My CNC Workflow Bulkman 1010 Part 1 ddcs v3.1

Поділитися
Вставка
  • Опубліковано 27 січ 2025

КОМЕНТАРІ • 13

  • @MarcelRokers
    @MarcelRokers 5 місяців тому +1

    Thanks for your videos they really help me setting up my new cnc machine (Bulkman with DDCSv3.1). Can you share your post process file (mm), like you suggested in your video?

    • @weitlingD3P
      @weitlingD3P  5 місяців тому

      Thanks for watching. by following the link below, you will find files for mm and inch. Happy Carving.
      1drv.ms/u/s!AgaOae17V8HihJd3_5JCISs-moUw3g?e=GgW4ZM

  • @drejegetahun9916
    @drejegetahun9916 2 роки тому +1

    which pins did you use to connect your probe and limit switches on your controller?

    • @weitlingD3P
      @weitlingD3P  2 роки тому +1

      It is a combination of pins. It very well discripet in the manual page 16

  • @drejegetahun9916
    @drejegetahun9916 2 роки тому

    okay thank you for that, another question can see my table size on the DDCSv3.1 controller, like i would on mach3 because when i load my g code i don't know where my machine is gonna cut my work piece and my machine keeps going in the wrong direction, i use vetric aspire to design and generate my G codes, i usually work in the middle of the software which i set to be 1200*1200mm the size of my machine.

    • @weitlingD3P
      @weitlingD3P  2 роки тому

      Move the tool to the position you want tobe zero then zero out X and Y axis

  • @drejegetahun9916
    @drejegetahun9916 2 роки тому +1

    and can i work without limit switches

    • @weitlingD3P
      @weitlingD3P  2 роки тому +1

      Hi Yes it can :)

    • @drejegetahun9916
      @drejegetahun9916 2 роки тому

      @@weitlingD3P how would you recommend i do that with out limit switches, homing and probing

    • @weitlingD3P
      @weitlingD3P  2 роки тому

      @@drejegetahun9916 I only do the Homing that is in the coordinate system 53, because I then use the G54 when working Probing and tool change is done in G53 (Machine coordinate) this is a safe way to do it In G54 my zero position can be at different places. for coordinate systems take a look here ua-cam.com/video/dUWv5AK0fFc/v-deo.html

  • @mayol74
    @mayol74 3 роки тому +1

    Fusion 360 har en gratis del til hobbyister😊

    • @weitlingD3P
      @weitlingD3P  3 роки тому

      Ved det. Har prøvet den, Synes bare at der hurtigt kommer nogle begrænsninger

  • @drejegetahun9916
    @drejegetahun9916 2 роки тому

    hey how can i get a contact with you can i send you my g codes and tell me what i'm doing wrong