It's 2020 and I've got over $60,000 in audio and lighting equipment. It's amazing to think this little MM1 mixer was where it all started. This mixer is STILL working great and is now used as a tabletop mixer to adjust audio levels for my mobile movie night rig.
Update 2018: Still using this little guy as a mic mixer and iPad mixer in my home. I'll use it at a gig for a wedding ceremony - has never failed me in all the time I've owned it.
UPDATE 2017: Many active powered speakers are now ditching the built in mini mixers. Compatibility is becoming an issue for this GeminiMixer to plug directly into the speakers. Fox example: New JBL EON 15" Active speakers only accept XLR and 1/4" input source. This mixer is intended to output RCA. Just be sure to see if this fits your needs by being compatible with the equipment you intend to use it with.
3:30 when you say that the A line feeds into your left headphone and B line is for your right headphone, is there a way to mix it where both A and B are played through both headphones at the same time?
lgtrz26 , You can use this mixer with a single speaker... specifically using the Harbinger speaker with built-in mixer: run Red/White audio lines from the output "Master" on mixer to the red/white "Line In" input just below the two microphone inputs on the Harbinger speaker's mixer.
It's 2020 and I've got over $60,000 in audio and lighting equipment. It's amazing to think this little MM1 mixer was where it all started. This mixer is STILL working great and is now used as a tabletop mixer to adjust audio levels for my mobile movie night rig.
I tried it with my techniques analog turtables and the sounds was super low and there is no ground. Am I doing something wrong?
@@dspln7949 get a phono pre-amp
Update 2018:
Still using this little guy as a mic mixer and iPad mixer in my home. I'll use it at a gig for a wedding ceremony - has never failed me in all the time I've owned it.
Thank for the intro. It's 2023 and the cost looks to be about $62 from Amazon now.
UPDATE 2017:
Many active powered speakers are now ditching the built in mini mixers. Compatibility is becoming an issue for this GeminiMixer to plug directly into the speakers.
Fox example: New JBL EON 15" Active speakers only accept XLR and 1/4" input source. This mixer is intended to output RCA.
Just be sure to see if this fits your needs by being compatible with the equipment you intend to use it with.
Cable adapters. Seismic Audio 3 Foot XLR Dual Male Patch Cable-2-XLRM to 2-RCA Audio Cord (SAXFRM-2X3) www.amazon.com/dp/B01A9D33F6/ref=cm_sw_r_cp_api_glc_fabc_GJqZFbAKK754E?_encoding=UTF8&psc=1
Whats a slider?? I think you mean " Cross Fader" they will always be called a Cross fader mate..
I’m just going to take the master out into the aux in on a small Yamaha mixer so there’s a way to go XLR to my powered speakers.
3:30 when you say that the A line feeds into your left headphone and B line is for your right headphone, is there a way to mix it where both A and B are played through both headphones at the same time?
Plastic fader cap is a good thing .
Easy enough to find rca to xlr cables. Just ordered this as a backup.
Good Mixer and I Love it cause it’s Compact but I don’t Believe the Fader is Replaceable
Hi. I wanna buy one to use it as a karaoke device. How does the mic works? How do i control the volume of the mic? Great review
do the gain/trims at the top affect the headphone cue volume?
Slider = crossfader
i need a way to add 2 more channels to use as deck 3 and 4 on my 2 channel dj mixer, will this work? how would i set it up?
No one should ever use a mic input as a line input, such as daisy chaining a mixer into this mixer via mic input.
I have the same Harbinger speaker, but just one, do I need 2 speakers for this mixer to work?
lgtrz26 ,
You can use this mixer with a single speaker...
specifically using the Harbinger speaker with built-in mixer: run Red/White audio lines from the output "Master" on mixer to the red/white "Line In" input just below the two microphone inputs on the Harbinger speaker's mixer.
How’s the cross fader on this? Is it loose enough for crab scratching?
Did you ever get an answer for this question anywhere else? I need something affordable to scratch.
What kind of cord will I need to connect this to my Mac since I want to record a mix? And do you know what DJ software programs it'll work with?
You would need to connect to a serato sl box in order to use dvs with your mac
yo kermit
Does this have a preamp inside?
Nop! no preamp ;O(
This is not good for DJing the best mixer is the NUMARK M2 2 CHANEL MIXER yesssssss gawd
It's junk. Don't waste your money. It's cheap for a reason!