Hi Aaron, thank you so much for this informative video. I’ve had trouble following some of the other videos on this topic bit on yours I was able to follow along easily. Thanks again, God Bless
Hello Aron and good day, this was a very informative it was explained in great detail and the average person can understand this, its a sign of a good teacher. keep up the videos.thanks RTQ
Is it normal that after installing new strings and cables to find that your peak draw weight might have dropped 4/5 pounds, and is the correction twisting the cables each cable the same amount to get that draw weight back ?
So my first go around with installing my new strings on my Phase 4 33 didn't go too well, that's because I did not follow specific procedures, needless to say I spoke to Aaron over the phone, had another go at it with a new set and everything ended up spot on, had to adjust one cable to get my cam timing proper, but once all was said and done, Peak weight was exactly 65.3, Spot on, axle to axle was 33, brace height was 6.5, my draw length was exactly 29, everything to spec the way it should be, so do yourself a favor and watch this video 250 times lol and follow specifically when he speaks on the yoke twists and The cable twists ...
Are there camo gas bow strings for the V3x 29?? Iv been looking for custom camo or even that what was it called buck skin silver?? I'd even run them..but yeah could u answer that question foe me please..and thank you
Hello Anthony, we have our Ghost XV Camo and in High Octane, we have Winter Camo, Tactical Camo, Woodland Camo, Forest Camo, Camo, and Autumn. Some other solid color options that are great for hunting strings are Buckskin, Gunmetal, Kiwi, and OD Green. Each of those colors are great serving options as well! If you'd like to take a look at some of these string colors on bows, check out our Color Galley here: gasbowstrings.com/the-color-gallery/
Is the cable routing on the rollers at 12 minute mark correct, and is that the same on the phase 4 29? I am seeing discrepancy on this as I install my new GAS string.
Hello. If you could email us at info@gasbowstrings.com, we will get a string tech to help you out with your strings and answer any questions you may have.
makes sense now why sometimes your strings seem to suck, maybe you should tape the part that goes through to puk to stop it losing twists, paperclip will only prevent the cable twist from coming out, not the puk end
Had my local shop who is a GAS dealer install a set of ghost strings on my vxr 31.5 axle to axle is now at 31 and 3/4 inch anything need to be done or is that normal only have about 200 shots on them?
i had the z2 ,creed ,and the mission blaze bows now 10 years later i want a new bow i ddiint stay up to date with all the hype ,and i thought by now in 2023 we would have bows all at 350 fps by now ,but the new bows compared to the bows i already own nothing hasnt changed ,only big ass limbs cams ,and risers performance is the same
Yeah glad to see a young man learning how to do this i been working on the bows for the past 40 years glad to see young people learning this.
I finally broke down and got a press so now I can do string changes. Awesome video. Very thorough.. thank you.
Same, what a luxury I didn’t know I needed!
I’m gonna get a press. Soon I can say the same.
Hi Aaron, thank you so much for this informative video. I’ve had trouble following some of the other videos on this topic bit on yours I was able to follow along easily. Thanks again, God Bless
Great time listening to your string replacement. Mathews and a San Diego bow shop said the lower cable goes on the outside cable.
I'm struggling with this....all pictures look like the lower cable goes on the outside but this clearly says the opposite
Hello Aron and good day, this was a very informative it was explained in great detail and the average person can understand this, its a sign of a good teacher. keep up the videos.thanks RTQ
Very helpful. Got a new set of GAS XV camo strings and cables on my VXR. They work great!
Just ordered my first set of gas bow strings. Installing later this week
nice, helps explain some elements I did not understand.
I’m glad I watched this. Didn’t no not to crank the axle screws down, love my gas ghost by the way. Keep making quality and you will keep business.
Is it normal that after installing new strings and cables to find that your peak draw weight might have dropped 4/5 pounds, and is the correction twisting the cables each cable the same amount to get that draw weight back ?
Who made the bow press and draw bar you use in these videos? Are they custom built?
So my first go around with installing my new strings on my Phase 4 33 didn't go too well, that's because I did not follow specific procedures, needless to say I spoke to Aaron over the phone, had another go at it with a new set and everything ended up spot on, had to adjust one cable to get my cam timing proper, but once all was said and done, Peak weight was exactly 65.3, Spot on, axle to axle was 33, brace height was 6.5, my draw length was exactly 29, everything to spec the way it should be, so do yourself a favor and watch this video 250 times lol and follow specifically when he speaks on the yoke twists and The cable twists ...
What model press is that? And what press models do you recommend for a Lift 33?
Are there camo gas bow strings for the V3x 29?? Iv been looking for custom camo or even that what was it called buck skin silver?? I'd even run them..but yeah could u answer that question foe me please..and thank you
Hello Anthony, we have our Ghost XV Camo and in High Octane, we have Winter Camo, Tactical Camo, Woodland Camo, Forest Camo, Camo, and Autumn. Some other solid color options that are great for hunting strings are Buckskin, Gunmetal, Kiwi, and OD Green. Each of those colors are great serving options as well! If you'd like to take a look at some of these string colors on bows, check out our Color Galley here: gasbowstrings.com/the-color-gallery/
bottom cable on the inside roller for all models??? I shoot a vertix, thanks!
What about the new lifts?
Can you do one of these for a Solution ss?
Is the cable routing on the rollers at 12 minute mark correct, and is that the same on the phase 4 29? I am seeing discrepancy on this as I install my new GAS string.
Hello. If you could email us at info@gasbowstrings.com, we will get a string tech to help you out with your strings and answer any questions you may have.
makes sense now why sometimes your strings seem to suck, maybe you should tape the part that goes through to puk to stop it losing twists, paperclip will only prevent the cable twist from coming out, not the puk end
How do you get the Axle out of a Title 38? I am trying to change the Yoke Strings and cannot get the Axle out the way you showed.
Hello, if you could email us at info@gasbowstrings.com, we will get a string tech to help you out further. You can also call us at (606) 612-5156!
Had my local shop who is a GAS dealer install a set of ghost strings on my vxr 31.5 axle to axle is now at 31 and 3/4 inch anything need to be done or is that normal only have about 200 shots on them?
Hello! I would send an email to our techs at info@gasbowstrings.com, they will be able to help you out further!
I have one question 🙋🏼♂️ what is phase 4a v3xs vxrs v3s and phase 433 ???
Jk!!! 😅
What about a lift 29.5?
i had the z2 ,creed ,and the mission blaze bows now 10 years later i want a new bow i ddiint stay up to date with all the hype ,and i thought by now in 2023 we would have bows all at 350 fps by now ,but the new bows compared to the bows i already own nothing hasnt changed ,only big ass limbs cams ,and risers performance is the same
Hi can you tell me which press you use. Please.
Looks like a spikes press
so who makes that vice?
Was wondering the same. The press looks like an ATC Spikepress with Mathews blade pins. It looks very efficient!
It's called a press, and it's not even close to worth it for a guy at home. That's for guys pressing bows every day, multiple times a day.
@WolfinWolvesClothing713.
"Worth it" is a relative term, depends on your cash situation 😊
Wut bout for recurve
What about lift 29.5?