. I pulled over and the engine was smoking because oil shot out from some where. It looks like it was in the front because the oil shot all over my fan in the front? Could this be because the valve cover gasket needs to be replaced in the front?? Idk where this oil came from.
1.) What is a good cost estimate for parts and labor to replace just the gaskets? What is a good cost estimate for parts and labor to replace the valve cover and gaskets?
You added a dime-sized glob of silicone sealant in the corner of where ends of the valve cover where the cover curves up. Is that all you need? In the owners manual it shows a line of silicone that starts at the first bolt-hole and extends to the top of the curved portion on of the valve cover. Should I follow the service manual or what you did? Thanks.
The Murano you worked on is missing the bracket holding the power steering hose up. That is a 12mm bolt and is a total bitch to remove and it also keeps you from pulling the manifold forward enough to undo the clip holding the bottom portion of that plug in place thus forcing you to remove the 10mm bolt holding THAT bracket on. BTW, I didn't have to pinch off the water hoses, and yes, the system was full. Note to anyone attempting to do this at home, BUY THE VALVE COVER SET!!! I was hoping I wouldn't need them and ended up wasting 31 bucks on gaskets as the rear cover was bad. Since you are in there...might as well change the plugs (mine were burned open to 58 thousandths) and the coil packs so you won't have to pull that damn intake off AGAIN.
I started to get white smoke coming out of my exhaust right after this install. Everything looked right. No drips, Car seems to be running fine. But the white smoke seems to come after it sits for a while. Its now a big puff on start up.....white smoke. Any ideas? Please help..I had no smoke from exhaust before this repair. Im not leaking oil anywhere.
trickplay461 check the PCV system. Make sure the vent tube that goes from Valve Cover to Valve Cover is plugged in and is not plugged. Replace the pcv Valve.
Bro, you rock! You have answered all my questions in a timely manner. My mechanic said he checked the PVC system and everything was good. Smoke for 3 months out of exhaust! Finally I wrote you and tried your advice. PVC valve was clogged !!! New valve and new air filter, which was choked with dirt and no more smoke!!! Thank you so much.
I don't have any smoke thank God but I'm burning oil reading forums and watching videos im convinced my issue is the PCV valve because I did everything new valve covers gaskets filters all the goods and in 3 weeks I needed oil after all that 3-4 days ago I put 5qts 5w-30 and already need possilly another qt but after watching this I definitely dont wanna do it myself its in the back smh I'm no mechanic so I gotta pay sucks man all this money I put in this murano this year its crazy
How to Automotive .. How r u sir . I have problem on my altima v6 2005 leaking oil in spark plug on rear part of engine 2 plugs and blue smoke . Thnk u alot
how hard was to remove and put the valve cover back? I have an 07 murano and I have to replace the front valve cover gasket but there is not much play on the wire harness even by unclipping the wire harness from the brackets especially the one that is right above the cover that goes to the bottom. Is there an easy way to make it more flexible in order to install the cover back again?
Thank you for the video! I may have a oil leak in my '05 Murano with over 161K miles on it. In late winter, I started getting heavy white exhast smoke when I started up my car. It goes away after a few minutes. About 2 months ago, I had a low oil pressure light on. I regularly had my oil changed, the last time being in January with additional repairs afterwards (new starter, 1 engine coil, camshaft and crankshaft sensors replaced). It didn't make sense that my oil pressure light should be on after spending thousands of dollars on repairs. The car started making churning sounds on acceleration. I learned how to change my own oil and oil filter. The old oil was thick, but smooth (no grit). Once I changed the oil and filter the light went off, the churning sound went away, but I still have that white smoke coming from my car exhaust just after it is turned on. I predominantly took it to the Nissan dealership, but now I am going to fix my car myself. What else should I be look at for the oil leaks?
Antoinette I love my 2007 Nissan Murano with 193,000 miles but mine does leak oil to I had to change the spark plugs at 173,000 miles and did notice 1 spark plug covers in oil and figured that was a valve cover gasket.
im sure you found a fix and or no longer drive the murano but my fix for the white smoke on start was the pcv on the rear valve cover was clogged with oil which made any excess gas and pressure release through my exhaust opposed to the pcv. Also changed spark plugs while i did this so it mightve helped that too
Awesome video and well laid out. The one thing I had to do differently is to use a 12 mm gear wrench on the 2 bolts attached to the rear bracket holding the intake manifold. My 12 mm socket was hard to use back there. After doing this job, the car does not idle so I need to check my work but can't see anything.
I have a question,regarding the O2s11, is it an air fuel ratio sensor or it’s an O2 sensor? And does the air fuel ratio sensor always mounted before the cat or after or it could be either or ? And how do you identify it is an air fuel sensor from O2 sensor?thanks
mckoy lach On some of the earlier models it was oxygen sensors front and rear and the newer ones air fuel ratio is in the front. Air fuel ratio’s sensors always go before the cat and oxygen sensors. The way to tell if you have an air fuel ratio sensor is to look at the under hood label. There’s a section where all the emissions devices are labeled. May see something that looks like this A/F or O2
This job is time consuming how long did it actually takes to get this job done. Cause I'm about to work on my wife's 2007 Nissan Murano. I'm waiting for the parts to arrive. I. Also replacing the rack and pinion followed by Oil cooler O-Ring & Oil pan as well. You think it my take me about 4 days? lol!!
Hi, so I have a 2004 Nissan Murano and I'm assuming the gaskets need replacing. The symptoms I'm getting are oil leaking on the front part on the engine and white smoke coming from passenger side after I have driven a short distance. What's your take on this? Thank you
MrUwannabet if the oil leak is in the spark plug tube then yes this could help. But there could be a lot of things causing it to hesitate. I would start by pulling code.
I spent over $2,500 on this hesitation problem. Ross Nissan dealer still can't fixed it right & my car still has same issue. I don't want to take it back for 3rd times to that dealer. No more CVT car for me! Thx..
My murano has 107,000 miles and I just had my spark plugs, intake manifold gasket and valve cover gasket replaced. I originally planned to only get my spark plugs and intake gasket serviced, but my mechanic noticed some oil leaking around the valve cover, but he said I only needed the gasket. And now I'm worried that I should of replaced the entire valve cover instead of just the gasket. So now my question for you is, will I be expecting any trouble with any type of leak after I just replaced all but the valve cover since I didn't know the seals weren't serviceable?
Chris Keath this is one of those situations where you could be good for a long time or the seals could start leaking into the spark plugs and you have to do the entire job all over. From my experience service writers are afraid to call customers back and try to up sale so they let things like this slide. But in the end they end up costing you more money
Im trying to figuer out why mine is running so bad after i changed my gasket. It ran smoth before the was oil in the spark plug when i pulled the coils can some one get back to me on this
I have a problem like my murano came out code p0507 change spark plugs change valve cover gasket coil, and also the body of acceleration, and also try make him relearn with the scanner and do not want to know what I would advise
Juan Carlos Olea the code means that the idle is to high. So look for vacuum leaks. Gasket came off or hose unplugged. Also something maybe pinched under the intake.
I have an 05. I got a misfire on cylinder 3 so I got all the spark plug coils, New spark plugs and I just removed the intake manifold and I found out that the coil was soaking wet with oil. Im not sure if it's cylinder 3. I'm not familiar with nissan but, it's the third one left to right(driver's side) Will this job fix the problem? Thank you
chucho 444 Oil on the spark plugs due to the valve cover leaking and you need to replace the bow cover gasket or Val cover. If you clean it out and put the plugs and coil‘s and it will only temporarily fix it. The oil is what’s making it misfire.
Ok bro. I did this but here are my suggestions. I have large hands so a pair of extra long needle nose pliers were huge in reaching lots of small clamps, etc. Lighting is poor so i suggest some powerful lights to make life easier, and finally I over torqued one bolt on the cover which snapped. Torque setting was off on my tool and it was a nightmare to remove!! otherwise great video thank you !!!
Why would the gas not be working after doing this ? The engine started and runs on its own by the throttle does not work it only rolls and did not do this before and tips on if i missed something or did something wrong?
Hi...I'm about to attempt this. You are recommending the replacement of all the gaskets? I saw you posted links for the different ones. I did not see the link for the vent line connecting the valve covers. Could you add this? I could not find it on Amazon, like I did the other links. Thanks...good video.
Abel Figueroa hello I guess I forgot to put that link in there. I just updated it in the video description it's the fourth link down. It's titled Nissan Murano crankcase ventilation blow by hose. Thank you!
Thx, again, I'm asking SHOULD all the gaskets u listed need replacement? or can i do just the valve cover? my local shop wants $600 including new spark plugs.. and they are not replacing the cover... Just the gasket. I'm doing new covers and want to know if all the gaskets u mentioned are must haves. thank you!
Abel Figueroa it's possible to use the throttlebody gasket and in a pinch I have reuse the intake gasket. But you leave yourself open for a future problem. As far as the tube seals on the valve covers it's a lot of work so I would change them out. The covers are that expensive.
Ive read countless times that the seals are not serviceable on the valve covers. am i wrong? i have the 06 murano awd. really appreciate the fast response.
I unplugged the throttle body when doing this since it was very dirty and my car revs on its own up and down and doesnt idle. what can i do to fix that?
just did this job and know i have misfire in all cylinders (did a sparkplug change regular ngk sparkplugs not OE and i gapped at .044) Help please i took this apart 5 times already to see what is wrong cant find nothing 😫
Johnny Placido I would still try pulling the code even though the light is not on. Most likely a misfire. If you check mode nine in generic it may tell you which cylinder is misfiring. Also injector failure is comment on that vehicle. Another thing because it is low engine oil timing is controlled by oil pressure.
I love my 2007 Nissan Murano with 193,000 miles but mine does leak oil to I had to change the spark plugs at 173,000 miles and did notice 1 spark plug covers in oil and figured that was a valve cover gask
NFL YoungBoy Yeah that’s gonna be a valve cover leak. Unfortunately the seals are replaceable the whole cover has to be changed. Kind of a dumb design.
Great video, shame its such a poor design... in my experience the plug seals go first so best to just replace the covers. But I like what you showed and how you do it. Good job. 🙂
Hey anybody I have a 2007 Nissan Murano with 193,000 miles and I was just doing preventive maintenance by changing the valve covers because when I changed the spark plugs at 170,000 miles one spark plug was covered in oil the ceramic and where it sparks at and changed the 3 rear ignition coils but anyways this week I replaced the valve covers front and rear and that took me 4 days since it’s very cold in Chicago and it was snowing and so when I was working on the front one I had the front ignition coils in a drawer and they were kind of getting snowed on so I just wiped them off and closed the dresser to dry them and install them tomorrow so when I put the car back together I had a code that read P0081 then I looked around the engine and I just reconnected a harness and I reset the code then it was running fine for 30 seconds then it got to running rough again and got a code P0300 and wonder if it’s the front ignition coils but I replaced all the spark plugs at 170,000 miles and only the rear 3 ignition coils
Yo soy amante al primer 2i003 y 2006 que soy dueno por anos y es el mejor suv y el precio siempre se mantiene el mismo. The best and 1 reliable suv ever.
I think this is the problem that i have with my 2007 murano I see oil leaking from the middle/front of the engine, behind the a shield. White smoke creates as the liquid burns in the catalytic converter
U keep.cslling your Milwaukee power wrench a Makita bud!! Great video on the repair, just replaced both my valve covers due to a massive oil leak and also had to replace my power steering fluid lines due to another bad leak. Great timing to do at same time, along with full tune-up and now vehicle runs way better with no oil/fluid leaks anymore! Thanks chief!
How to Automotive I have a 2005 quest and at the top left of the valve cover there is a hose I broke when replacing the valve cover. Is that the same vent hose? Thanks for replying
First I would like to say thank you for this video! I’m working on a 2005 Murano and this was extremely helpful. While replacing my sparc plugs, I noticed one of the rear sparc plugs had oil so I also replaced the rear valve cover with a brand new one which also included a new pcv valve. I also replaced the hose that connects from the front to rear valves. When I first started the car, there was a lot of white smoke coming from the exhaust. I saw another person commented with the same issue which turned out to be the pcv valve. My pcv is brand new though. Any other thoughts? Thanks again
Matt Wall If you only got the smoke the one time after the repair then I would suspect that some of the oil that leaked in the spark plug tube drain into the combustion when doing the repairs. If it’s just a little oil it’ll burn off pretty quickly and you’ll never see it again unless you have an internal engine problem.
Changed mine about a week ago, last night it started acting up again sputtering and smelling of burnt oil... What would cause it to do this again already
Brian King sorry you’re having this trouble. What comes to mind is either something didn’t get put together just perfectly or you have a bad PCV causing pressure to build up inside the crank case.
Did the job this weekend on my 04 with 145,500 miles, and this video was invaluable. It is very well laid out, easy to follow with good narration and camera work. Kudos to you! I actually broke the job down into two separate ones, one for the front/left rocker cover and one for the back/ right cover. Front was really easy. Back was more difficult and time consuming because of the intake plenum, but was still not that bad. The one thing I found was that there was also a 12mm bolt, threaded into the back of the intake plenum, attached to a bracket coming up from the block that wasn't mentioned in the video. Took awhile to figure out why it wasn't coming loose from the engine until I found that. Once it was out it was a breeze. I attempted this because I had an oil leak at the plug seals. As it turned out the back/right cover wasn't leaking but after finally getting that plenum off, there was NO WAY I wasn't going to change it. Also replaced the spark plugs and coil packs for good measure. I ordered the valve covers, coils, plugs, vent line, intake and throttle body gaskets at a combination of Rock Auto, Amazon and e-bay,and had $198in parts when it was all over. I also removed the throttle body and cleaned it with CRC spray cleaner while I had everything apart. It had a good buildup crap in the inside walls and butterfly valve. Thanks again for this video. It was a lifesaver!
Tom Leonard Awesome glad the video was able to help. Thank you for watching out for all the tips. I will pin it to the top thank you again for watching!
Yes sir you are correct about that 12mm bolt that holds the pressure line...what a pain to get that one out..definately gotta edit that into the video..but everything else was laid out great thank you..
Can you give me a idea of where this 12mm bolt is. I am actually doing my 06 murano and I think I am running into the same issue. All hoses and electrical clips are out from the back but i can not left the intake out. It feel like something is still connected. Should a feel like a metal plate where the 12mm bolt is? Also the hose attached looks like it has some silver covering on it.
Am I in the right ballpark I've been working on this job for 3 days and quite frankly I'm getting super frustrated. ANY HELP WOULD BE GREATLY APPRECIATED
2:19 is that the 12mm bols you are talking about?
I have never seen any videos like this on UA-cam this guy is more or less trying to help people like us that aren't certified full mechanics on how to fix our own vehicle step by step bolt by bolt and more or less a perfect learning video that no one can deny
By far the best non drama video I ever watched. Very informative without being soap opera based.
Glad you like the video. Thank you for watching!
This is the best how to video I have ever seen on youtube. Right to the point, great lighting, and everything explained well. Thank you for all your effort, it is very generous to share your knowledge.
I'm very impressed how you explained and detailed every single part of the removing and putting every part together. Well done 👍👍👍👍👍but replacing the valve gasket at the back is a challenge. Very good video.
I started this job at work an hour before I left for the day, thinking I could get it done. So far, it's kicked my ass man😂
Your video is great! I wrapped my iPad in Ceran wrap (so it doesn’t get dirty) and followed each step as you did it. Pausing the video while I completed each step. The shop quoted me $865 to do this and swap the plugs. I was able to do it for under $200 thanks to your video.
jaime33912 nice that’s a big savings. Glad the video helped out. Thank you for watching!
$865??? That's insane! This is a $500 job at most. We were just quoted $469 for our soon-to-be 2003 Murano. My 2004 Maxima may need new valve cover gaskets now, too, which sucks because I just did my spark plugs last summer and the intake manifold was a PITA.
Evan Ganske sucks you have to go back in there. The good new is now you know how it comes apart and it will go fast.
Just finished replacing valve covers and gaskets on my wife's 3.5 liter 03 Altima. Your video helped immensely and just wanted to let you know that I appreciated your effort putting this together! Thank you!
Tom Love awesome your wife's gonna be very happy. Glad to help and thank you for watching and writing!
@@HowtoAutomotive 7?.uuu&NM
K
Thanks for the video and the well explained instructions! I now know that I can’t do this repair on my own! I appreciate you from a USMC veteran! Happy New Year
Glad the video helped you make the right decision on repair thank you for watching and your service!
I have a 2004 Nissan Altima and it is exactly the same. I reviewed a couple other videos and yours was the best. The front was not as involved as the rear but the rear was not difficult. No special tools were required as I saw in other videos. Don't know why the customer did not go for the entire valve cover with the new spark plug seals. I have had several Nissans and the spark plug seals leaking was a common maintenance item. Although the Altima did not have any leaky seals like the Murano you worked on. Like your top poster, I will replace everything I can while it is apart, plugs, coils, vent line, etc. You can change the title to include the 3.5 Altima. Thank you for the great assist!
Robert Johnson glad the video helped. Thank you for watching!
The windshield wipers can be removed and then the plastic shroud underneath. Remove the metal pan underneath that and you have easier access to the back of the engine which includes all of those connections from hell on the back of the intake.
Wow!!!!! EXCELLENT VIDEO for the DYI mechanic. BRAVO!!!!!!!
Hello i have a 2003 nisssan murano with oil in the spark plugs. Does that mean i would need new valve covers or just the new gasket should be fine? Great video by the way.
I am planning on replacing both covers. Would it be a problem if I replace the front one first and then the rear one?.. I only have oil coming into #4.
We replaced Vancouver gaskets and now the 05 marano won't idle what have we done ww wrong
Probably didn't connect the throttle body.
I have a2005 marano ai done as you said I thought I won't idle without holding the gas on what have I done need help 9:35
Dang. Lot of work! How much would that job be to change all valve covers and gasket and all ignition coils and spark plugs since it's open already?
I have a white smoke coming on hood on my Nissan Murano but the temperature still cool and no leak. You think is my gasket, and can a liquid sealer can fix it..
Great video, cuts my time in half when you take the guess work out of the picture. Thanks again. Keep up the good work
I know what you mean I use videos as well. Thank you for watching!
Best video ever seen. Understandable, graphics great, thanks
Ratana Nelson thank you!
First off Great Video!! Very helpful!
Now, I Just bought a 2005 Nissan Murano it has 193,000 miles. I changed the cam shaft sensor bank 2, then the egr vaccum thing. And all of a sudden when I was on the highway the engine began to bog down and was having a hard time accelerating. I pulled over and the engine was smoking because oil shot out from some where. It looks like it was in the front because the oil shot all over my fan in the front? Could this be because the valve cover gasket needs to be replaced in the front?? Idk where this oil came from.
1.) What is a good cost estimate for parts and labor to replace just the gaskets? What is a good cost estimate for parts and labor to replace the valve cover and gaskets?
$850 my guess
,i have to do this job tomorrow on a 2004 Murano ,thanks for the video
Me too
Oscar Brivio good luck. Thank you for watching!
How much does something like this cost?
Hey brother. I have 2007 murano but it is burning oil and reduce a lot with white smoke. What do think is problem? From paraguay
Your dewalt ratchet is amazing
You added a dime-sized glob of silicone sealant in the corner of where ends of the valve cover where the cover curves up. Is that all you need? In the owners manual it shows a line of silicone that starts at the first bolt-hole and extends to the top of the curved portion on of the valve cover. Should I follow the service manual or what you did? Thanks.
Doug Burckhardt all you need is a small amount. I have seen if you use to much silicone you can create uneven surfaces and create leaks.
The Murano you worked on is missing the bracket holding the power steering hose up. That is a 12mm bolt and is a total bitch to remove and it also keeps you from pulling the manifold forward enough to undo the clip holding the bottom portion of that plug in place thus forcing you to remove the 10mm bolt holding THAT bracket on. BTW, I didn't have to pinch off the water hoses, and yes, the system was full.
Note to anyone attempting to do this at home, BUY THE VALVE COVER SET!!! I was hoping I wouldn't need them and ended up wasting 31 bucks on gaskets as the rear cover was bad. Since you are in there...might as well change the plugs (mine were burned open to 58 thousandths) and the coil packs so you won't have to pull that damn intake off AGAIN.
I started to get white smoke coming out of my exhaust right after this install. Everything looked right. No drips, Car seems to be running fine. But the white smoke seems to come after it sits for a while. Its now a big puff on start up.....white smoke. Any ideas? Please help..I had no smoke from exhaust before this repair. Im not leaking oil anywhere.
trickplay461 check the PCV system. Make sure the vent tube that goes from Valve Cover to Valve Cover is plugged in and is not plugged. Replace the pcv Valve.
Bro, you rock! You have answered all my questions in a timely manner. My mechanic said he checked the PVC system and everything was good. Smoke for 3 months out of exhaust! Finally I wrote you and tried your advice. PVC valve was clogged !!! New valve and new air filter, which was choked with dirt and no more smoke!!! Thank you so much.
Abel Figueroa glad it all worked out thank you for sharing!
I don't have any smoke thank God but I'm burning oil reading forums and watching videos im convinced my issue is the PCV valve because I did everything new valve covers gaskets filters all the goods and in 3 weeks I needed oil after all that 3-4 days ago I put 5qts 5w-30 and already need possilly another qt but after watching this I definitely dont wanna do it myself its in the back smh I'm no mechanic so I gotta pay sucks man all this money I put in this murano this year its crazy
Anyone in Los Angeles can do this I will pay
Awesome video not to many people splaind it like that and make it like that
Will the torque specs be the same on the plastic intake manifold on the 2011 Nissan Murano 3.5l??
great video we followed and all was well but now have a blown head gasket. do you have any vids on this mine is a 2006 nissan murano with 5.7 l motor
Susan Cox I don't have a video on head gaskets. Sorry your car is down.
Thanks
How to Automotive .. How r u sir . I have problem on my altima v6 2005 leaking oil in spark plug on rear part of engine 2 plugs and blue smoke . Thnk u alot
Dude…. The links for the right stuff i needed 🤌🏼🤌🏼🤌🏼 Great video! Happy new year!! 🎊
Why do you keep calling that Milwaukee driver a Makita?
I know! I bet Milwaukee tools is pissed about that, referring their American tool by Japanese name, over and over. Wow!
Thank you for doing this! It's greatly appreciated.
how hard was to remove and put the valve cover back? I have an 07 murano and I have to replace the front valve cover gasket but there is not much play on the wire harness even by unclipping the wire harness from the brackets especially the one that is right above the cover that goes to the bottom. Is there an easy way to make it more flexible in order to install the cover back again?
My 05 murano has oil leak into the oil tubes, is that a top rubber grommets ,need replacements or what caused the oil to leak into the tubes?
mckoy lach It’s a seal built into the valve cover. On the way to repair is to replace the whole cover itself.
Thank you for sharing your knowledge. I was able to change both my valve covers
Glad the videos helpful. Thank you for watching!
Thank you for the video! I may have a oil leak in my '05 Murano with over 161K miles on it. In late winter, I started getting heavy white exhast smoke when I started up my car. It goes away after a few minutes. About 2 months ago, I had a low oil pressure light on. I regularly had my oil changed, the last time being in January with additional repairs afterwards (new starter, 1 engine coil, camshaft and crankshaft sensors replaced). It didn't make sense that my oil pressure light should be on after spending thousands of dollars on repairs. The car started making churning sounds on acceleration. I learned how to change my own oil and oil filter. The old oil was thick, but smooth (no grit). Once I changed the oil and filter the light went off, the churning sound went away, but I still have that white smoke coming from my car exhaust just after it is turned on. I predominantly took it to the Nissan dealership, but now I am going to fix my car myself. What else should I be look at for the oil leaks?
Antoinette I love my 2007 Nissan Murano with 193,000 miles but mine does leak oil to I had to change the spark plugs at 173,000 miles and did notice 1 spark plug covers in oil and figured that was a valve cover gasket.
im sure you found a fix and or no longer drive the murano but my fix for the white smoke on start was the pcv on the rear valve cover was clogged with oil which made any excess gas and pressure release through my exhaust opposed to the pcv. Also changed spark plugs while i did this so it mightve helped that too
Awesome video and well laid out. The one thing I had to do differently is to use a 12 mm gear wrench on the 2 bolts attached to the rear bracket holding the intake manifold. My 12 mm socket was hard to use back there. After doing this job, the car does not idle so I need to check my work but can't see anything.
If it won’t idle there’s possibly a vacuum leak somewhere. Like you said go back over your work and you’re most likely run a crossed it.
Awesome video, your a good competent automobile mechanic,!!
Thank you!
Do you need the 10 oz bottle of gasket maker or will the 5 oz suffice?
EasyJ 5 should do.
Are those sparks plugs tubes,thread in or insert into with glues?
mckoy lach They’re mounted in the cover itself and they are non-serviceable so you’ll have to buy new valve covers. They’re not that expensive though
I have a question,regarding the O2s11, is it an air fuel ratio sensor or it’s an O2 sensor? And does the air fuel ratio sensor always mounted before the cat or after or it could be either or ? And how do you identify it is an air fuel sensor from O2 sensor?thanks
mckoy lach On some of the earlier models it was oxygen sensors front and rear and the newer ones air fuel ratio is in the front. Air fuel ratio’s sensors always go before the cat and oxygen sensors. The way to tell if you have an air fuel ratio sensor is to look at the under hood label. There’s a section where all the emissions devices are labeled. May see something that looks like this A/F or O2
Dam thats alot of work man. I give u props good jon man
This job is time consuming how long did it actually takes to get this job done. Cause I'm about to work on my wife's 2007 Nissan Murano. I'm waiting for the parts to arrive. I. Also replacing the rack and pinion followed by Oil cooler O-Ring & Oil pan as well. You think it my take me about 4 days? lol!!
Hi friend, where can I buy the spark plug seals for murano 2003 or where can I order them.. Thank you very much
Have a requests for you if you ever get 2010 Nissan Murano for spark plug change can you make a video of it thanks.
john1240able if one comes in I will. Thank you for watching!
Hi, so I have a 2004 Nissan Murano and I'm assuming the gaskets need replacing. The symptoms I'm getting are oil leaking on the front part on the engine and white smoke coming from passenger side after I have driven a short distance. What's your take on this? Thank you
Ras Serrati sounds like it is leaking. But it could be something other than the valve covers. You will need to do a good visual inspection.
How to Automotive thank you, found out I had a cracked spark plug seal and have to replace the whole valve cover.
Ras Serrati crazy that they make you replace the whole cover and not just the gasket seals.
We replaced 05 Marino Val cover gaskets no when we try to star car I want idle with touching the throttle
Awesome! i have a car i brought from copart and its leaking bad. im sure i can do this myself thanks to your vid! Thanks
Take your time and it’s definitely a doable job. Thank you for watching!
No way I have the same problem with one that I bought from copart
Do them one at a time so as to not drop debris in open engine cavities by accident would be a tip you may want to observe as well.
Will this valve cover job resolve hesitation issues on 2004 SE Murano?
MrUwannabet if the oil leak is in the spark plug tube then yes this could help. But there could be a lot of things causing it to hesitate. I would start by pulling code.
I spent over $2,500 on this hesitation problem. Ross Nissan dealer still can't fixed it right & my car still has same issue. I don't want to take it back for 3rd times to that dealer. No more CVT car for me! Thx..
Is it possible for the tube seals to b cracked and pouring oil
sT UrFlat yes that could happen.
My murano has 107,000 miles and I just had my spark plugs, intake manifold gasket and valve cover gasket replaced. I originally planned to only get my spark plugs and intake gasket serviced, but my mechanic noticed some oil leaking around the valve cover, but he said I only needed the gasket. And now I'm worried that I should of replaced the entire valve cover instead of just the gasket. So now my question for you is, will I be expecting any trouble with any type of leak after I just replaced all but the valve cover since I didn't know the seals weren't serviceable?
Chris Keath this is one of those situations where you could be good for a long time or the seals could start leaking into the spark plugs and you have to do the entire job all over. From my experience service writers are afraid to call customers back and try to up sale so they let things like this slide. But in the end they end up costing you more money
Its a Milwaukee m12 lol but I love the video it saved me so much time
Im trying to figuer out why mine is running so bad after i changed my gasket. It ran smoth before the was oil in the spark plug when i pulled the coils can some one get back to me on this
I have a problem like my murano came out code p0507 change spark plugs change valve cover gasket coil, and also the body of acceleration, and also try make him relearn with the scanner and do not want to know what I would advise
Juan Carlos Olea the code means that the idle is to high. So look for vacuum leaks. Gasket came off or hose unplugged. Also something maybe pinched under the intake.
How much does it's the cost for do this job? Some one would say?
$850 I'm guessing
How do you know if this part is bad do you get engine issues or check engine light.
john1240able you will see Oil leaks from the covers.
Thank you for reply back.
I'd like the correct name or part number for the vent line described in the video please.
I have an 05.
I got a misfire on cylinder 3 so I got all the spark plug coils, New spark plugs and I just removed the intake manifold and I found out that the coil was soaking wet with oil. Im not sure if it's cylinder 3. I'm not familiar with nissan but, it's the third one left to right(driver's side)
Will this job fix the problem?
Thank you
chucho 444 Oil on the spark plugs due to the valve cover leaking and you need to replace the bow cover gasket or Val cover. If you clean it out and put the plugs and coil‘s and it will only temporarily fix it. The oil is what’s making it misfire.
How to Automotive sounds good.
I'm going to go ahead and buy it.
Thank you so much for your help.
chucho 444 glad to help. Thank you for watching!
Nice detailed video. Will be using this. Very thorough over many other videos I have watched
Ok bro. I did this but here are my suggestions. I have large hands so a pair of extra long needle nose pliers were huge in reaching lots of small clamps, etc. Lighting is poor so i suggest some powerful lights to make life easier, and finally I over torqued one bolt on the cover which snapped. Torque setting was off on my tool and it was a nightmare to remove!! otherwise great video thank you !!!
Why would the gas not be working after doing this ? The engine started and runs on its own by the throttle does not work it only rolls and did not do this before and tips on if i missed something or did something wrong?
mike jones sounds like you have a large vacuum leak or something is in plugged. Pull codes if you can and go back over your work.
I replace the frobt valve cover but. Now my murano won't start it just crank but won't start i dont know why . It was fine at first
How much the job like this cost, I am needed to replace Valve gaskets on my 05 MURANO?
$850 I'm guessing
Hi...I'm about to attempt this. You are recommending the replacement of all the gaskets? I saw you posted links for the different ones. I did not see the link for the vent line connecting the valve covers. Could you add this? I could not find it on Amazon, like I did the other links. Thanks...good video.
Abel Figueroa hello I guess I forgot to put that link in there. I just updated it in the video description it's the fourth link down. It's titled Nissan Murano crankcase ventilation blow by hose. Thank you!
Abel Figueroa good luck with the job. Let us know how it works out.
Thx, again, I'm asking SHOULD all the gaskets u listed need replacement? or can i do just the valve cover? my local shop wants $600 including new spark plugs.. and they are not replacing the cover... Just the gasket. I'm doing new covers and want to know if all the gaskets u mentioned are must haves. thank you!
Abel Figueroa it's possible to use the throttlebody gasket and in a pinch I have reuse the intake gasket. But you leave yourself open for a future problem. As far as the tube seals on the valve covers it's a lot of work so I would change them out. The covers are that expensive.
Ive read countless times that the seals are not serviceable on the valve covers. am i wrong? i have the 06 murano awd. really appreciate the fast response.
Get Done on my car this weekend 2007 nissan murano
Are you located in the oc ca area
San Diego
I unplugged the throttle body when doing this since it was very dirty and my car revs on its own up and down and doesnt idle. what can i do to fix that?
@Youraverage_savage you probably have fixed it already but in that case you need to do an idle relearn process
What the average price to do all the work. And do you have a link to fix power steering leak on a Nissan
just did this job and know i have misfire in all cylinders (did a sparkplug change regular ngk sparkplugs not OE and i gapped at .044) Help please i took this apart 5 times already to see what is wrong cant find nothing 😫
I have a 2004 Nissan murrano when I press the gass and start driving and stars hesitating to go . I have no check engen lights on
Johnny Placido I would still try pulling the code even though the light is not on. Most likely a misfire. If you check mode nine in generic it may tell you which cylinder is misfiring. Also injector failure is comment on that vehicle. Another thing because it is low engine oil timing is controlled by oil pressure.
Very helpful & your knowledge is so helpful many thanks
paul waller glad to help. Thank you for watching!
I love my 2007 Nissan Murano with 193,000 miles but mine does leak oil to I had to change the spark plugs at 173,000 miles and did notice 1 spark plug covers in oil and figured that was a valve cover gask
NFL YoungBoy Yeah that’s gonna be a valve cover leak. Unfortunately the seals are replaceable the whole cover has to be changed. Kind of a dumb design.
Great video, shame its such a poor design... in my experience the plug seals go first so best to just replace the covers. But I like what you showed and how you do it. Good job. 🙂
Hey anybody I have a 2007 Nissan Murano with 193,000 miles and I was just doing preventive maintenance by changing the valve covers because when I changed the spark plugs at 170,000 miles one spark plug was covered in oil the ceramic and where it sparks at and changed the 3 rear ignition coils but anyways this week I replaced the valve covers front and rear and that took me 4 days since it’s very cold in Chicago and it was snowing and so when I was working on the front one I had the front ignition coils in a drawer and they were kind of getting snowed on so I just wiped them off and closed the dresser to dry them and install them tomorrow so when I put the car back together I had a code that read P0081 then I looked around the engine and I just reconnected a harness and I reset the code then it was running fine for 30 seconds then it got to running rough again and got a code P0300 and wonder if it’s the front ignition coils but I replaced all the spark plugs at 170,000 miles and only the rear 3 ignition coils
Yo soy amante al primer 2i003 y 2006 que soy dueno por anos y es el mejor suv y el precio siempre se mantiene el mismo. The best and 1 reliable suv ever.
Makita m12? You meant Milwaukee m12 fuel rite?
I think this is the problem that i have with my 2007 murano
I see oil leaking from the middle/front of the engine, behind the a shield. White smoke creates as the liquid burns in the catalytic converter
U keep.cslling your Milwaukee power wrench a Makita bud!! Great video on the repair, just replaced both my valve covers due to a massive oil leak and also had to replace my power steering fluid lines due to another bad leak. Great timing to do at same time, along with full tune-up and now vehicle runs way better with no oil/fluid leaks anymore! Thanks chief!
Liked, and subscribed; thank you very much Sir! Great job.
What is the purpose of the vent hose?
Manuel Salgado inside the engine is moving air an it vents it from the left side to the right side of the engine.
How to Automotive I have a 2005 quest and at the top left of the valve cover there is a hose I broke when replacing the valve cover. Is that the same vent hose? Thanks for replying
Manuel Salgado sorry to hear you broke that hose. Yes it's the vent hose.
Excelente calidad de video, muy buena guia !
First I would like to say thank you for this video! I’m working on a 2005 Murano and this was extremely helpful. While replacing my sparc plugs, I noticed one of the rear sparc plugs had oil so I also replaced the rear valve cover with a brand new one which also included a new pcv valve. I also replaced the hose that connects from the front to rear valves. When I first started the car, there was a lot of white smoke coming from the exhaust. I saw another person commented with the same issue which turned out to be the pcv valve. My pcv is brand new though. Any other thoughts? Thanks again
Matt Wall If you only got the smoke the one time after the repair then I would suspect that some of the oil that leaked in the spark plug tube drain into the combustion when doing the repairs. If it’s just a little oil it’ll burn off pretty quickly and you’ll never see it again unless you have an internal engine problem.
You were correct. It only occurred after the very first start right after the work was completed. Never happened again.
Matt Wall pretty common for that to happen. Nothing you need to do but drive it now.
What’s the name of that hose?
I followed the torque specs but my one bolt snap whats the exact torque specs 2006 nissan murano please help
I been having a hard time to find someone to locate imrc valve on my 07 Nissan murano
Valencia Cook I'm not sure what you mean by IMRC?
IMRC intake manifold..
intake manifold runner control
How many miles on this Murano?
john1240able it had around 115K
How much is a job like this?
Only 1 comment referring to the ratchet being Milwaukee, not Makita. Cant believe so many people missed it.
How much does a Job like this cost?
Thanks for sharing
Now why do you have to remove the intake just to replace the valve cover gasket?????? I do not understand
H C On the six cylinder there’s two valve covers and the intake completely covers up the back one.
Thanks! Very well explained...
Well documented very informative.
FANTASTIC
Changed mine about a week ago, last night it started acting up again sputtering and smelling of burnt oil... What would cause it to do this again already
Brian King sorry you’re having this trouble. What comes to mind is either something didn’t get put together just perfectly or you have a bad PCV causing pressure to build up inside the crank case.
Great video,thanks
mckoy lach glad to help. Thank you for watching!
can you reach the bank 1 cat from there?
Daniel Day do that from underneath the car
Great video...well done. Thank you.
Rick Walt thank you!
👍🏼 nice!!! Great video .... good job...
Michaelangelic thank you!